When configuring the UART_BAUD_REG register, the function
console_a3700_core_init() currently only changes the baud divisor field,
leaving other fields to their previous value.
This is incorrect, because the baud divisor is computed with the
assumption that the parent clock rate is 25 MHz, and since the other
fields in this register configure the parent clock, which could have
been changed by U-Boot or Linux.
Fix this function to also configure the other fields so that the UART
parent clock is selected to be the xtal clock.
For example without this change TF-A prints only
ERROR: a3700_system_off needs to be implemented
followed by garbage after plat_crash_console_init() is called.
After applying this change instead of garbage it also print crash info:
PANIC at PC : 0x0000000004023800
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I72f338355cc60d939b8bb978d9c7fdd576416b81
Morello exhibits the behavior similar to Juno wherein CNTBaseN.CNTFRQ
can be written but does not reflect the value of the CNTFRQ register
in CNTCTLBase frame. This doesn't follow ARM ARM in that the value
updated in CNTCTLBase.CNTFRQ is not reflected in CNTBaseN.CNTFRQ.
Hence enable the workaround (applied to Juno) for Morello that updates
the CNTFRQ register in the Non Secure CNTBaseN frame.
Change-Id: Iabe53bf3c25152052107e08321323e4bde5fbef4
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Add support for XCK26 silicon which is available on SOM board.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ic98213328702903af8a79f487a2868f3e6d60338
This patch renames the Matterhorn, Matterhorn ELP, and Klein CPUs to
Cortex A710, Cortex X2, and Cortex A510 respectively.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I056d3114210db71c2840a24562b51caf2546e195
UART parent clock is by default the platform's xtal clock, which is
25 MHz.
The value defined in the driver, though, is 25.8048 MHz. This is a hack
for the suboptimal divisor calculation
Divisor = UART clock / (16 * baudrate)
which does not use rounding division, resulting in a suboptimal value
for divisor if the correct parent clock rate was used.
Change the code for divisor calculation to
Divisor = Round(UART clock / (16 * baudrate))
and change the parent clock rate value to 25 MHz.
The final UART divisor for default baudrate 115200 is not affected by
this change.
(Note that the parent clock rate should not be defined via a macro,
since the xtal clock can also be 40 MHz. This is outside of the scope of
this fix, though.)
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iaa401173df87aec94f2dd1b38a90fb6ed0bf0ec6
The SGI/RD platforms have been using PSCI state ID format as defined in
PSCI version prior to 1.0. This is being changed and the PSCI extended
state ID format as defined in PSCI version 1.1 is being adapted. In
addition to this, the use of Arm recommended PSCI state ID encoding is
enabled as well.
Change-Id: I2be8a9820987a96b23f4281563b6fa22db48fa5f
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Update idle flow in case of last read command timeout.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Change-Id: Idb0552d70d59b23822c38269d0fa9fe9ac0d6975
MTK display port mute/unmute control registers need to be
set in secure world.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Iec73650e937bd20e25c18fa28d55ae29e68b10d3
Two issues in documentation were identified after the release.
This patch fixes these typos.
1. Matternhorn ELP CPU was made available through v2.5 release, not
Matternhorn CPU
2. We had upgraded TF-A to use GCC 10.2 toolchain family and used this
toolchain for release testing
Change-Id: I33e59bb5a6d13f4d40dbb3352004d5b133431d65
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Use proper offset for IPI data based on offset for IPI0
channel.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I3070517944dd353c3733aa595df0da030127751a
Add some basic documentation and pointers for the SMCCC PCI
build options.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: Ia35f31d15066ea74135367cde2dce2f26e6ab31e
Add SMC wrappers for handshaking the existence
and basic parameter validation for the SMCCC/PCI
API. The actual read/write/segment validation is
implemented by a given platform which will enable
the API by defining SMC_PCI_SUPPORT.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: I4485ad0fe6003cec6f5eedef688914d100513c21
Add constants, structures and build definition for the
new standard SMCCC PCI conduit. These are documented
in DEN0115A.
https://developer.arm.com/documentation/den0115/latest
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: If667800a26b9ae88626e8d895674c9c2e8c09658
The SMCCC, part 3 indicates that only the bottom
32-bits of a 32-bit SMC call are valid. The upper
bits must be zero. Lets enforce that so standard
service code can assume its been called that way.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: I1bac50fbdc3b6ddca5fe2d1d1f96166a65ac4eb4
Add APU iommap settings for reviser, apu_ao and
devapc control wrapper.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: Ie8e6a197c0f440f9e4ee8101202283a2dbf501a6
Added support for HW computed CRC using Arm ACLE intrinsics.
These are built-in intrinsics available for ARMv8.1-A, and
onwards.
These intrinsics are enabled via '-march=armv8-a+crc' compile
switch for ARMv8-A (supports CRC instructions optionally).
HW CRC support is enabled unconditionally in BL2 for all Arm
platforms.
HW CRC calculation is verified offline to ensure a similar
result as its respective ZLib utility function.
HW CRC calculation support will be used in the upcoming
firmware update patches.
Change-Id: Ia2ae801f62d2003e89a9c3e6d77469b5312614b3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Disable non-invasive debug of secure state for Juno
in release builds. This makes sure that PMU counts
only Non-secure events.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I0d1c3f96f3b4e48360a7211ae55851d65d291025
To avoid the mistake fixed by the previous commit, ensure users install
the Node.js dependencies without polluting the lock file by passing
`--no-save` to the `npm install` line.
Change-Id: I10b5cc17b9001fc2e26deee02bf99ce033a949c1
Signed-off-by: Chris Kay <chris.kay@arm.com>
The NPM lock file was accidentally updated using a later version of
Node.js than required by the prerequisites. This upgraded the lock file
to the v2 format, which causes a warning on Node.js 14 (the
prerequisites version). This moves the lock file back to v1 by
installing the dependencies with Node.js 14.
Change-Id: I382d599fd2b67b07eb9234d14e7b631db6b11453
Signed-off-by: Chris Kay <chris.kay@arm.com>
Clean up instructions for building/running TF-A on the
Juno platform and add correct link to SCP binaries.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I536f98082e167edbf45f29ca23cc0db44687bb3b
Updated the minor version in the makefile
Change-Id: Ie2b3ce5b36a105a0e2fff52c3740cc9702ca3108
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
An indirect dependency of Commitizen (`merge`) is currently failing the
NPM.js auditor due to vulnerability CVE-2020-28499. This commit moves
the minimum version of Commitizen to 4.2.4, which has resolved this
vulnerability.
Change-Id: Ia9455bdbe02f7406c1a106f173c4095943a201ed
Signed-off-by: Chris Kay <chris.kay@arm.com>
This patch adds support for the crypto and secure storage secure
partitions for the Total Compute platform. These secure partitions
have to be managed by Hafnium executing at S-EL2
Change-Id: I2df690e3a99bf6bf50e2710994a905914a07026e
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
Madhukar Pappireddy
Pali Rohár
Manoj Kumar
Olivier Deprez
Venkatesh Yadav Abbarapu
johpow01
Manish Pandey
Pranav Madhu
Hsin-Hsiung Wang
Mark Dykes
Flora Fu
Rex-BC Chen
Rajan Vaja
Jeremy Linton
Manish V Badarkhe
Zelalem
Chris Kay
bipin.ravi
Joanna Farley
Davidson K