* changes:
refactor(plat/allwinner): clean up platform definitions
refactor(plat/allwinner): do not map BL32 DRAM at EL3
refactor(plat/allwinner): map SRAM as device memory by default
refactor(plat/allwinner): rename static mmap region constant
feat(bl_common): import BL_NOBITS_{BASE,END} when defined
The SDEI specification now says that during an SDEI
event handler dispatch the SPSR should be set according
to the TakeException() pseudocode function defined in
the Arm Architecture Reference Manual. This patch sets
the SPSR according to the function given in
ARM DDI 0487F.c page J1-7635
Change-Id: Id2f8f2464fd69c701d81626162827e5c4449b658
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
If SVE are enabled for both Non-secure and Secure world along with AMU
extension, then it causes the TAM_BIT in CPTR_EL3 to be set upon exit
from bl31. This restricts access to the AMU register set in normal
world. This fix maintains consistency in both TAM_BIT and CPTR_EZ_BIT
by saving and restoring CPTR_EL3 register from EL3 context.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Id76ce1d27ee48bed65eb32392036377716aff087
If SEPARATE_NOBITS_REGION is enabled, the platform may need to map
memory specifically for that region. Import the symbols from the linker
script to allow the platform to do so.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Iaec4dee94a6735b22f58f7b61f18d53e7bc6ca8d
Neoverse V1 erratum 1791573 is a Cat B erratum present in r0p0 and
r1p0 of the V1 processor core. It is fixed in r1p1.
SDEN can be found here:
https://documentation-service.arm.com/static/60d499080320e92fa40b4625
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ic6f92da4d0b995bd04ca5b1673ffeedaebb71d10
For Arm platforms PIE is enabled when RESET_TO_BL31=1 in aarch64 mode on
the similar lines enable PIE when RESET_TO_SP_MIN=1 in aarch32 mode.
The underlying changes for enabling PIE in aarch32 is submitted in
commit 4324a14bf
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib8bb860198b3f97cdc91005503a3184d63e15469
Enables SVE support for the secure world via ENABLE_SVE_FOR_SWD.
ENABLE_SVE_FOR_SWD defaults to 0 and has to be explicitly set by the
platform. SVE is configured during initial setup and then uses EL3
context save/restore routine to switch between SVE configurations for
different contexts.
Reset value of CPTR_EL3 changed to be most restrictive by default.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I889fbbc2e435435d66779b73a2d90d1188bf4116
Cortex A78 erratum 1821534 is a Cat B erratum present in r0p0 and
r1p0 of the A78 processor core, it is fixed in r1p1.
SDEN can be found here:
https://documentation-service.arm.com/static/603e3733492bde1625aa8780
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I71057c4b9625cd9edc1a06946b453cf16ae5ea2c
Cortex A77 erratum 1791578 is a Cat B erratum present in r0p0, r1p0,
and r1p1 of the A77 processor core, it is still open.
SDEN can be found here:
https://documentation-service.arm.com/static/60a63a3c982fc7708ac1c8b1
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ib4b963144f880002de308def12744b982d3df868
BTI instructions are a part of the NOP space in earlier architecture
versions, so it's not inherently incorrect to enable BTI code
or instructions even if the target architecture does not support them.
This change reduces our reliance on architecture versions when checking
for features.
Change-Id: I79f884eec3d65978c61e72e4268021040fd6c96e
Signed-off-by: Chris Kay <chris.kay@arm.com>
* changes:
refactor(plat/nvidia): use SOC_ID defines
refactor(plat/mediatek): use SOC_ID defines
refactor(plat/arm): use SOC_ID defines
feat(plat/st): implement platform functions for SMCCC_ARCH_SOC_ID
refactor(plat/st): export functions to get SoC information
feat(smccc): add bit definition for SMCCC_ARCH_SOC_ID
The arm-gic.h was a concatenation of arm-gic.h and irq.h from Linux.
Just copy the 2 files here. They both have MIT license which is accepted
in TF-A.
With this alignment, a new macro is added (GIC_CPU_MASK_SIMPLE).
