Depending on the shell used, the grep command can fail, leading to
a wrong dtc version detection. Correct that by adding quotes.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I329ec929559c94bf1bf99b127662c9d978e067cf
* changes:
refactor(stm32mp1-fdts): remove nvmem_layout node
refactor(stm32mp1): drop the "st,stm32-nvmem-layout" node
refactor(st): remove useless includes
As part of the RFC:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/13651,
this patch adds the 'cm_prepare_el3_exit_ns' function. The function is
a wrapper to 'cm_prepare_el3_exit' function for Non-secure state.
When EL2 sysregs context exists (CTX_INCLUDE_EL2_REGS is
enabled) EL1 and EL2 sysreg values are restored from the context
instead of directly updating the registers.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I9b071030576bb05500d54090e2a03b3f125d1653
Used MBEDTLS_CONFIG_FILE macro for including mbedTLS
configuration.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Change-Id: I374b59a31df3ab1e69481b2c37a6f7455a106b6e
In some implementations of dtc tool (e.g. with yocto), there can be a 'v'
at the beginning of the version, and a '+' at the end. Just keep numbers
then, with a grep -o.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I180e97ab75ba3e5ceacb4b1961a1f22788b428a3
There are plans to contribute a generic MHU driver to the TF-A code
base in the short term.
In preparation for this, rename the Corstone-700 MHU driver source
files and prefix them with the name of the platform to avoid any
ambiguity or name clashes with the upcoming generic MHU driver. Also
rename the header guard accordingly.
This renaming is inline with other platform-specific MHU drivers, such
as the ones used on Broadcom [1], Socionext [2] or Amlogic [3] platforms.
[1] plat/brcm/common/brcm_mhu.h
[2] plat/socionext/synquacer/drivers/mhu/sq_mhu.h
[3] plat/amlogic/common/aml_mhu.c
Change-Id: I8a5e5b16e7c19bf931a90422dfca8f6a2a0663b4
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Simplify the DT parsing by removing the parsing of the nvmem layout node
with "st,stm32-nvmem-layout" compatible.
The expected OTP NAME can directly be found in a sub-node named
NAME@ADDRESS of the BSEC node, the NVMEM provider node.
This patch also removes this specific binding introduced for TF-A.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Ic703385fad1bec5bef1cee583fbe9fbbf6aea216
The stm32mp_dt.c file does not need anything from DDR header files.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ibfe23204d68ee2e863cd2eda3d725baa830b729a
Add a dummy realm attestation key to RMMD, and return it on request.
The realm attestation key is requested with an SMC with the following
parameters:
* Fid (0xC400001B2).
* Attestation key buffer PA (the realm attestation key is copied
at this address by the monitor).
* Attestation key buffer length as input and size of realm
attesation key as output.
* Type of elliptic curve.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I12d8d98fd221f4638ef225c9383374ddf6e65eac
Add QDS support for ls1088a.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6c7a7a23fa6b9ba01c011a7e6237f8063d45e261
The LS1088A reference design board provides a comprehensive platform
that enables design and evaluation of the product (LS1088A processor).
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: If4ca24fcee7a4c2c514303853955f1b00298c0e5
LS1088A is a cost-effective, powerefficient, and highly integrated
SoC device featuring eight extremely power-efficient 64-bit ARM
Cortex-A53 cores with ECC-protected L1 and L2 cache memories for
high reliability, running up to 1.6 GHz.
This patch is to add ls1088a SoC support in TF-A.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Id9ebcdad1beab07ea81a41955edd4f471d6cf090
Refine the code to be compatible with new CCN504 which is used
by ls2088a.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I2e2b3bbb9392862b04bf8a89dfb9575bf4be974a
Support CHASSIS 3.0(such as SoC LS1088A).
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I60843bc4d604f0de1d91c6d3ad5eb4921cdcc91a
Add base address definiton for Chassis 3 platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6041b93c9e9bb49af60743bd277ac7cc6f1b9da8
Set the receiver gain to max value to recover
cold temp marginality issue for phy-gen2
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: If639fa3ed404cf6e1b8abcc2b7137db1fdd0b2c2
Fix build issue of mmap_add_ddr_region_dynamically():
ls_bl2_el3_setup.c:(.text.bl2_plat_preload_setup+0x28): undefined
reference to mmap_add_ddr_region_dynamically
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I74a8b4c2337fc0646d6acb16ce61755c5efbdf38
Add a dummy platform token to RMMD and return it on request. The
platform token is requested with an SMC with the following parameters:
* Fid (0xC40001B3).
* Platform token PA (the platform token is copied at this address by
the monitor). The challenge object needs to be passed by
the caller in this buffer.
* Platform token len.
* Challenge object len.
When calling the SMC, the platform token buffer received by EL3 contains
the challenge object. It is not used on the FVP and is only printed to
the log.
