Replace all uses of 'SGI_CLARK' with 'RD_N1E1_EDGE' and
'SGI_CLARK_HELIOS' with 'RD_E1_EDGE' as per the updated product
names
Change-Id: Ib8136e421b1a46da1e5df58c6b1432d5c78d279b
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this header.
As all the symbols refer to virtual addresses, they have to be
uintptr_t, not unsigned long. This has also been fixed in bl_common.h.
Change-Id: I204081af78326ced03fb05f69846f229d324c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Use full include paths like it is done for common includes.
This cleanup was started in commit d40e0e08283a ("Sanitise includes
across codebase"), but it only cleaned common files and drivers. This
patch does the same to Arm platforms.
Change-Id: If982e6450bbe84dceb56d464e282bcf5d6d9ab9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
On ARM platforms, the BL2 memory can be overlaid by BL31/BL32. The memory
descriptors describing the list of executable images are created in BL2
R/W memory, which could be possibly corrupted later on by BL31/BL32 due
to overlay. This patch creates a reserved location in SRAM for these
descriptors and are copied over by BL2 before handing over to next BL
image.
Also this patch increases the PLAT_ARM_MAX_BL2_SIZE for juno when TBBR
is enabled.
FixesARM-Software/tf-issues#626
Change-Id: I755735706fa702024b4032f51ed4895b3687377f
Signed-off-by: Sathees Balya <sathees.balya@arm.com>
From now on, platform_def.h must include any header with definitions that
are platform-specific (like arm_def.h) and the included headers mustn't
include back platform_def.h, and shouldn't be used by other files. Only
platform_def.h should be included in other files. This will ensure that all
needed definitions are present, rather than needing to include all the
headers in all the definitions' headers just in case.
This also prevents problems like cyclic dependencies.
Change-Id: I9d3cf4d1de4b956fa035c79545222697acdaf5ca
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The definitions in bl1/bl1_private.h and bl2/bl2_private.h are useful for
platforms that may need to access them.
Change-Id: Ifd1880f855ddafcb3bfcaf1ed4a4e0f121eda174
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Update some asserts that refer to #defines that only occur in
ARM platforms, preventing this code to be used on other platforms.
Instead, use a platform agnostic name, and update all the existing
users.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The top level makefile defines the PLAT variable, not PLATFORM.
This mistake was causing an empty variable expansion and showing an
incomplete error message.
Change-Id: I5da1275c73c61a7c1823643a76300f255841719d
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a2 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
For SGI-Clark.Helios platform, at present, only the CPU power ON/OFF
ops are supported. So override the PSCI ops to allow callbacks only
for CPU power ON/OFF operations.
Change-Id: Idc0a3deb78cb850310cbe849d77604fa9881579c
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
SGI-Clark.Helios platform is based on multi-threaded CPUs and uses an
additional thread power domain level as well.
Define a power domain tree descriptor 'sgi_clark_helios_pd_tree_desc'
for SGI-Clark.Helios platform and let the function
'plat_get_power_domain_tree_desc' pick up the correct power
domain tree descriptor based on the platform.
Change-Id: Ibc6d551b570bc740053316a3608c455679d9155b
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
With the two new APIs 'plat_arm_sgi_get_platform_id' and
'plat_arm_sgi_get_config_id' that are available now, BL31 need not
depend on hw_config device tree to identify the platform. In addition
to this, the existing hardware description in hw_config can be limited
to use by BL33 and not by the operating system.
So the hardware description from hw_config dts can be moved into
nt_fw_config dts and the use of hw_config dts can be removed.
Change-Id: I873b7e1e72823d3ec5d253a848e85ae724f09e49
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Add two new functions 'plat_arm_sgi_get_platform_id' and
'plat_arm_sgi_get_config_id' which will be implemented by all the
SGI platforms. These functions can be used to determine the part
number and configuration id of the SGI platforms.
In BL2, these functions are used to populate the 'system-id' node.
In BL31, these functions are used to populate the 'sgi_plat_info_t'
structure with the part number and configuration id of the platform.
