The static was found by sparse tool:
drivers/st/pmic/stm32mp_pmic.c:456:18: warning: symbol 'pmic_ops'
was not declared. Should it be static?
The const was also missing.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ibb5cfaf67ac980bf0af27712a95dbef05b617c25
UART oversampling by 8 allows higher baud rates for UART. This is
required when (UART freq / baudrate) <= 16. In this case the OVER8 bit
needs to be enabled in CR1 register. And the BRR register management is
different:
USARTDIV = (2 * UART freq / baudrate) (with div round nearest)
BRR[15:4] = USARTDIV[15:4]
BRR[3] = 0
BRR[2:0] = USARTDIV[3:0] >> 1
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ia3fbeeb73a36a4dc485c7ba428c531e65b6f6c09
To get the nearest divisor for BRR register, we use:
Divisor = (Uart clock + (baudrate / 2)) / baudrate
But lsl was wrongly used instead of lsr to have the division by 2.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Iedcc3ccdb4cf8268012e82a66df2a9ec48fc1d79
The issue was found by Coverity:
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL4]" when calling
"stm32mp1_check_pll_conf".
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL3]" when calling
"stm32mp1_check_pll_conf".
Check PLL configs are valid before using pllcfg.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I49de849eaf451d0c165a8eb8555112a0a4140bbc
Common mbedTLS implementation include the fixed configuration
file of mbedTLS and that does not gives flexilibility to the
platform to include their own mbedTLS configuration.
Hence changes are done so that platform can include their own
mbedTLS configuration file.
Signed-off-by: Lucian Paul-Trifu <lucian.paul-trifu@arm.com>
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Change-Id: I04546589f67299e26b0a6a6e151cdf1fdb302607
ufs_read_blocks always zeros out the buffer before passing
to UFS for DMA. We don't need to zero out buf before reading
from UFS storage, this change remove the memset in ufs_read_blocks.
Signed-off-by: Channa Kadabi <kadabi@google.com>
Change-Id: I8029a7ea07fbd8cce29b383c80a3cfc782c5b7ec
With gcc-11, the -Wformat-signedness warning complains about enum values
that should be printed as unsigned values. Change %d to %u for several
lines in the clock driver.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ia2d24e6feef5e852e0a6bfaa1286fe605f9a16b7
* changes:
fix(nxp-crypto): refine code to avoid hang issue for some of toolchain
build(changelog): add new scope for nxp crypto
fix(lx2): drop erratum A-009810
Notice that aldo1 is typically useful for the Olimex A64 board, where
it powers the PE bank through the vcc-pe line.
Without it, it is not possible to light the user led on PE17, for
instance.
Change-Id: I70588bc977b884b22df87f1b075549cb8925925a
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
bitfield structure maybe has strict-aliasing issue for some compiler,
for example the old code has hang issue for yocto 3.4 toolchain, so
refine the code to avoid to use bitfield structure.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6b6d7597311240dd6d6b8ca4ce508c69332f9c68
* changes:
docs(layerscape): add ls1046a soc and board support
feat(ls1046aqds): add board ls1046aqds support
feat(ls1046afrwy): add ls1046afrwy board support
feat(ls1046ardb): add ls1046ardb board support
feat(ls1046a): add new SoC platform ls1046a
fix(nxp-tools): fix tool location path for byte_swape
fix(nxp-qspi): fix include path for QSPI driver
build(changelog): add new scopes for NXP layerscape platforms
Replace %d with %u in log, to avoid warning when
-Wformat-signedness is enabled.
Change-Id: Ied5823520181f225ae09bd164e2e52e9a7692c60
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As cmd_idx is unsigned, we have to use %u and not %d.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: I6954a8c939f3fb47dbb2c6db56a1909565af078b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As page is unsigned, we should use %u and not %d.
Find with -Wformat-signedness.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I7205971ee5e83163e4fe47d33bb9e90832b59ae0
Some messages don't use the correct types, update them.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: Ie5384a7d139c48a623e1617c93d15fecc8a36061
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As filter is unsigned, we have to use %u and not %d.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: I9fc9f15774dc974edfa3db65f5aecd1e70bc146b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the SZ_* macros from 32 to 2G.
This allows removing some defines in raw NAND driver
and STM32MP1 boot device selection code.
Change-Id: I3c4d4959b0f43e785eeb37a43d03b2906b7fcfbc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Previously ufs_write_blocks was memsetting the write buffer before
calling ufs_prepare_cmd, causing zeros to be written to UFS. This change
deletes the memset call so the original buffer contents get written to
UFS.
