Removing the "Upcoming" change log due to the change in change log
processing.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I6d2cc095dca3e654bd7e6fec2077c58bfbc48bb5
In the comment in the ARM FPGA DT we promise a generous 100 MB initrd,
but actually describe only a size of 20 MB.
As initrds are the most common and easy userland option for the boards,
let's increase the maximum size to the advertised 100 MB, to avoid
unpacking errors when an initrd exceeds the current limit of 20 MB.
Change-Id: If08ba3fabdad27b2c2aff93b18c3f664728b4348
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reverting FVP versions to previous version 11.12.38 for Cortex-A32x4
and Neoverse-N2x4.
Change-Id: I81e8ad24794dd425a9e9a66dc8bb02b42191abf1
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
This is the first release of the public Trusted
Firmware A class threat model. This release
provides the baseline for future updates to be
applied as required by developments to the
TF-A code base.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I3c9aadc46196837679f0b1377bec9ed4fc42ff11
Updated the list of supported FVP platforms as per the latest FVP
release.
Change-Id: I1abd0a7885b1133715062ee1b176733556a4820e
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
on i.MX8MP A1 silicon, the OCRAM space is extended to 512K + 64K,
currently, OCRAM @0x960000-0x980000 is reserved for BL31, it will
leave the last 64KB in non-continuous space. To provide a continuous
384KB + 64KB space for generic use, so move the BL31 space to
0x970000-0x990000 range.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I96d572fc0f87f05a60f55e0552a68b6e70f8e7f4
the 'always_on' member should be initialized from 'on'.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I5746ff40075b4fcda2ac7d04a8d7f1269af17e91
This allows the the Matterhorn ELP Arm core to operate at its
designated OPP.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I7ccef0cfd079d630c3cfe7874590bf42789a1dca
PSA wording is not longer associated with FF-A.
Change-Id: Id7c53b9c6c8f383543f6a32a15eb15b7749d8658
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
* changes:
stm32mp1: enable PIE for BL32
stm32mp1: set BL sizes regardless of flags
Add PIE support for AARCH32
Avoid the use of linker *_SIZE__ macros
Documented the build options used in Arm GPT parser enablement.
Change-Id: I9d7ef2f44b8f9d2731dd17c2639e5ed0eb6d0b3a
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added GPT parser support in BL2 for Arm platforms to get the entry
address and length of the FIP in the GPT image.
Also, increased BL2 maximum size for FVP platform to successfully
compile ROM-enabled build with this change.
Verified this change using a patch:
https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/9654
Change-Id: Ie8026db054966653b739a82d9ba106d283f534d0
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
NOTE: Breaking change to the way UUIDs are stored in the DT
Currently, UUIDs are stored in the device tree as
sequences of 4 integers. There is a mismatch in endianness
between the way UUIDs are represented in memory and the way
they are parsed from the device tree. As a result, we must either
store the UUIDs in little-endian format in the DT (which means
that they do not match up with their string representations)
or perform endianness conversion after parsing them.
Currently, TF-A chooses the second option, with unwieldy
endianness-conversion taking place after reading a UUID.
To fix this problem, and to make it convenient to copy and
paste UUIDs from other tools, change to store UUIDs in string
format, using a new wrapper function to parse them from the
device tree.
Change-Id: I38bd63c907be14e412f03ef0aab9dcabfba0eaa0
Signed-off-by: David Horstmann <david.horstmann@arm.com>
TF-A does not have the capability to read UUIDs in string form
from the device tree. This capability is useful for readability,
so add a wrapper function, fdtw_read_uuid() to parse UUIDs from
the DT.
This function should parse a string of the form:
"aabbccdd-eeff-4099-8877-665544332211"
to the byte sequence in memory:
[aa bb cc dd ee ff 40 99 88 77 66 55 44 33 22 11]
Change-Id: I99a92fbeb40f4f4713f3458b36cb3863354d2bdf
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Replaced PLAT_ARM_FIP_BASE and PLAT_ARM_FIP_MAX_SIZE macro with a
generic name PLAT_ARM_FLASH_IMAGE_BASE and PLAT_ARM_FLASH_IMAGE_MAX_SIZE
so that these macros can be reused in the subsequent GPT based support
changes.
