Although the GPC provides the similar functions for all the
i.MX8M SoC family, the HW register offset and bit defines
still have some slight difference, so move the hw reg
offset & most of the bitfield defines in 'gpc_reg.h' that
is specific to each SoC.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I291c435fe98c2f6e6ff8fe0c715ff3a83daa6a0f
The assignments to 'result' are unneeded.
Change-Id: I18899f10bf9bd7f219f0e47a981683d8b4701bde
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The memory layout for the FPGA is fairly uniform for most of the FPGA
images, and we already assume that DRAM starts at 2GB by default.
Prepopulate PRELOADED_BL33_BASE and FPGA_PRELOADED_DTB_BASE to some
sane default values, to simplify building some stock image.
If people want to deviate from that, they can always override those
addresses on the make command line.
Change-Id: I2238fafb3f8253a01ad2d88d45827c141d9b29dd
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
To support FPGAs with those cores as well, as the respective cpulib
files to the Makefile.
Change-Id: I1a60867d5937be88b32b210c7817be4274554a76
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The maximum number of clusters is currently set to 2, which is quite
limiting. As there are FPGA images with 4 clusters, let's increase the
limit to 4.
Change-Id: I9a85ca07ebbd2a018ad9668536d867ad6b75e537
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Added a build option 'COT_DESC_IN_DTB' to create chain of trust
at runtime using fconf.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92b257ac4ece8bbf56f05a41d1e4056e2422ab89
Updated the CoT binding document to show chain of trust relationship
with the help of 'authentication method' and 'authentication data'
instead of showing content of certificate and fixed rendering issue
while creating html page using this document.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib48279cfe786d149ab69ddc711caa381a50f9e2b
Register in the shared resources driver the secure or non-secure state
of the HASH instances. Note that only BL32 needs to register the
shared peripheral because BL2 does not embed the shared resources
driver.
Change-Id: I7f78fa8e47da71d48ef8b1dfe4d6f040fe918d8b
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Register in the shared resources driver the secure or non-secure state
of the GPIO pins.
Change-Id: Ifda473bcbbb0af799be6587961d6641edf887605
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Register in the shared resources driver the secure or non-secure state
of the IWDG instances.
Change-Id: I3a3bc9525447f6a2a465891ca3a3fd5fe664ca07
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Register in the shared resources driver the secure or non-secure
state of the PMIC.
Change-Id: Ic1f172ba62785018f8e9bb321782d725e2d2f434
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Introduce helper functions stm32mp_register_secure_gpio() and
stm32mp_register_non_secure_gpio() for drivers to register a
GPIO pin as secure or non-secure.
These functions are stubbed when shared resource driver is not
embedded in the BL image so that drivers do not bother whether they
shall register or not their resources.
Change-Id: I1fe98576c072ae31f75427c9ac5c9f6c4f1b6ed1
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Introduce helper functions stm32mp_register_secure_periph_iomem()
and stm32mp_register_non_secure_periph_iomem() for drivers to
register a resource as secure or non-secure based on its SoC
interface registers base address.
These functions are stubbed when shared resources driver is not
embedded (!STM32MP_SHARED_RESOURCES) so that drivers embedded
in other BL stages do not bother whether they shall register or
not their resources.
Change-Id: Icebd05a930afc5964bc4677357da5d1b23666066
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Update implementation of stm32mp_nsec_can_access_reset() based
on the registering of the shared resources.
Querying registering state locks further registration of
peripherals.
Change-Id: I5f38f2a3481780b9a71939d95984c4821c537aa4
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Update implementation of stm32mp_nsec_can_access_clock() based
on the registering of the shared resources.
Querying registering state locks further registration of peripherals.
Change-Id: If68f6d4a52c4742ba66244c6ea2d9afa08404137
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Define helper functions stm32mp_register_secure_periph() and
stm32mp_register_non_secure_periph() for platform drivers to
register a shared resource assigned to respectively secure
or non-secure world.
Some resources are related to clock resources. When a resource is
registered as secure, ensure its clock dependencies are also
registered as secure. Registering a non-secure resource does not
mandate its clock dependencies are also registered as non-secure.
Change-Id: I74975be8976b8d3bf18dcc807541a072803af6e3
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Introduce stm32mp1_register_clock_parents_secure() in stm32mp1
clock driver to allow platform shared resources to register as
secure the parent clocks of a clock registered as secure.
Change-Id: I53a9ab6aa78ee840ededce67e7b12a84e08ee843
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Define from helper functions to get a human readable string
identifier from a shared resource enumerated ID. Use them to
make debug traces more friendly peripheral registering functions.
Change-Id: I9e207b8ce1d1e9250e242ca7e15461b9a1532f40
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
This patch adds the IIDR value for GIC600-AE to the gicv3_is_gic600()
helper function. This helps platforms supporting this version of the
GIC600 interrupt controller to function with the generic GIC driver.
Verified with tftf-validation test suite
******************************* Summary *******************************
> Test suite 'Framework Validation'
Passed
> Test suite 'Timer framework Validation'
Passed
=================================
Tests Skipped : 0
Tests Passed : 6
Tests Failed : 0
Tests Crashed : 0
Total tests : 6
=================================
NOTICE: Exiting tests.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I518ae7b56f7f372e374e453287d76ca370fc3574
This patch performs the following:
- Creating two corstone700 platforms under corstone700 board:
fvp and fpga
- Since the FVP and FPGA have IP differences, this commit provides a specific DTS for each platform
- The platform can be specified using the TARGET_PLATFORM Makefile variable
(possible values are: fvp or fpga)
- Allowing to use u-boot by:
- Enabling NEED_BL33 option
- Fixing non-secure image base: For no preloaded bl33 we want to
have the NS base set on shared ram. Setup a memory map region
for NS in shared map and set the bl33 address in the area.