Signed-off-by: Mate Toth-Pal <mate.toth-pal@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Change-Id: I8b2f1d54426c04e76d7a3baa6b0fbc40b0116348
* changes:
feat(stm32mp1): select platform compilation either by flag or DT
feat(stm32mp1-fdts): add support for STM32MP13 DK board
feat(stm32mp1-fdts): add DDR support for STM32MP13
feat(stm32mp1-fdts): add st-io_policies node for STM32MP13
feat(stm32mp1): updates for STM32MP13 device tree compilation
feat(stm32mp1-fdts): add DT files for STM32MP13
feat(dt-bindings): add TZC400 bindings for STM32MP13
feat(stm32mp1): add "Boot mode" management for STM32MP13
feat(stm32mp1): manage HSLV on STM32MP13
feat(stm32mp1): add sdmmc compatible in platform define
feat(st-sdmmc2): allow compatible to be defined in platform code
feat(stm32mp1): update IO compensation on STM32MP13
feat(stm32mp1): call pmic_voltages_init() in platform init
feat(st-pmic): add pmic_voltages_init() function
feat(stm32mp1): update CFG0 OTP for STM32MP13
feat(stm32mp1): usb descriptor update for STM32MP13
feat(st-clock): add clock driver for STM32MP13
feat(dt-bindings): add bindings for STM32MP13
feat(stm32mp1): get CPU info from SYSCFG on STM32MP13
feat(stm32mp1): use only one filter for TZC400 on STM32MP13
feat(stm32mp1): add a second fixed regulator
feat(stm32mp1): adaptations for STM32MP13 image header
feat(stm32mp1): update boot API for header v2.0
feat(stm32mp1): update IP addresses for STM32MP13
feat(stm32mp1): add part numbers for STM32MP13
feat(stm32mp1): chip rev. Z is 0x1001 on STM32MP13
feat(stm32mp1): update BACKUP_BOOT_MODE for STM32MP13
feat(stm32mp1): stm32mp_is_single_core() for STM32MP13
feat(stm32mp1): remove unsupported features on STM32MP13
feat(stm32mp1): update memory mapping for STM32MP13
feat(stm32mp1): introduce new flag for STM32MP13
feat(st): update stm32image tool for header v2
To choose either STM32MP13 or STM32MP15, one of the two flags can be
set to 1 in the make command line. Or the platform selection can be
done with device tree name, if it begins with stm32mp13 or stm32mp15.
Change-Id: I72f42665c105b71a84b4952ef3fcd6c06ae4598c
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add dedicated device tree files for STM32MP13.
Add new DDR compatible for STM32MP13x.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: Ib1bb9ad8cb2ab9f5f81549635d6604093aeb99d3
Add new APIs to enter and exit "boot mode".
In this mode a potential tamper won't block access or reset
the secure IPs needed while boot, without this mode a dead
lock may occurs.
Change-Id: Iad60d4a0420ec125b842a285f73a20eb54cd1828
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
On STM32MP13, the high speed mode for pads in low voltage is different
from STM32MP15. Each peripheral supporting the feature has its own
register.
Special care is taken for SDMMC peripherals. The HSLV mode is enabled
only if the max voltage for the pads is lower or equal to 1.8V.
Change-Id: Id94d2cca17dd4aca4d764230a643b2bb9a5f3342
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add DT_SDMMC2_COMPAT define in stm32mp1_def.h file in platform.
It allows the use of the compatible in platform code.
Change-Id: I535ad67dd133bab59cf81881adaef42d8e88632c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP13, two new SD1 and SD2 IO compensations cells are added,
for SDMMC1 and SDMMC2. They have to be managed the same way as the
main compensation cell.
Change-Id: Ib7aa648d65fc98e1613bfb46b0e7dd568fd21002
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The nominal voltage for VDDCPU when Cortex-A7 runs at 650MHz is 1.25V
on STM32MP13. VDDCORE should be set at 1.25V as well.
This is necessary, as the PMIC values in its NVMEM are 1.2V.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I3c24fe4cd68c7bf143cf9318ab38a15d6d41b5d2
This field is now declared on the 10 LSB bits on STM32MP13.
Several possible values are specified in the Reference Manual, and
indicate an open or closed device. Other values lead to a system panic.
Change-Id: I697124a21db66a56e7e223d601aa7cf44bb183c4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Update USB and DFU descriptor used for STM32MP13x
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I6e8111d279f49400a72baa12ff39f140d97e1c70
Add new clock driver for STM32MP13. Split the include file to manage
either STM32MP13 or STM32MP15.
Change-Id: Ia568cd12b1d5538809204f0fd2224d51e5d1e985
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
The IDC register from DBGMCU is duplicated in SYSCFG. As SYSCFG is
always accessible, get chip ID and revision ID from there on STM32MP13.
Change-Id: Ib0b6e8f68a2934a45ec0012f69db6c12a60adb17
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The ERXCTLR_EL1 register reads are RES0 for some error records
leading to a false assert on a read back.
This patch removes the assert on reading back the ERXCTLR_EL1
register to fix this issue.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I0cab30b12656a800ba87b8bb94b4c67a2331dee6
On STM32MP13, there is only 1 DDR port, hence only 1 TZC400 filter.
Change-Id: I4f6750022cdaf658cd209a4bf48a6cdb0717020e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Increase the fixed regulator number that needs to be
2 for STM32MP13.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: Ica990fe9a6494b76aed763d2d353f5234fed7cea
The header must now include by default at least an extra padding
header, increasing the size of the header to 512 bytes (0x200).
This header will be placed at the end of SRAM3 by BootROM, letting
the whole SYSRAM to TF-A.
The boot context is now placed in SRAM2, hence this memory has to be
mapped in BL2 MMU. This mapping is done for all SRAMs in a 2MB area.
Change-Id: I50fcd43ecd0ba2076292b057566efe6809b9971a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the new field for the new header v2.0.
Force MP13 platform to use v2.0.
Removing unused fields in boot_api_context_t for STM32MP13.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iac81aad9a939c1f305184e335e0a907ac69071df
Add the IP addresses that are STM32MP13 and update the ones for
which the base address has changed.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iea71a491da36f721bfd3fbfb010177e2a6a57281
Yann Gautier
Manish Pandey
Zelalem Aweke
Sandrine Bailleux
Manish V Badarkhe
Yann Gautier
David Vincze
Jiafei Pan
Soby Mathew
Patrick Delaunay
Biwen Li
Pankit Garg
Nicolas Le Bayon
Nicolas Toromanoff
Patrick Delaunay
Gabriel Fernandez
Varun Wadekar
Madhukar Pappireddy
Lionel Debieve
Lionel Debieve