This patch enables BL2 to run in root world (EL3) which is
needed as per the security model of RME-enabled systems.
Using the existing BL2_AT_EL3 TF-A build option is not convenient
because that option assumes TF-A BL1 doesn't exist, which is not
the case for RME-enabled systems. For the purposes of RME, we use
a normal BL1 image but we also want to run BL2 in EL3 as normally as
possible, therefore rather than use the special bl2_entrypoint
function in bl2_el3_entrypoint.S, we use a new bl2_entrypoint
function (in bl2_rme_entrypoint.S) which doesn't need reset or
mailbox initialization code seen in the el3_entrypoint_common macro.
The patch also cleans up bl2_el3_entrypoint.S, moving the
bl2_run_next_image function to its own file to avoid duplicating
code.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I99821b4cd550cadcb701f4c0c4dc36da81c7ef55
Only BL32 (SP_min) is supported at the moment, BL1 and BL2_AT_EL3 are just
stubbed with _pie_fixup_size=0.
The changes are an adaptation for AARCH32 on what has been done for
PIE support on AARCH64.
The RELA_SECTION is redefined for AARCH32, as the created section is
.rel.dyn and the symbols are .rel*.
Change-Id: I92bafe70e6b77735f6f890f32f2b637b98cf01b9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The use of end addresses is preferred over the size of sections.
This was done for some AARCH64 files for PIE with commit [1],
and some extra explanations can be found in its commit message.
Align the missing AARCH64 files.
For AARCH32 files, this is required to prepare PIE support introduction.
[1] f1722b693d ("PIE: Use PC relative adrp/adr for symbol reference")
Change-Id: I8f1c06580182b10c680310850f72904e58a54d7d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
aarch32 CPUs speculatively execute instructions following a
ERET as if it was not a jump instruction. This could lead to
cache-based side channel vulnerabilities. The software fix is
to place barrier instructions following ERET.
The counterpart patch for aarch64 is merged:
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=f461fe346b728d0e88142fd7b8f2816415af18bc
Change-Id: I2aa3105bee0b92238f389830b3a3b8650f33af3d
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Prior to entry into BL32 we set the SPSR by way of msr spsr, r1.
This unfortunately only writes the bits f->[31:24] and c->[7:0].
This patch updates the bl2 exit path to write the x->[15:8] and c->[7:0]
fields of the SPSR. For the purposes of initial setup of the SPSR the x and
c fields should be sufficient and importantly will capture the necessary
lower-order control bits that f:c alone do not.
This is important to do to ensure the SPSR is set to the mode the platform
intends prior to performing an eret.
Fixes: b1d27b484f ("bl2-el3: Add BL2_EL3 image")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
The SCTLR.DSSBS bit is zero by default thus disabling speculative loads.
However, we also explicitly set it to zero for BL2 and TSP images when
each image initialises its context. This is done to ensure that the
image environment is initialised in a safe state, regardless of the
reset value of the bit.
Change-Id: If25a8396641edb640f7f298b8d3309d5cba3cd79
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a2 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This avoids the following warnings:
no previous prototype for 'bl2_arch_setup' [-Wmissing-prototypes]
no previous prototype for 'plat_log_get_prefix' [-Wmissing-prototypes]
Also correct a compilation issue if BL2_IN_XIP_MEM is enabled:
uintptr_t is not defined.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
When using BL2_EL3, we need to ensure that lr_svc is
properly given to bl32 as it was previously made by bl1.
FixesARM-Software/tf-issues#562
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
This patch introduces a new BL handover interface. It essentially allows
passing 4 arguments between the different BL stages. Effort has been made
so as to be compatible with the previous handover interface. The previous
blx_early_platform_setup() platform API is now deprecated and the new
blx_early_platform_setup2() variant is introduced. The weak compatiblity
implementation for the new API is done in the `plat_bl_common.c` file.
Some of the new arguments in the new API will be reserved for generic
code use when dynamic configuration support is implemented. Otherwise
the other registers are available for platform use.
Change-Id: Ifddfe2ea8e32497fe1beb565cac155ad9d50d404
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This patch enables BL2 to execute at the highest exception level
without any dependancy on TF BL1. This enables platforms which already
have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL
stages without need for BL1. This is not currently possible because
BL2 executes at S-EL1 and cannot jump straight to EL3.
Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.
NOTE: Files that have been imported by FreeBSD have not been modified.
[0]: https://spdx.org/
Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Introduce new build option ENABLE_STACK_PROTECTOR. It enables
compilation of all BL images with one of the GCC -fstack-protector-*
options.
A new platform function plat_get_stack_protector_canary() is introduced.
It returns a value that is used to initialize the canary for stack
corruption detection. Returning a random value will prevent an attacker
from predicting the value and greatly increase the effectiveness of the
protection.
A message is printed at the ERROR level when a stack corruption is
detected.
To be effective, the global data must be stored at an address
lower than the base of the stacks. Failure to do so would allow an
attacker to overwrite the canary as part of an attack which would void
the protection.
FVP implementation of plat_get_stack_protector_canary is weak as
there is no real source of entropy on the FVP. It therefore relies on a
timer's value, which could be predictable.
Change-Id: Icaaee96392733b721fa7c86a81d03660d3c1bc06
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
There are many instances in ARM Trusted Firmware where control is
transferred to functions from which return isn't expected. Such jumps
are made using 'bl' instruction to provide the callee with the location
from which it was jumped to. Additionally, debuggers infer the caller by
examining where 'lr' register points to. If a 'bl' of the nature
described above falls at the end of an assembly function, 'lr' will be
left pointing to a location outside of the function range. This misleads
the debugger back trace.
This patch defines a 'no_ret' macro to be used when jumping to functions
from which return isn't expected. The macro ensures to use 'bl'
instruction for the jump, and also, for debug builds, places a 'nop'
instruction immediately thereafter (unless instructed otherwise) so as
to leave 'lr' pointing within the function range.
Change-Id: Ib34c69fc09197cfd57bc06e147cc8252910e01b0
Co-authored-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch adds generic changes in BL2 to support AArch32 state.
New AArch32 specific assembly/C files are introduced and
some files are moved to AArch32/64 specific folders.
BL2 for AArch64 is refactored but functionally identical.
BL2 executes in Secure SVC mode in AArch32 state.
Change-Id: Ifaacbc2a91f8640876385b953adb24744d9dbde3
Zelalem Aweke
Yann Gautier
Madhukar Pappireddy
Soby Mathew
Bryan O'Donoghue
John Tsichritzis
Antonio Nino Diaz
Lionel Debieve
Roberto Vargas
dp-arm
Douglas Raillard
Jeenu Viswambharan
Yatharth Kochar