The previous format was not very practical and hard to parse by
scripts. The current format is easier as it uses more tokens that can be
identified by scripts, while maintaining a reasonably good result when
it is rendered.
Some maintainers maintain more than one subsystem but they were all
part of the same entry. In cases like this the entry has been split
into two to clarify what file belongs to which subsystem.
The list of maintainers of the Trusted Firmware has been updated.
Change-Id: I4be2d527c5171e8d2d86fb49e45e1d9dbcbd2d80
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Previously, data caches were disabled while enabling MMU only because of
active stack. Now that we can enable MMU without using stack, we can
enable both MMU and data caches at the same time.
Change-Id: I73f3b8bae5178610e17e9ad06f81f8f6f97734a6
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Having an active stack while enabling MMU has shown coherency problems.
This patch builds on top of translation library changes that introduces
MMU-enabling without using stacks.
Previously, with HW_ASSISTED_COHERENCY, data caches were disabled while
enabling MMU only because of active stack. Now that we can enable MMU
without using stack, we can enable both MMU and data caches at the same
time.
NOTE: Since this feature depends on using translation table library v2,
disallow using translation table library v1 with HW_ASSISTED_COHERENCY.
FixesARM-software/tf-issues#566
Change-Id: Ie55aba0c23ee9c5109eb3454cb8fa45d74f8bbb2
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
An earlier patch split MMU-enabling function for translation library v2.
Although we don't intend to introduce the exact same functionality for
xlat v1, this patch introduces stubs for directly enabling MMU to
maintain API-compatibility.
Change-Id: Id7d56e124c80af71de999fcda10f1734b50bca97
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
At present, the function provided by the translation library to enable
MMU constructs appropriate values for translation library, and programs
them to the right registers. The construction of initial values,
however, is only required once as both the primary and secondaries
program the same values.
Additionally, the MMU-enabling function is written in C, which means
there's an active stack at the time of enabling MMU. On some systems,
like Arm DynamIQ, having active stack while enabling MMU during warm
boot might lead to coherency problems.
This patch addresses both the above problems by:
- Splitting the MMU-enabling function into two: one that sets up
values to be programmed into the registers, and another one that
takes the pre-computed values and writes to the appropriate
registers. With this, the primary effectively calls both functions
to have the MMU enabled, but secondaries only need to call the
latter.
- Rewriting the function that enables MMU in assembly so that it
doesn't use stack.
This patch fixes a bunch of MISRA issues on the way.
Change-Id: I0faca97263a970ffe765f0e731a1417e43fbfc45
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The meaning of them wasn't clear in the header file, it was needed to
search the code for the places where they are used.
Add parentheses to macros in the same header.
Change-Id: I700bc0fd75ccfc0a34f439cb3b2692861bb73b9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Currenly the CNTFRQ register and system timer is initialized in BL31 for
use by the normal world. During firmware update, the NS-BL1 or NS-BL2U
may need to access the system timer. Hence this patch duplicates the
CNTFRQ and system timer initialization in BL1 as well.
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I1ede78b4ae64080fb418cb93f3e48b26d7b724dc
Set the ability to dynamically disable Trusted Boot Board
authentication to be off by default
Change-Id: Ibd2aa179179f7d9b0e7731c6e450f200a8c67529
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
In the case of the platform max power level being less than the system
power level, make sure to not overrun the array of power states.
This fixes Coverity Scan OVERRUN defect CID 267021.
Change-Id: I52646ab9be2fceeb5c331b5dad7a6267991f4197
Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>
This is to fix a number of Coverity Scan DEADCODE defects, CID numbers
listed below, as reported from
https://scan.coverity.com/projects/arm-software-arm-trusted-firmware
CID 267023
CID 267022
CID 267020
Change-Id: I2963a799b210149e84ccab5c5b9082267ddfe337
Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>
Socionext has multiple product lines. The UniPhier is not the only
platform any more. Correct the maintainership.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In the porting guide, there are blue boxes that describe the argument
types and the return type of each function. A small typo caused some of
these boxes not being properly rendered.
In the user guide, small typos were fixed that caused random text being
unintentionally rendered as bold. Also, a slight rewording was done in
the section describing the DYN_DISABLE_AUTH flag.
Change-Id: I57303ca609436a82162fa9b42c06b0d5a63da6df
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
The function end_sdei_explicit_dispatch() was intended to be
end_sdei_synchronous_dispatch() which does the opposite of
begin_sdei_synchronous_dispatch(). This patch fixes that.
No functional changes.
Change-Id: I141bd91eb342ecf4ddfd05b49513eee4549e7a56
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
commit 2ccfcb2ea5 ("SDEI: Determine client
EL from NS context's SCR_EL3") intended to read from SCR_EL3, but
wrongly read from SPSR_EL3 instead. This patch fixes that.
Change-Id: I8ffea39cc98ef59cb8e7a4c6ef4cb12011c58536
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The Commit cdb6ac94ec introduced a bug
because of which the SDEI dispatcher wrongly panic when an SDEI event
dispatched earlier as a result of interrupt. This patch fixes the check
for a bound interrupt.
