This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.
NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.
Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
1. This removes hardcoded iomux/clk/addr configuration for debug uart,
provides possibility (as a workaround, till that information isn't
provided via DT) to set this configuration during compile time via
IMX_DEBUG_UART build flag.
Also for Colibri i.MX8QXP different pinmux configuration is applied
for UART3, FLEXCAN2_RX/TX pads are muxed to ADMA_UART3_RX/TX.
2. Having DEBUG_CONSOLE enabled without enabling DEBUG_CONSOLE_A35
doesn't make sense (since UART pinmux/clock configuration is applied
for UART only when DEBUG_CONSOLE_A35 is enabled. Check similar commit
for i.MX8QM 98a69dfd4a("plat: imx: imx8qm: apply clk/pinmux
configuration for DEBUG_CONSOLE")).
Usage:
$ make PLAT=imx8qx IMX_DEBUG_UART=3 DEBUG_CONSOLE=1 bl31
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Change-Id: I5d04939b2e8ee1a5f4b2f3c6241977d3c6e91760
This patch provides separation of GICD, GICR accessor
functions and adds new macros for GICv3 registers access
as a preparation for GICv3.1 and GICv4 support.
NOTE: Platforms need to modify to include both
'gicdv3_helpers.c' and 'gicrv3_helpers.c' instead of the
single helper file previously.
Change-Id: I1641bd6d217d6eb7d1228be3c4177b2d556da60a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
On i.MX8QM/i.MX8QX with system controller inside, the SRTC is
managed by SCFW(system controller firmware) and some functions
like setting SRTC's time etc. can ONLY be requested from secure
world, so SIP runtime service is needed for such kind of operations,
this patch adds SRTC SIP runtime service support for i.MX8QM and
i.MX8QX.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
This patch makes the build system link the console framework code by
default, like it already does with other common libraries (e.g. cache
helpers). This should not make a difference in practice since TF is
linked with --gc-sections, so the linker will garbage collect all
functions and data that are not referenced by any other code. Thus, if a
platform doesn't want to include console code for size reasons and
doesn't make any references to console functions, the code will not be
included in the final binary.
To avoid compatibility issues with older platform ports, only make this
change for the MULTI_CONSOLE_API.
Change-Id: I153a9dbe680d57aadb860d1c829759ba701130d3
Signed-off-by: Julius Werner <jwerner@chromium.org>
- Migrate to new GIC interfaces.
- Migrate to bl31_early_platform_setup2().
- Remove references to removed build options.
Change-Id: Ia7c63f75325ea4b41e32a9de3f01b0007d0ae210
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Add domain suspend/resume support, Linux kernel
can "echo mem > /sys/power/state" to put system
into suspend mode, all CPUs and cluster will be
powered off and can be waked up if irq pending
in GIC, tested on i.MX8QX MEK board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Add system power off support for i.MX8QX,
when Linux kernel issues "poweroff" command,
TF-A will send command to inform system
controller to power off whole board according
to board design, tested on i.MX8QX MEK board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
NXP's i.MX8QX is an ARMv8 SoC with 4 Cortex-A35 cores and
system controller (Cortex-M4) inside, documentation can
be found in below link:
https://www.nxp.com/products/processors-and-microcontrollers/
applications-processors/i.mx-applications-processors/i.mx-8-processors:IMX8-SERIES
This patch adds support for booting up SMP linux kernel (v4.9).
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>