So far the H616 was the only Allwinner SoC needed to amend the DTB, to
reserve the DRAM portion that BL31 occupies.
To allow other SoCs to modify the DTB as well, without duplicating code,
move the DTB change routines into Allwinner common code, and generalise
the current code to allow other modifications.
No functional change intended.
Change-Id: I080ea07b6470367f3c2573a4368f8ef5196d411c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
When the BL31 for the Allwinner H616 runs in DRAM, we need to make sure
we tell the non-secure world about the memory region it uses.
Add a reserved-memory node to the DT, which covers the area that BL31
could occupy. The "no-map" property will prevent OSes from mapping
the area, so there would be no speculative accesses.
Change-Id: I808f3e1a8089da53bbe4fc6435a808e9159831e1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Now that we have split the native and the SCPI version of the PSCI ops,
we can introduce build options to compile in either or both of them.
If one version is not compiled in, some stub functions make sure the
common code still compiles and makes the right decisions.
By default both version are enabled (as before), but one of them can be
disabled on the make command line, or via a platform specific Makefile.
Change-Id: I0c019d8700c0208365eacf57809fb8bc608eb9c0
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
In order to keep SCP firmware as optional, the original, limited native
PSCI implementation was kept around as a fallback. This turned out to be
a good decision, as some newer SoCs omit the ARISC, and thus cannot run
SCP firmware.
However, keeping the two implementations in one file makes things
unnecessarily messy. First, it is difficult to compile out the
SCPI-based implementation where it is not applicable. Second the check
is done in each callback, while scpi_available is only updated at boot.
This makes the individual callbacks unnecessarily complicated.
It is cleaner to provide two entirely separate implementations in two
separate files. The native implementation does not support any kind of
CPU suspend, so its callbacks are greatly simplified. One function,
sunxi_validate_ns_entrypoint, is shared between the two implementations.
Finally, the logic for choosing between implementations is kept in a
third file, to provide for platforms where only one implementation is
applicable and the other is compiled out.
Change-Id: I4914f07d8e693dbce218e0e2394bef15c42945f8
Signed-off-by: Samuel Holland <samuel@sholland.org>
Currently, sunxi_cpu_off() has two separate code paths: one for the
local CPU, and one for other CPUs. Let's split them in to two functions.
This actually simplifies things, because all callers either operate on
the local CPU only (sunxi_pwr_down_wfi()) or other CPUs only
(sunxi_cpu_power_off_others()). This avoids needing a second MPIDR read
to choose the appropriate code path.
Change-Id: I55de85025235cc95466bfa106831fc4c2368f527
Signed-off-by: Samuel Holland <samuel@sholland.org>
The action of last resort isn't going to change between SoCs. This moves
that code back to the PSCI implementation, where it more obviously
matches the code in sunxi_system_reset().
The two error messages say essentially the same thing anyway.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I62ac35fdb5ed78a016e9b18281416f1dcea38a4a
The current range check for the offset is wrong: it is counting bytes,
while indexing an array of uint32_t. Since the offset is always zero,
the parameter is unnecessary. Instead of adding more code to fix the
check, remove the parameter to avoid the problem entirely.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Iadfc7d027155adc754e017b3462233ce9a1d64f6
Convert them to take an mpidr instead of a (cluster, core) pair. This
simplifies all of the call sites, and actually makes the functions a bit
smaller.
Signed-off-by: Samuel Holland <samuel@sholland.org>
The more recent Allwinner SoCs contain an OpenRISC management
controller (called arisc or CPUS), which shares the bus with the ARM cores,
but runs on a separate power domain. This is meant to handle power
management with the ARM cores off.
There are efforts to run sophisticated firmware on that core
(communicating via SCPI with the ARM world), but for now can use it for
the rather simple task of helping to turn the ARM cores off. As this
cannot be done by ARM code itself (because execution stops at the
first of the three required steps), we can offload some instructions to
this management processor.
This introduces a helper function to hand over a bunch of instructions
and triggers execution. We introduce a bakery lock to avoid two cores
trying to use that (single) arisc core. The arisc code is expected to
put itself into reset after is has finished execution.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
For Allwinner boards we now use some heuritistics to find a preloaded
.dtb file.
Pass this address on to the PMIC setup routine, so that it can use the
information contained therein to setup some initial power rails.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In the H6 platform code there is a routine to do the platform
initialisation of the R_I2C controller. We will need a very similar
setup routine to initialise the RSB controller on the A64.
Move this code to sunxi_common.c and generalise it to support all SoCs
and also to cover the related RSB bus.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Many boards without a dedicated PMIC contain simple regulators, which
can be controlled via GPIO pins.
To later allow turning them off easily, introduce a simple function to
configure a given pin as a GPIO out pin and set it to the desired level.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
So far we have a sunxi_private.h header file in the common code directory.
This holds the prototypes of various functions we share in *common*
code. However we will need some of those in the platform specific code
parts as well, and want to introduce new functions shared across the
whole platform port.
So move the sunxi_private.h file into the common/include directory, so
that it becomes visible to all parts of the platform code.
Fix up the existing #includes and add missing ones, also add the
sunxi_read_soc_id() prototype here.
This will be used in follow up patches.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara
Samuel Holland