Change-Id: I3bacda933527724a3b4074ad4ed5b53a81ea4689
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
In order to allow Arm platforms to override the default list of PSCI
callbacks, remove the existing weak implementation of
'plat_arm_psci_override_pm_ops' function and let all the Arm platforms
implement their own 'plat_arm_psci_override_pm_ops' function.
For platforms that support SCMI protocol, the function
'css_scmi_override_pm_ops' can be additionally used as well to
override the default PSCI callbacks.
Change-Id: If7c27468bd51a00ea9c2a3716b5894163f5a9f3c
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
For platforms with multi-threaded CPUs, the number of power domains
supported would be more than the value currently defined by
PLAT_MAX_PWR_LVL. So move the PLAT_MAX_PWR_LVL macro to platform
specific code and let the platform define the number of power domain
levels.
Change-Id: I21c0682e62b397860b2999031a0c9c5ce0d28eed
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
To support platforms which are based on multi-threaded CPUs, override
the weak implementation of plat_arm_get_cpu_pe_count function to return
the number of threads supported by the CPU used in the platform.
Change-Id: Ia680773f1277b17e2d3d2414d87943dcece33e89
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Remove the platform common plat_arm_security_setup function to allow
platform specific implementations of the security setup function
implemented in the board directory of the platform.
For use by secure software, configure region0 of DMC-620 trustzone
controller to protect the upper 16MB of memory of the first DRAM block
from non-secure accesses.
Change-Id: I9a8c19656702c4fa4f6917b3655b692d443bb568
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Register a priority level, PLAT_SP_PRI, for secure partition with EL3
exception handling framework(ehf) module.
The secure partition manager(SPM) would raise the core's priority to
PLAT_SP_PRI before entering the secure partition, to protect the core
from getting interrupted while in secure partition.
Change-Id: I686897f052a4371e0efa9b929c07d3ad77249e95
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.
The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.
The exceptions are files that are imported from other projects:
- CryptoCell driver
- dt-bindings folders
- zlib headers
Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
SGI-Clark platform is the next version in the Arm's SGI platform
series. One of the primary difference between the SGI-575 platform and
the SGI-Clark platform is the MHU version (MHUv2 in case of SGI-Clark).
Add the required base support for SGI-Clark platform.
Change-Id: If396e5279fdf801d586662dad0b55195e81371e4
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
On SGI platforms that include Ares CPUs, the 'CORE_PWRDN_EN' bit of
'CPUPWRCTLR_EL1' register requires an explicit write to clear it to
enable hotplug and idle to function correctly.
The reset value of the CORE_PWRDN_EN bit is zero but it still requires
this explicit clear to zero. This indicates that this could be a model
related issue but for now this issue can be fixed be clearing the
CORE_PWRDN_EN bit in the platform specific reset handler function.
Change-Id: I8b9884ae27a2986d789bfec2e9ae792ef930944e
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
The default values of 'plat_css_scmi_plat_info' is not applicable for
all the platforms. There should be a provision to let platform code to
register a platform specific instance of scmi_channel_plat_info_t.
Add a new API 'plat_css_get_scmi_info' which lets the platform to
register a platform specific instance of scmi_channel_plat_info_t and
remove the default values.
In addition to this, the existing 'plat_css_scmi_plat_info' structure
is removed from the common code and instantiated for the platforms that
need it. This allows for a consistent provisioning of the SCMI channel
information across all the existing and upcoming platforms.
Change-Id: I4fb65d7f2f165b78697b4677f1e8d81edebeac06
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Dynamically populating the 'system-id' node in the HW_CONFIG dts makes
it difficult to enforce memory overlap checks. So add the system-id node
in the HW_CONFIG dts file as a place holder with 'platform-id' and
'config-id' set to zero.
The code at BL2 stage determines the values of 'platform-id' and
'config-id' at runtime and updates the corresponding fields in the
system-id node of HW_CONFIG dts.
Change-Id: I2ca9980b994ac418da8afa0c72716ede10aff68a
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
To align the placement of ftds files with that of other Arm platforms,
move the ftds files from plat/arm/css/sgi/ to plat/arm/board/sgi575.