Signed-off-by: Jorge Troncoso <jatron@google.com>
Change-Id: I3299f11b30e6d7d409408ce11a6759c88607ee18
From the new binding, the RCC become secured based on the new
compatible. This must be done only from the secure OS initialisation.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I7f0a62f22bfcca638ddaefc9563df00f89f01653
The Event Log sources are added to the source-list of BL1 and BL2
images in the Event Log Makefile. It doesn't seem correct since
some platforms only compile Event Log sources for BL2.
Hence, moved compilation decision of Event Log sources to the
platform makefile.
Change-Id: I1cb96e24d6bea5e091d08167f3d1470d22b461cc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
At boot, the devices under ETZPC control are secured, so should be
their GPIOs. As securable GPIOs are secured by default, keep the reset
values in BL2.
Change-Id: I9e560d936f8e8fda0f96f6299bb0c3b35ba9b71f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Allow to set a gpio in output mode from the device tree.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: Ic483324bc5fe916a60df05f74706bd1da4d08aa5
No functional, change, but some improvements:
- Declare set_gpio() as static (only called locally)
- Handle the type ('open-drain') property independently from the
mode one.
- Replace mmio_clrbits_32() + mmio_setbits_32() with
mmio_clrsetbits_32().
- Add a missing log
- Add missing U() in macro definitions
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: I1a79609609ac8e8001127ebefdb81def573f76fa
Rename driver file to BSEC2.
Split header file in IP and feature parts.
Add functions to access BSEC scratch register.
Several corrections and improvements.
Probe the driver earlier, especially to check debug features.
Change-Id: I1981536398d598d67a19d2d7766dacc18de72ec1
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add support for regulator-always-on at BL2 level as it was supported
before using the regulator framework.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Change-Id: Idb2f4ddc2fdd4e0d31fb33da87c84618aa2e5135
Some clocks are only required in BL2, like boot devices clocks:
FMC, QSPI.
Some clocks are only used in BL32: Timers, devices that need special
care for independent reset.
Change-Id: Id4ba99afeea5095f419a86f7dc6423192c628d82
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This change removes reference counting support in clock gating
implementation for clocks that rely on non-secure only RCC resources.
As RCC registers are accessed straight by non-secure world for these
clocks, secure world cannot safely store the clock state and even
disabling such clock from secure world can jeopardize the non-secure
world clock management framework and drivers.
As a consequence, for such clocks, stm32_clock_enable() forces the clock
ON without any increment of a refcount and stm32_clock_disable() does
not disable the clock.
Change-Id: I0cc159b36a25dbc8676f05edf2668ae63c640537
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Array stm32mp1_clk_gate[] defines the clock resources. This change
add a secure attribute to the clock: secure upon RCC[TZEN] (SEC),
secure upon RCC[TZEN] and RCC[MCKPROT] (MKP) or always accessible
from non-secure (N_S).
At init, lookup clock tree to check if any of the secure clocks
is derived from PLL3 in which case PLL3 shall be secure.
Note that this change does not grow byte size of stm32mp1_clk_gate[].
Change-Id: I933d8a30007f3c72f755aa1ef6d7e6bcfabbfa9e
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Rework the internal functions __stm32mp1_clk_enable/disable to check for
reference count instead of secure status for a clock.
Some functions now unused can be removed.
Change-Id: Ie4359110d7144229f85c961dcd5a019222c3fd25
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Simplify the assert to check if the FWU subsystem has been initialised
in the fwu_is_trial_run_state function.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I428668470ebd4b67e68777a62d5732cb96841ab9
Add a helper function to pass the metadata structure to the
platforms. Platforms can then read the metadata structure and pass the
boot index value, i.e. the bank(partition) from which the firmware
images were booted, to the Update Agent.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I571179b9baa0fbc4d0f08d7a6e3b50c0c7165c5c
With the GPT partition scheme, a partition can be identified using
it's UniquePartitionGUID, instead of it's name. Add a function to
identify the partition based on this GUID value. This functionality is
useful in identification of a partition whose UniquePartitionGUID
value is known.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I543f794e1f7773f969968a6bce85ecca6f6a1659
Copy the UniquePartitionGUID member of a GPT partition entry into the
partition_entry structure. This GUID is subsequently used to identify
the image to boot on a platform which supports multiple partitions of
firmware components using the FWU metadata structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I8b55a1ee7deb1353886fbd8ebde53055d677fee0
Corrects mapping of HNFs nodes with SNFs nodes based on their
proximity in CCN508 ring when disabling unused ddr controller.
When DDRC 2 disabled and DDR 1 is active the mapping is 0x3/3/8/8/8/8/3/3.
When DDRC 1 is disabled and DDR2 is active the mapping is 0x
18/18/13/13/13/13/18/18 .
Signed-off-by: Maninder Singh <maninder.singh_1@nxp.com>
Signed-off-by: JaiPrakash Singh <JaiPrakash.singh@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6ec1e02f8ad7e8bb8628913625ff5313a054dcc6