When using more than a single service in PMF, it is necessary that the
per-service timestamps begin on a cache line boundary. Previously it
was possible that two services shared a cache line for their
timestamps. This made it difficult to reason about cache maintenance
operations within a single service and required a global understanding
of how all services operate.
Change-Id: Iacaae5154a7e19ad4107468e56df9ad082ee371c
We must guarantee that writes have become effective before returning to
the caller. Hence, wait for PMUFW signaling completion of the FW call
before returning to the rich OS.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Add support to provide silicon id to non-secure
software through SMC.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
[ sb
Move zynqmp_get_silicon_id outside of compile guards to avoid build
errors.
]
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
This patch adds pm_fpga_load() and pm_fpga_get_status() API's to provide
the Access to the xilfpga library to load the bitstream into zynqmp
PL region.
Signed-off-by: Nava kishore Manne <navam@xilinx.com>
During system suspend, identify slaves which are configured
as wake sources and call pm_set_wakeup_source API for each of them.
Identifying if device may wake the system is done by checking if any
interrupt of that device is enabled in GICD_ISENABLER when the APU is
about to enter SUSPEND_TO_RAM state. If such interrupt is found,
pm_set_wakeup_source is called with corresponding PM node ID as
argument.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
The state argument of the pm_self_suspend API encodes the state to
which the APU intends to suspend. The state can be:
- PM_APU_STATE_CPU_IDLE - processor power down, all memories remain
on
- PM_APU_STATE_SUSPEND_TO_RAM - all processors powered down, L2$
powered down, all OCM banks in retention and DDR in
self-refresh.
The calls for setting requirements for L2$ and OCM banks are now
redundant and removed.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
[ sb
- remove redundant #defines
]
Signed-off-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Implementation is based on arm_validate_power_state().
This function is called during CPU_SUSPEND PSCI call to validate
power_state parameter. If state is valid this function populate it
in req_state array as power domain level specific local state.
ATF platform migration guide chapter 2.2 defines this function as
mandatory for PSCIv1.0 CPU_SUSPEND support.
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
When moving the ATF into the DRAM address space an additional
translation table is required.
Reported-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
The OCM space was reorganized to use the space more efficiently. Adjust
the default ATF location to be aligned with other ZynqMP software
components.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Arm provided error injection support. To enable this error injection,
we need to set L2DEIEN in L2ACTLR_EL1 register and L1DEIEN in
CPUACTLR_EL1 register.
This is needed for our cortexa53 edac linux driver testing.
These registers need write access from non secure EL1 i.e linux
at the time of setting the above bits.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
ZynqMP only supports builds with RESET_TO_BL31=1. Set this option
through the platform makefile on default.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Currently the GICv3 driver mandates that platform populate
both G1S and G0 interrupts. However, it is possible that a
given platform is not interested in both the groups and
just needs to specify either one of them.
This patch modifies the `gicv3_rdistif_init()` & `gicv3_distif_init()`
functions to allow either G1S or G0 interrupts to be configured.
FixesARM-software/tf-issues#400
Change-Id: I43572b0e08ae30bed5af9334f25d35bf439b0d2b
This feature allows one to quickly verify that the expected
image is contained in the FIP without extracting the image and
running sha256sum(1) on it.
The sha256 digest is only shown when the verbose flag is used.
This change requires libssl-dev to be installed in order to build
Trusted Firmware. Previously, libssl-dev was optionally needed only
to support Trusted Board Boot configurations.
FixesARM-Software/tf-issues#124
Change-Id: Ifb1408d17f483d482bb270a589ee74add25ec5a6
As the checkpatch reports the warning or error.
plat/rockchip/common/plat_pm.c:96:
ERROR: do not set execute permissions for source files
plat/rockchip/rk3399/drivers/pmu/pmu.c:294:
ERROR: do not set execute permissions for source files
plat/rockchip/common/plat_pm.c:286: WARNING: line over 80 characters
plat/rockchip/common/plat_pm.c:287: WARNING: line over 80 characters
Change-Id: Ib347da21c56551c31df3f90f03777b13c75d5c26
for compatible 32bit and 64bit, we use 0x82xxxxxx as function ID,
we modify SIP call function return value to 32 bit.
