TPIDR_EL2 is missing from the EL2 state register save/restore
sequence. This patch adds it to the context save restore routines.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I35fc5ee82f97b72bcedac57c791312e7b3a45251
* changes:
rpi: docs: Update maintainers file to new RPi directory scheme
rpi: console: Autodetect Mini-UART vs. PL011 configuration
rpi3: build: Include GPIO driver in all BL stages
rpi: Allow using PL011 UART for RPi3/RPi4
rpi3: console: Use same "clock-less" setup scheme as RPi4
rpi3: gpio: Simplify GPIO setup
Rather than creating entry in plat_arm_mmap array to map the
entire DRAM region in BL31/SP_MIN, only map a smaller region holding
HW_CONFIG DTB. Consequently, an increase in number of sub-translation
tables(level-2 and level-3) i.e., MAX_XLAT_TABLES is necessary to map
the new region in memory.
In order to accommodate the increased code size in BL31 i.e.,
PROGBITS, the max size of BL31 image is increased by 0x1000(4K).
Change-Id: I540b8ee550588e22a3a9fb218183d2ab8061c851
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
With the addition of the Raspberry Pi 4 port the directory structure
changed a bit, also the new port didn't have a separate entry.
Add a new entry for the RPi4 port and adjust the path names.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I04b60e729a19bb0cc3dd6ce6899ec6480356b1f1
The Raspberry Pi has two different UART devices pin-muxed to GPIO 14&15:
One ARM PL011 one and the 8250 compatible "Mini-UART".
A dtoverlay parameter in config.txt will tell the firmware to switch
between the two: it will setup the right clocks and will configure the
pinmuxes accordingly.
To autodetect the user's choice, we read the pinmux register and check
its setting: ALT5 (0x2) means the Mini-UART is used, ALT0 (0x4) points
to the PL011.
Based on that we select the UART driver to initialise.
This will allow console output in any case.
Change-Id: I620d3ce68de6c6576599f2a405636020e1fd1376
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
So far the Raspberry Pi 3 build needs the GPIO driver just for BL2.
Upcoming changes will require some GPIO code in BL1 and BL31 also, so
move those driver files into the common source section.
This does not affect BL31 code size at all, and bl1.bin just increases
by 144 bytes, but doesn't affect the padded binary size at all.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I7639746dc241c1e69099d85d2671c65fa0108555
The Broadcom 283x SoCs feature multiple UARTs: the mostly used
"Mini-UART", which is an 8250 compatible IP, and at least one PL011.
While the 8250 is usually used for serial console purposes, it suffers
from a design flaw, where its clock depends on the VPU clock, which can
change at runtime. This will reliably mess up the baud rate.
To avoid this problem, people might choose to use the PL011 UART for
the serial console, which is pin-mux'ed to the very same GPIO pins.
This can be done by adding "miniuart-bt" to the "dtoverlay=" line in
config.txt.
To prepare for this situation, use the newly gained freedom of sharing
one console_t pointer across different UART drivers, to introduce the
option of choosing the PL011 for the console.
This is for now hard-coded to choose the Mini-UART by default.
A follow-up patch will introduce automatic detection.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I8cf2522151e09ff4ff94a6d396aec6fc4b091a05
In the wake of the upcoming unification of the console setup code
between RPi3 and RPi4, extend the "clock-less" setup scheme to the
RPi3. This avoid programming any clocks or baud rate registers,
which makes the port more robust against GPU firmware changes.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ida83a963bb18a878997e9cbd55f8ceac6a2e1c1f
There is really no reason to use and pass around a struct when its only
member is the (fixed) base address.
Remove the struct and just use the base address on its own inside the
GPIO driver. Then set the base address automatically.
This simplifies GPIO setup for users, which now don't need to deal with
zeroing a struct and setting the base address anymore.
Change-Id: I3060f7859e3f8ef9a24cc8fb38307b5da943f127
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Implemented SMCCC_ARCH_SOC_ID call in order to get below
SOC information:
1. SOC revision
2. SOC version
Implementation done using below SMCCC specification document:
https://developer.arm.com/docs/den0028/c
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ie0595f1c345a6429a6fb4a7f05534a0ca9c9a48b
This patch introduces the `SPCI_ID_GET` interface which will return the
ID of the calling SPCI component. Returns 0 for requests from the
non-secure world and the SPCI component ID as specified in the manifest
for secure world requests.