Change-Id: I88fdbd53e1966578af4f1e8e9d5fef42c27b1173
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
* changes:
fdts: stm32mp1: add support for the Seeed Odyssey SoM and board
fdts: stm32mp1: add alternative SDMMC2 pins to the pinctrl
fdts: stm32mp1: add I2C2 pins in the pinctrl
fdts: stm32mp1: add the I2C2 peripheral in the SoC DTS
This new compile option is only for Armada 3720 Development Board. When
it is set to 1 then TF-A will setup PM wake up src configuration.
By default this new option is disabled as it is board specific and no
other A37xx board has PM wake up src configuration.
Currently neither upstream U-Boot nor upstream Linux kernel has wakeup
support for A37xx platforms, so having it disabled does not cause any
issue.
Prior this commit PM wake up src configuration specific for Armada 3720
Development Board was enabled for every A37xx board. After this change it
is enabled only when compiling with build flag A3720_DB_PM_WAKEUP_SRC=1
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I09fea1172c532df639acb3bb009cfde32d3c5766
The `signed-off-by` rule does not correctly detect the `Signed-off-by:`
trailer if it's not the last trailer. Therefore, this rule has been
disabled until we can resolve this in the commitlint upstream.
Change-Id: I50ea29067528f3c1c25beeea5eb25134b25b2af2
Signed-off-by: Chris Kay <chris.kay@arm.com>
Platform NV counter get updated (if cert NV counter > plat NV counter)
before authenticating the certificate if the platform specifies NV
counter method before signature authentication in its CoT, and this
provides an opportunity for a tempered certificate to upgrade the
platform NV counter. This is theoretical issue, as in practice none
of the standard CoT (TBBR, dualroot) or upstream platforms ones (NXP)
exercised this issue.
To fix this issue, modified the auth_nvctr method to do only NV
counter check, and flags if the NV counter upgrade is needed or not.
Then ensured that the platform NV counter gets upgraded with the NV
counter value from the certificate only after that certificate gets
authenticated.
This change is verified manually by modifying the CoT that specifies
certificate with:
1. NV counter authentication before signature authentication
method
2. NV counter authentication method only
Change-Id: I1ad17f1a911fb1035a1a60976cc26b2965b05166
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch fixes static checks errors reported for missing copyright in
`include/dt-bindings/interrupt-controller/arm-gic.h` and the include
order of header files in `.dts` and `.dtsi` files.
Change-Id: I2baaf2719fd2c84cbcc08a8f0c4440a17a9f24f6
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Chris Kay <chris.kay@arm.com>
Add board support for RD-N2 Cfg1 variant of RD-N2 platform. It is a
variant of RD-N2 platform with a reduced interconnect mesh size (3x3)
and core count (8-cores). Its platform variant id is 1.
Change-Id: I34ad35c5a5c1e9b69a658fb92ed00e5bc5fe72f3
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
A Neoverse reference design platform can have two or more variants that
differ in core count, cluster count or other peripherals. To allow reuse
of platform code across all the variants of a platform, introduce build
option CSS_SGI_PLATFORM_VARIANT for Arm Neoverse reference design
platforms. The range of allowed values for the build option is platform
specific. The recommended range is an interval of non negative integers.
An example usage of the build option is
make PLAT=rdn2 CSS_SGI_PLATFORM_VARIANT=1
Change-Id: Iaae79c0b4d0dc700521bf6e9b4979339eafe0359
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
This will help in keeping source file generic and conditional
compilation can be contained in platform provided dt files.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I3c6e0a429073f0afb412b9ba521ce43f880b57fe
Mark Dykes
laurenw-arm
Andre Przywara
bipin.ravi
Zelalem
Manish Pandey
Jacky Bai
Olivier Deprez
Usama Arif
Yann Gautier
Manish V Badarkhe
Madhukar Pappireddy
David Horstmann
Pali Rohár
Chris Kay
Alexei Fedorov
Aditya Angadi