Change-Id: Ib99b03a9ea423853aaa296dcc634ee82c622a552
For save power cosumption, if gpio power supply shut down, we need to
set gpio2 ~ gpio4 to input and HiZ status when suspend, and recovery
they status when rusume. we do it base on apio pass from loader.
Change-Id: I59fd2395e5e37e63425472a39f519822c9197e4c
some specific board need to disable/enable specific gpio when
suspend/resume, so we add this function, bootloader can pass the
specific gpio, and we can handle these gpios in bl31 suspend/resuem
function.
Change-Id: I373b03ef9202ee4a05a2b9caacdfa01b47ee2177
We may need gpio pull mode later, so add this function.
Besides fix a set pull mode bug, and save gpio clock gate,
when operate the gpio, we will enable gpio clock, when
finish gpio operate, restore gpio clock gate status.
Change-Id: Ia1d602804f571a17f5ddc499908663b968b02974
The `psci_plat_pm_ops` global pointer is initialized during cold boot by the
primary CPU and will be accessed by the secondary CPUs before enabling data
cache during warm boot. This patch adds a missing data cache flush of
`psci_plat_psci_ops` after initialization during psci_setup() so that
secondaries can see the updated `psci_plat_psci_ops` pointer.
FixesARM-software/tf-issues#424
Change-Id: Id4554800b5646302b944115a33be69507d53cedb
As rk3399 reported the d8/octane scores drop 10% with cpu idle.
The root cause is thc cpu cluster enter the slow mode.
We don't need switch the clock to 24MHz if cpu cluster enter the
retention mode. In order to improve performance, it just needs for
cluster enter powering off mode.
Also, we shouldn't do anything for hlvl if the system is off.
Change-Id: I2a02962a01343abd0cba47ed63192c1cdf88b119
This patch fixes a bug in context management library when writing
SCTLR register during context initialization. The write happened
prior to initialization of the register context pointer. This
resulted in the compiler optimizing the write sequence from the
final binary and hence SCTLR remains uninitialized when
entering normal world. The bug is fixed by doing the
initialization of the register context pointer earlier in the
sequence.
Change-Id: Ic7465593a74534046b79f40446ffa1165c52ed76
Given the service name and timestamp id, this assembler macro
calculates the offset into a memory region where the per-cpu timestamp
value is located.
Change-Id: I47f6dfa2a17be182675e2ca0489d6eed42433209
More headers will be needed soon so better to move these to their own
directory to avoid cluttering include/lib.
Change-Id: I6a72dc5b602d6f51954cf60aadd1beb52a268670
For the PMU design, we don't expect to get the interrupts before enter
the power mode. Since that will cause the confusion for the state
machine in the power mode.
Change-Id: Id8dee79ae617a66271b5caf92caf35f520f45099
If we don't enable the Schmitt trigger on the 32 kHz clock then systems
won't always resume from suspend properly. Presumably anything else in
the system that relies on the 32 kHz clock also will have problems
without the Schmitt trigger enabled.
Enable it always since having the 32 kHz clock on GPIO0_A0 isn't
exactly an optional feature, so all boards using rk3399 will need this.
Change-Id: Idc18c6cd1adc5be5f60efd9cb805d83d5cd40129
add auto_pd_dis_freq parameter, we can pass a frequency from kernel
to disable or enable ddr auto power down function.
Change-Id: Ie30914701336c59047c380381c6b75dd76a89562
add dram driver, and kernel can through sip function talk to bl31 to
do ddr frequency scaling. and ddr auto powerdown.
Change-Id: I0d0f2869aed95e336c6e23ba96a9310985c84840
davidcunado-arm
dp-arm
Soren Brinkmann
Siva Durga Prasad Paladugu
Nava kishore Manne
Filip Drazic
Stefan Krsmanovic
Naga Sureshkumar Relli
Mirela Simonovic
Caesar Wang
Yatharth Kochar
Leon Chen
danh-arm
Soby Mathew
Tony Xie