Change-Id: Icf81eb1d0e1d7d5c521571e04972b6e2d356e0d1
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Since commit 3bff910dc1 ("Introduce COT
build option"), it is now possible to select a different Chain of Trust
than the TBBR-Client one.
Make a few adjustments in the documentation to reflect that. Also make
some minor improvements (fixing typos, better formatting, ...) along
the way.
Change-Id: I3bbadc441557e1e13311b6fd053fdab6b10b1ba2
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
The TBBR documentation has been written along with an early
implementation of the code. At that time, the range of supported
encryption and hash algorithms was failry limited. Since then, support
for other algorithms has been added in TF-A but the documentation has
not been updated.
Instead of listing them all, which would clutter this document while
still leaving it at risk of going stale in the future, remove specific
references to the original algorithms and point the reader at the
relevant comprehensive document for further details.
Change-Id: I29dc50bc1d53b728091a1fbaa1c3970fb999f7d5
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
To accommodate the increasing size of the SCP_BL2 binary, the base
address of the memory region allocated to SCP_BL2 has been moved
downwards from its current (mostly) arbitrary address to the beginning
of the non-shared trusted SRAM.
Change-Id: I086a3765bf3ea88f45525223d765dc0dbad6b434
Signed-off-by: Chris Kay <chris.kay@arm.com>
Add CLCD, HDLCD, PCI and VIRTIO devices as source interfaces for TZC
filter unit to enable DMA for these devices.
Change-Id: Ifad2e56b18605311936e03cfcccda573cac7e60a
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
* changes:
Tegra210: Remove "unsupported func ID" error msg
Tegra210: support for secure physical timer
spd: tlkd: secure timer interrupt handler
Tegra: smmu: export handlers to read/write SMMU registers
Tegra: smmu: remove context save sequence
Tegra: bpmp: fixup TEGRA_CLK_SE values for Tegra186/Tegra194
Tegra194: memctrl: lock some more MC SID security configs
Tegra194: add SE support to generate SHA256 of TZRAM
Tegra194: store TZDRAM base/size to scratch registers
Tegra194: fix warnings for extra parentheses
The motivation behind this patch and following patches is to extract
information about the platform in runtime rather than depending on
compile time macros such as FVP_CLUSTER_COUNT. This partially enables
us to use a single binary for a family of platforms which all have
similar hardware capabilities but differ in configurations.
we populate the data structure describing the power domain hierarchy
of the platform dynamically by querying the number of clusters and cpus
using fconf getter APIs. Compile time macro such as FVP_CLUSTER_COUNT
is still needed as it determines the size of related data structures.
Note that the cpu-map node in HW_CONFIG dts represents a logical
hierarchy of power domains of CPU. However, in reality, the power
domains may not have been physically built in such hierarchy.
Change-Id: Ibcbb5ca7b2c969f8ad03ab2eab289725245af7a9
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
The platform sip is reporting a "unsupported function ID" if the
smc function id is not pmc command. When actually the smc function id
could be specific to the tegra sip handler.
This patch removes the error reported.
Change-Id: Ia3c8545d345746c5eea6d75b9e6957ca23ae9ca3
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
This patch adds an interrupt handler for TLK. On receiving an
interrupt, the source of the interrupt is determined and the
interrupt is marked complete. The IRQ number is passed to
TLK along with a special SMC function ID. TLK issues an SMC
to notify completion of the interrupt handler in the S-EL1
world.
Change-Id: I76f28cee6537245c5e448d2078f86312219cea1a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
SMMU and MC registers are saved as part of the System Suspend sequence.
The register list includes some NS world SMMU registers that need to be
saved by NS world software instead. All that remains as a result are
the MC registers.
This patch moves code to MC file as a result and renames all the
variables and defines to use the MC prefix instead of SMMU. The
Tegra186 and Tegra194 platform ports are updated to provide the MC
context register list to the parent driver. The memory required for
context save is reduced due to removal of the SMMU registers.
Change-Id: I83a05079039f52f9ce91c938ada6cd6dfd9c843f
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
This patch fixes the SE clock ID being used for Tegra186 and Tegra194
SoCs. Previous assumption, that both SoCs use the same clock ID, was
incorrect.
Change-Id: I1ef0da5547ff2e14151b53968cad9cc78fee63bd
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The platform code already contains the initial set of MC SID
security configs to be locked during boot. This patch adds some
more configs to the list. Since the reset value of these registers
is already as per expectations, there is no need to change it.
