After disconnect Jumper pin 1-2 in J15 header, the signal VBUS_DET is to
be pulled down to low level. This will assert the interrupt signal in
PMIC and trigger IRQ in GIC; the asserted signal from VBUS_DET is level
triggered and kernel reports the warning for unhooked interrupt handling;
and VBUS_DET stays with low level, this triggers IRQ storm in kernel.
This patch is to disable interrupt for VBUS_DET in PMIC, this can
dismiss the verbose log and IRQ storm after kernel booting.
[ 40.835279] irq 57: nobody cared (try booting with the "irqpoll" option)
[ 40.842075] CPU: 0 PID: 980 Comm: irq/57-hi655x-p Not tainted 4.4.77-568944-g576a0114dec8-dirty #667
[ 40.851303] Hardware name: HiKey Development Board (DT)
[ 40.856580] Call trace:
[ 40.859060] [<ffffff800808c4cc>] dump_backtrace+0x0/0x1e0
[ 40.864516] [<ffffff800808c8ac>] show_stack+0x20/0x28
[ 40.869622] [<ffffff80084b9688>] dump_stack+0xa8/0xe0
[ 40.874729] [<ffffff800812dd5c>] __report_bad_irq+0x40/0xec
[ 40.880360] [<ffffff800812e0bc>] note_interrupt+0x1e4/0x2d8
[ 40.885992] [<ffffff800812b11c>] handle_irq_event_percpu+0xd8/0x268
[ 40.892324] [<ffffff800812b2f8>] handle_irq_event+0x4c/0x7c
[ 40.897955] [<ffffff800812ecbc>] handle_level_irq+0xcc/0x178
[ 40.903672] [<ffffff800812a778>] generic_handle_irq+0x34/0x4c
[ 40.909481] [<ffffff80085074c8>] pl061_irq_handler+0xa8/0x124
[ 40.915286] [<ffffff800812a778>] generic_handle_irq+0x34/0x4c
[ 40.921092] [<ffffff800812a820>] __handle_domain_irq+0x90/0xf8
[ 40.926985] [<ffffff8008082620>] gic_handle_irq+0x58/0xa8
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions to this change in order to retain
header groupings and where there are headers within #if statements.
Change-Id: Ib5b668c992d817cc860e97b29e16ef106d17e404
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>
PLATFORM_LINKER_FORMAT
and
PLATFORM_LINKER_ARCH
defines are removed from
plat/hisilicon/hikey/include/platform_def.h
since there are already defined in
include/plat/common/common_def.h
which is included by
plat/hisilicon/hikey/hikey_def.h
which is included by
plat/hisilicon/hikey/include/platform_def.h
The line
$(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw))
is removed from
plat/hisilicon/hikey/platform.mk
to clear the warning below:
Makefile:544: warning: overriding commands for target `check_SCP_BL2'
plat/hisilicon/hikey/platform.mk:19: warning: ignoring old commands for target `check_SCP_BL2'
$(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw))
already exists in
Makefile
and applies to plat hikey so is redundant in
plat/hisilicon/hikey/platform.mk
Signed-off-by: Victor Chong <victor.chong@linaro.org>
This patch makes all the defines in the CPU libraries unique,
by prefixing them with the CPU name.
NOTE: PLATFORMS USING THESE MACROS WILL HAVE TO UPDATE THEIR CODE
TO START USING THE UPDATED NAMES
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch is to enable CPU suspend/resume and system level's
suspend/resume; also enable system power off state.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
The cluster 0 doesn't rely on PSCI to enable it; so enable CCI port
for cluster 0 in BL31 platform setup flow.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Fix for CPU topology so present the CPU core numbers for two clusters;
Base on this fixing, the PSCI can maintain correct power states.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Support BL31 and PSCI. Enable multiple cores in PSCI.
Change-Id: I66c39e1e9c4c45ac41a0142ed2070d79a3ac5ba3
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Dan Handley <dan.handley@arm.com>
BL2 is used to load BL31 and SCP_BL2. In HiKey platform, SCP_BL2
is the mcu firmware that is used to scale cpu frequency and switch
low power mode.
Change-Id: I1621aa65bea989fd125ee8502fd56ef72362bf97
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Dan Handley <dan.handley@arm.com>
Initialize regulators, pins and eMMC in BL1. Only SRAM could be used in BL1.
So BL2 will be loaded from eMMC into SRAM later.
Change-Id: I8e7ef82ffa29a3c647c9d2d2981e8759ee85d833
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Dan Handley <dan.handley@arm.com>
Leo Yan
davidcunado-arm
Isla Mitchell
Victor Chong
Haojian Zhuang
Varun Wadekar
danh-arm
Vincent Guittot