This patch adds support for forwarding the following PSCI messages
received by the SPMC at EL3 to the S-EL1 SP if the SP has indicated
that it wishes to receive the appropriate message via its manifest.
1. A PSCI CPU_OFF message in response to a cpu hot unplug request
from the OS.
2. A message to indicate warm boot of a cpu in response to a cpu
hot plug request from the OS.
3. A PSCI CPU_SUSPEND message in response to a cpu idle event
initiated from the OS.
4. A message to indicate warm boot of a cpu from a shallow power
state in response to a cpu resume power event.
This patch also implements the FFA_SECONDARY_EP_REGISTER function to
enable the SP specify its secondary entrypoint.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I375d0655b2c6fc27445facc39213d1d0678557f4
This patch introduces the core support for enabling an SPMC in EL3
as per the FF-A spec.
The current implemented functionality is targeted to enable
initialization of the SPMC itself and initial support for
bringing up a single S-EL1 SP.
This includes initialization of the SPMC's internal state,
parsing of an SP's manifest, preparing the cpu contexts and
appropriate system registers for the Secure Partition.
The spmc_smc_handler is the main handler for all incoming SMCs
to the SPMC, FF-A ABI handlers and functionality will
be implemented in subsequent patches.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: Ib33c240b91e54cbd018a69fec880d02adfbe12b9
Introduced by FF-A v1.1 we must forward a call to FFA_VERSION
to the SPMC so that the ffa version of the caller can be stored
for later use. Since the return of FFA_VERSION is not wrapped in
a FF-A call we need to use a direct message request to do this
forwarding. For the spmd_handler in the SPMC to hand off to the
correct function we use w2 to specify a target framework function.
Therefore we must update PSCI CPU_OFF to do this as well.
Change-Id: Ibaa6832b66f1597b3d65aa8986034f0c5916016d
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Define a handler in the SPMD to route secure interrupts occurring while
the normal world runs. On a Group1 Secure interrupt (with a GICv3 or a
Group0 interrupt on GICv2), the normal world is pre-empted to EL3 and
redirected to the SPMD/SPMC for further handling.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Change-Id: I1350d74048c5549a2af8da0ba004c08512cc006a
Remove the former impdef SPMD service for SPMC entry point
registration. Replace with FFA_SECONDARY_EP_REGISTER ABI
providing a single entry point address into the SPMC for
primary and secondary cold boot.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I067adeec25fc12cdae90c15a616903b4ac4d4d83
Define SPMD PM hooks for warm boot and off events. svc_on_finish handler
enters the SPMC at the entry point defined by the secondary EP register
service. The svc_off handler notifies the SPMC that a physical core is
being turned off through a notification message.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I2609a75a0c6ffb9f6313fc09553be2b29a41de59
Upon booting, the SPMC running on the primary core shall register the
secondary core entry points to which a given secondary core being woken
up shall jump to into the SPMC . The current implementation assumes the
SPMC calls a registering service implemented in the SPMD for each core
identified by its MPIDR. This can typically happen in a simple loop
implemented in the early SPMC initialization routines by passing each
core identifier associated with an entry point address and context
information.
This service is implemented on top of a more generic SPMC<=>SPMD
interface using direct request/response message passing as defined by
the FF-A specification.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I1f70163b6b5cee0880bd2004e1fec41e3780ba35
FF-A interface to handle SPMC to SPMD direct messages requests.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: Ia707a308c55561a31dcfa86e554ea1c9e23f862a
This patch adds SPMC states used by the SPMD to track SPMC boot phases
specifically on secondary cores.
Change-Id: If97af7352dda7f04a8e46a56892a2aeddcfab91b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
This patch provides a helper to get the entry_point_info
structure used by the boot CPU as it is used to initialise
the SPMC context on secondary CPUs.
Change-Id: I99087dc7a86a7258e545d24a2ff06aa25170f00c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
SPCI is renamed as PSA FF-A which stands for Platform Security
Architecture Firmware Framework for A class processors.
This patch replaces the occurrence of SPCI with PSA FF-A(in documents)
or simply FFA(in code).
Change-Id: I4ab10adb9ffeef1ff784641dfafd99f515133760
Signed-off-by: J-Alves <joao.alves@arm.com>
As a follow-up to bdd2596d4, and related to SPM Dispatcher
EL3 component and SPM Core S-EL2/S-EL1 component: update
with cosmetic and coding rules changes. In addition:
-Add Armv8.4-SecEL2 arch detection helper.
-Add an SPMC context (on current core) get helper.
-Return more meaningful error return codes.
-Remove complexity in few spmd_smc_handler switch-cases.
-Remove unused defines and structures from spmd_private.h
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I99e642450b0dafb19d3218a2f0e2d3107e8ca3fe
This patch introduces the `SPCI_ID_GET` interface which will return the
ID of the calling SPCI component. Returns 0 for requests from the
non-secure world and the SPCI component ID as specified in the manifest
for secure world requests.
Change-Id: Icf81eb1d0e1d7d5c521571e04972b6e2d356e0d1
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
This patch adds a rudimentary SPM dispatcher component in EL3.
It does the following:
- Consumes the TOS_FW_CONFIG to determine properties of the SPM core
component
- Initialises the SPM core component which resides in the BL32 image
- Implements a handler for SPCI calls from either security state. Some
basic validation is done for each call but in most cases it is simply
forwarded as-is to the "other" security state.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: I7d116814557f7255f4f4ebb797d1619d4fbab590