- Setting the SYS_COUNTER_FREQ_IN_TICKS based on the selected
platform
- Setting ARM_MAP_SHARED_RAM and ARM_MAP_NS_SHARED_RAM to use MT_MEMORY
Change-Id: I4c8ac3387acb1693ab617bcccab00d80e340c163
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Querying the 'fiptool' for help or help <command> should return 0
return status (success) and not 1 (failure). In the other hand, if tool is
executed with any other command (not help) where command's parameters are
either missing or wrong, then the tool should return non-zero (failure). Now,
the 'usage' function caller is the one that passes the return status.
Change-Id: Id5eea91037cd810fb1e34a42e8199ef504f5daa4
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>
Fix the version inconsistency in the same file.
I tested QEMU 5.0.0, and it worked for me.
Change-Id: I9d8ca9aae1e413410eb5676927e13ae4aee9fad8
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In my understanding, /dev/vda2 does not exist unless you add
virtio drive to the qemu command line.
The rootfs is already specified by '-initrd rootfs.cpio.gz'.
Change-Id: Ifdca5d4f3819d87ef7e8a08ed870872d24b86370
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit solves the limitation, "No build instructions for
QEMU_EFI.fd and rootfs-arm64.cpio.gz"
Document the steps to build them.
Change-Id: Ic6d895617cf71fe969f4aa9820dad25cc6182023
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add support for the iEi Puzzle-M801 board that is based on
the Marvell Armada 88F8040 SoC.
It supports 1 x 288-pin DIMM, DDR4 2400MHz up to 16 GB (ECC).
The iEi Puzzle-M801 board is using a custom MCU to handle board
power management. The MCU is managing the boards power LEDs, fans
and some other periferals. It's using UART for communication.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: I0826ef8bf651b69aad5803184f20930ac7212ef8
Use the BOARD_DIR variable instead of PLAT_FAMILY_BASE variable for
determening the path of the system_power.c file.
The variable was not updated, when it was deprecated in a8k_common.mk
in commit 613bbde09e.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: I9b4659a19ba3cd5c869d44c5d834b220f49136e8
Fix all external broken links reported by Sphinx linkcheck tool.
This does not take care of broken cross-references between internal
TF-A documentation files. These will be fixed in a future patch.
Change-Id: I2a740a3ec0b688c14aad575a6c2ac71e72ce051e
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
There were some links in the file "ras.rst" which were broken, this
patch fixes all the broken links in this file.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I00cf080e9338af5786239a4843cb4c2e0cc9d99d
The TF-A firmware build system is capable of building on both Unix like
and Windows host PCs. The commit ID 7ff088 "Enable MTE support" updated
the Makefile to conditionally enable the MTE support if the AArch64
architecture revision was greater than 8.5. However, the Makefile changes
were dependent on shell commands that are only available on unix shells,
resulting in build failures on a Windows host PC.
This patch fixes the Makefile by using a more portable approach for
comparing the architecture revision.
Change-Id: Icb56cbecd8af5b0b9056d105970ff4a6edd1755a
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Added assert in the code to check valid address of dtb information
structure retrieved from fw_config device tree.
This patch fixes coverity defect:360213.
Also, removed conditional calling of "fconf_populate" as "fconf_populate"
function already checks the validity of the device tree address received
and go to panic in case of address is NULL.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib83e4e84a95e2456a12c7a2bb3fe70461d882cba
The non-secure world has no business accessing the CPU power switches in
the PRCM; those are handled by TF-A or the SCP. Only allow access to the
clock control part of the PRCM.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I657b97f4ea8a0073448ad3343fbc66ba168ed89e
The current BL33 size is large enough for U-Boot, but we need to
increase the limit to use other boot loaders such as edk2.
Increase the buffer size used for GZIP decompression too.
BL33 max size (UNIPHIER_BL33_MAX_SIZE): 1MB -> 8MB
GZIP buffer (UNIPHIER_IMAGE_BUF_SIZE): 1MB -> 8MB
Increasing the block buffer size (UNIPHIER_BLOCK_BUF_SIZE) is not
required, but I increased it too to make it work more efficiently.
Change-Id: I4fa6d795bed9ab9ada7f8f616c7d47076139e3a8
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The .rela.dyn section is the same for BL2-AT-EL3, BL31, TSP.
Move it to the common header file.
I slightly changed the definition so that we can do "RELA_SECTION >RAM".
It still produced equivalent elf images.
Please note I got rid of '.' from the VMA field. Otherwise, if the end
of previous .data section is not 8-byte aligned, it fails to link.
aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
make: *** [Makefile:1071: build/qemu/release/bl31/bl31.elf] Error 1
Change-Id: Iba7422d99c0374d4d9e97e6fd47bae129dba5cc9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Sandrine Bailleux
Jacky Bai
Masahiro Yamada
Andre Przywara
Manish V Badarkhe
Etienne Carriere
Varun Wadekar
Manish Pandey
Abdellatif El Khlifi
Leonardo Sandoval
Luka Kovacic
Madhukar Pappireddy
Mark Dykes
Lauren Wehrmeister
Sami Mujawar
Samuel Holland