Change-Id: Id7c772eb5cf3d308d4e02a3c8099218e889a0e96
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
On SGI platforms, the interconnect is setup by the SCP and so the
existing unused interconnect setup in sgi575 platform code can be
removed. As a result of this, sgi_plat_config.c and sgi_bl1_setup.c
files can be removed as these files are now empty or can be
substainated by the existing weak functions.
Change-Id: I3c883e4d1959d890bf2213a9be01f02551ea3a45
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
In preparation of adding support for upcoming SGI platforms, macros
common to all the SGI platforms are moved into sgi_base_platform_def.h
file. Macros that are specific to sgi575 platform remain in the
platform_def.h file. In addition to this, the platform_def.h file is
moved to sgi575 board directory. Also the ENT_CPU_SOURCES has been
renamed to SGI_CPU_SOURCES and moved from sgi-common.mk to board
specific makefile platform.mk
Change-Id: Iccdd9f070f4feea232b9fbf4fdcc0ef2e8eccbf2
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
macro jump_if_cpu_midr is used commonly by many arm platform.
It has now been relocated to common place to remove duplication
of code.
Change-Id: Ic0876097dbc085df4f90eadb4b7687dde7c726da
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
This file is shared between FVP and all CSS platforms. While it may be
true that some definitions can be common, it doesn't make sense
conceptually. For example, the stack size depends on the platform and so
does the SRAM size.
After removing them, there are not enough common definitions to justify
having this header, so the other definitions have been moved to the
platform_def.h of FVP, board_css_def.h and arm_def.h.
Change-Id: Ifbf4b017227f9dfefa1a430f67d7d6baae6a4ba1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This lets any future CSS platforms to use RESET_TO_BL31 flag.
Change-Id: I32a90fce43cb0c6f4d33589653a0fd6a7ecc9577
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
Mark the initialization functions found in the BL31 boot sequence
as __init so they can be reclaimed when no longer needed.
Change-Id: I687a89346419c7710ef5097feaa325d83c527697
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
This option makes it hard to optimize the memory definitions of all Arm
platforms because any change in the common defines must work in all of
them. The best thing to do is to remove it and move the definition to
each platform's header.
FVP, SGI and SGM were using the definitions in board_arm_def.h. The
definitions have been copied to each platform's platform_def.h. Juno
was already using the ones in platform_def.h, so there have been no
changes.
Change-Id: I9aecd11bbc72a3d0d7aad1ef9934d8df21dcfaf2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Fixed a Coverity defect by adding a runtime check to avoid potential
NULL pointer dereference.
Change-Id: I9a0aa0efd27334131ac835b43348658b436c657d
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
The Arm SGI platforms can switch to using SCMI. So enable support for
SCMI and remove portions of code that would be unused after switching
to SCMI.
Change-Id: Ifd9e1c944745f703da5f970b5daf1be2b07ed14e
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
On SGI platforms, the 'CORE_PWRDN_EN' bit of 'CPUPWRCTLR_EL1'
register requires an explicit write to clear it for hotplug and
idle to function correctly. The reset value of this bit is zero
but it still requires this explicit clear to zero. This indicates
that this could be a model related issue but for now this issue can
be fixed be clearing the CORE_PWRDN_EN in the platform specific
reset handler function.
Change-Id: I4222930daa9a3abacdace6b7c3f4a5472ac0cb19
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Add the various flags that are required to build the components needed
to enable the RAS feature on SGI575 platform. By default, all flags
are set to 0, disabling building of all corresponding components.
Change-Id: I7f8536fba895043ef6e397cc33ac9126cb572132
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Add platform specific changes needed to add support for the RAS
feature on SGI575 platform, including adding a mapping for the
CPER buffer being used on SGI575 platform.
Change-Id: I01a982e283609b5c48661307906346fa2738a43b
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Chandni Cherukuri
John Tsichritzis
Antonio Nino Diaz
Sathees Balya
Soby Mathew
Ard Biesheuvel
Sandrine Bailleux
Vijayenthiran Subramaniam
Sughosh Ganu
Deepak Pandey
Daniel Boulby