MC SID security configs
- PTCR,
- MIU6R, MIU6W, MIU7R, MIU7W,
- MPCORER, MPCOREW,
- NVDEC1SRD, NVDEC1SRD1, NVDEC1SWR.
Change-Id: Ia9a1f6a6b6d34fb2787298651f7a4792a40b88ab
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
The BL3-1 firmware code is stored in TZSRAM on Tegra194 platforms. This
memory loses power when we enter System Suspend and so its contents are
stored to TZDRAM, before entry. This opens up an attack vector where the
TZDRAM contents might be tampered with when we are in the System Suspend
mode. To mitigate this attack the SE engine calculates the hash of entire
TZSRAM and stores it in PMC scratch, before we copy data to TZDRAM. The
WB0 code will validate the TZDRAM and match the hash with the one in PMC
scratch.
This patch adds driver for the SE engine, with APIs to calculate the hash
and store to PMC scratch registers.
Change-Id: I04cc0eb7f54c69d64b6c34fc2ff62e4cfbdd43b2
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>
This patch saves the TZDRAM base and size values to secure scratch
registers, for the WB0. The WB0 reads these values and uses them to
verify integrity of the TZDRAM aperture.
Change-Id: I2f5fd11c87804d20e2698de33be977991c9f6f33
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>
armclang displays warnings for extra parentheses, leading to
build failures as warnings are treated as errors.
This patch removes the extra parentheses to fix this issue.
Change-Id: Id2fd6a3086590436eecabc55502f40752a018131
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
Create, register( and implicitly invoke) fconf_populate_topology()
function which extracts the topology related properties from dtb into
the newly created fconf based configuration structure 'soc_topology'.
Appropriate libfdt APIs are added to jmptbl.i file for use with USE_ROMLIB
build feature.
A new property which describes the power domain levels is added to the
HW_CONFIG device tree source files.
This patch also fixes a minor bug in the common device tree file
fvp-base-gicv3-psci-dynamiq-common.dtsi
As this file includes fvp-base-gicv3-psci-common.dtsi, it is necessary
to delete all previous cluster node definitons because DynamIQ based
models have upto 8 CPUs in each cluster. If not deleted, the final dts
would have an inaccurate description of SoC topology, i.e., cluster0
with 8 or more core nodes and cluster1 with 4 core nodes.
Change-Id: I9eb406da3ba4732008a66c01afec7c9fa8ef59bf
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Necessary infrastructure added to integrate fconf framework in BL31 & SP_MIN.
Created few populator() functions which parse HW_CONFIG device tree
and registered them with fconf framework. Many of the changes are
only applicable for fvp platform.
This patch:
1. Adds necessary symbols and sections in BL31, SP_MIN linker script
2. Adds necessary memory map entry for translation in BL31, SP_MIN
3. Creates an abstraction layer for hardware configuration based on
fconf framework
4. Adds necessary changes to build flow (makefiles)
5. Minimal callback to read hw_config dtb for capturing properties
related to GIC(interrupt-controller node)
6. updates the fconf documentation
Change-Id: Ib6292071f674ef093962b9e8ba0d322b7bf919af
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
A populate() function essentially captures the value of a property,
defined by a platform, into a fconf related c structure. Such a
callback is usually platform specific and is associated to a specific
configuration source.
For example, a populate() function which captures the hardware topology
of the platform can only parse HW_CONFIG DTB. Hence each populator
function must be registered with a specific 'config_type' identifier.
It broadly represents a logical grouping of configuration properties
which is usually a device tree source file.
Example:
> TB_FW: properties related to trusted firmware such as IO policies,
base address of other DTBs, mbedtls heap info etc.
> HW_CONFIG: properties related to hardware configuration of the SoC
such as topology, GIC controller, PSCI hooks, CPU ID etc.
This patch modifies FCONF_REGISTER_POPULATOR macro and fconf_populate()
to register and invoke the appropriate callbacks selectively based on
configuration type.
Change-Id: I6f63b1fd7a8729c6c9137d5b63270af1857bb44a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Olivier Deprez
Sandrine Bailleux
Manish Pandey
Madhukar Pappireddy
Andre Przywara
Manish V Badarkhe
Mark Dykes
Max Shvetsov
Chris Kay
Soby Mathew
Aditya Angadi
Kalyani Chidambaram
Varun Wadekar
Pritesh Raithatha
Jeetesh Burman
György Szing
Balint Dobszay
Louis Mayencourt