Change-Id: If55c8f0422ff781731248bbbc9c1b59fa0d3c4b0
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The values defined in this type are used in logical operations, which
goes against MISRA Rule 10.1: "Operands shall not be of an inappropriate
essential type".
Now, `unsigned int` is used instead. This also allows us to move the
dynamic mapping bit from 30 to 31. It was an undefined behaviour in the
past because an enum is signed by default, and bit 31 corresponds to the
sign bit. It is undefined behaviour to modify the sign bit. Now, bit 31
is free to use as it was originally meant to be.
mmap_attr_t is now defined as an `unsigned int` for backwards
compatibility.
Change-Id: I6b31218c14b9c7fdabebe432de7fae6e90a97f34
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The file arm_ras.c intended to provide common platform-specific RAS
configuration for Arm platforms. Because this file has symbol
definitions, it's proving difficult to provide a common definition.
This patch therefore renames and makes the file specific to FVP. Other
platforms shall provide their own configuration in similar fashion.
Change-Id: I766fd238946e3e49cdb659680e1b45f41b237901
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
SDEI event dispatches currently only sets up the Non-secure context
before returning to the caller. The actual dispatch only happens upon
exiting EL3 next time.
However, for various error handling scenarios, it's beneficial to have
the dispatch happen synchronously. I.e. when receiving SDEI interrupt,
or for a successful sdei_dispatch_event() call, the event handler is
executed; and upon the event completion, dispatcher execution resumes
after the point of dispatch. The jump primitives introduced in the
earlier patch facilitates this feature.
With this patch:
- SDEI interrupts and calls to sdei_dispatch_event prepares the NS
context for event dispatch, then sets a jump point, and immediately
exits EL3. This results in the client handler executing in
Non-secure.
- When the SDEI client completes the dispatched event, the SDEI
dispatcher does a longjmp to the jump pointer created earlier. For
the caller of the sdei_dispatch_event() in particular, this would
appear as if call returned successfully.
The dynamic workaround for CVE_2018_3639 is slightly shifted around as
part of related minor refactoring. It doesn't affect the workaround
functionality.
Documentation updated.
NOTE: This breaks the semantics of the explicit dispatch API, and any
exiting usages should be carefully reviewed.
Change-Id: Ib9c876d27ea2af7fb22de49832e55a0da83da3f9
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch introduces setjmp() and ongjmp() primitives to enable
standard setjmp/longjmp style execution. Both APIs parameters take a
pointer to struct jmpbuf type, which hosts CPU registers saved/restored
during jump.
As per the standard usage:
- setjmp() return 0 when a jump is setup; and a non-zero value when
returning from jump.
- The caller of setjmp() must not return, or otherwise update stack
pointer since.
Change-Id: I4af1d32e490cfa547979631b762b4cba188d0551
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Currently, the dispatcher reads from SCR_EL3 register directly to
determine the EL of SDEI client. This is with the assumption that
SCR_EL3 is not modified throughout. However, with RAS work flows, it's
possible that SCR_EL3 register contains values corresponding to Secure
world, and therefore EL determination can go wrong. To mitigate this,
always read the register from the saved Non-secure context.
Change-Id: Ic85e4021deb18eb58757f676f9a001174998543a
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The current macros only allow to define dynamic and statically-bound
SDEI events. However, there ought be a mechanism to define SDEI events
that are explicitly dispatched; i.e., events that are dispatched as a
result of a previous secure interrupt or other exception
This patch introduces SDEI_EXPLICIT_EVENT() macro to define an explicit
event. They must be placed under private mappings. Only the priority
flags are allowed to be additionally specified.
Documentation updated.
Change-Id: I2e12f5571381195d6234c9dfbd5904608ad41db3
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The XN, PXN and UXN bits are part of the upper attributes, not the
lower attributes.
Change-Id: Ia5e83f06f2a8de88b551f55f1d36d694918ccbc0
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Add Makefile and plaform definations file.
My thanks to Daniel Thompson and Ard Biesheuvel for the bits and pieces
I've taken from their earlier work regarding build and deploy steps for
Developerbox based on Synquacer SoCs. They deserve much of the credit
for this work although, since I assembled and tested things, any blame
is probably mine.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PSCI framework uses SCPI driver to communicate to SCP firmware for
various power management operations. Following PSCI operations are
supported:
- CPU ON
- CPU OFF
- CPU STANDBY
- SYSTEM RESET
- SYSTEM OFF
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Retrieve DRAM info from SCP firmware using SCPI driver. Board supports
multiple DRAM slots so its required to fetch DRAM info from SCP firmware
and pass this info to UEFI via non-secure SRAM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Add System Control and Power Interface (SCPI) driver which provides APIs
for PSCI framework to work. SCPI driver uses MHU driver APIs to communicate
with SCP firmware for various system control and power operations.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Add Message Handling Unit (MHU) driver used to communicate among
Application Processors (AP) and System Control Processor (SCP).
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Konstantin Porotchkin
Dimitris Papastamos
Antonio Nino Diaz
Jeenu Viswambharan
Soby Mathew
Daniel Boulby
Nariman Poushin
Masahiro Yamada
John Tsichritzis
Sumit Garg
Ard Biesheuvel