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ib45174f35f1796ebb7f34af861b59810cfb808b0
Use dedicated read function for boot partition
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: If75df7691fce0797205365736fc6e4e3429efdca
Added a public function to read blocks from a current boot partition.
switch between partitions has to respect eMMC partition switch timing.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I55b0c910314253e5647486609583fd290dadd30a
The UART code for the A3K platform assumes that UART parent clock rate
is always 25 MHz. This is incorrect, because the xtal clock can also run
at 40 MHz (this is board specific).
The frequency of the xtal clock is determined by a value on a strapping
pin during SOC reset. The code to determine this frequency is already in
A3K's comphy driver.
Move the get_ref_clk() function from the comphy driver to a separate
file and use it for UART parent clock rate determination.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
This patch renames the Matterhorn, Matterhorn ELP, and Klein CPUs to
Cortex A710, Cortex X2, and Cortex A510 respectively.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I056d3114210db71c2840a24562b51caf2546e195
Use the macros that are now defined in include/lib/smccc.h.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I688a76277b729672835d51fafb68d1d6205b6ae4
The definitions of SMCCC_ARCH_SOC_ID SoC version return bits are defined
in SMC Calling Convention [1]. Add the masks and shifts for JEP-106 bank
index, JEP-106 identification code, and Implementation defined SoC ID.
Add a macro to easily set JEP-106 fields.
[1] https://developer.arm.com/documentation/den0028/latest/
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Iecbd09f6de6728de89dc746d2d1981a5a97a8ab7
Add constants, structures and build definition for the
new standard SMCCC PCI conduit. These are documented
in DEN0115A.
https://developer.arm.com/documentation/den0115/latest
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: If667800a26b9ae88626e8d895674c9c2e8c09658
Added support for HW computed CRC using Arm ACLE intrinsics.
These are built-in intrinsics available for ARMv8.1-A, and
onwards.
These intrinsics are enabled via '-march=armv8-a+crc' compile
switch for ARMv8-A (supports CRC instructions optionally).
HW CRC support is enabled unconditionally in BL2 for all Arm
platforms.
HW CRC calculation is verified offline to ensure a similar
result as its respective ZLib utility function.
HW CRC calculation support will be used in the upcoming
firmware update patches.
Change-Id: Ia2ae801f62d2003e89a9c3e6d77469b5312614b3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Disable non-invasive debug of secure state for Juno
in release builds. This makes sure that PMU counts
only Non-secure events.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I0d1c3f96f3b4e48360a7211ae55851d65d291025
This patch adds setting MDCR_EL3.MCCD in 'el3_arch_init_common'
macro to disable cycle counting by PMCCNTR_EL0 in EL3 when
FEAT_PMUv3p7 is implemented. This fixes failing test
'Leak PMU CYCLE counter values from EL3 on PSCI suspend SMC'
on FVP models with 'has_v8_7_pmu_extension' parameter set to
1 or 2.
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change-Id: I2ad3ef501b31ee11306f76cb5a61032ecfd0fbda
Handle calls to the FFA_SPM_ID_GET interface. If FFA_SPM_ID_GET is
invoked from the non-secure physical FF-A instance, return the SPMC id
(defined in the SPMC manifest). If FFA_SPM_ID_GET is invoked from
the secure physical FF-A instance (e.g. the SPMC), return the SPMD id.
Change-Id: Id6d4e96b1da2510386d344e09c4553dba01227ec
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
* changes:
stm32mp1: enable PIE for BL32
stm32mp1: set BL sizes regardless of flags
Add PIE support for AARCH32
Avoid the use of linker *_SIZE__ macros
Added GPT parser support in BL2 for Arm platforms to get the entry
address and length of the FIP in the GPT image.
Also, increased BL2 maximum size for FVP platform to successfully
compile ROM-enabled build with this change.
Verified this change using a patch:
https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/9654
Change-Id: Ie8026db054966653b739a82d9ba106d283f534d0
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
NOTE: Breaking change to the way UUIDs are stored in the DT
Currently, UUIDs are stored in the device tree as
sequences of 4 integers. There is a mismatch in endianness
between the way UUIDs are represented in memory and the way
they are parsed from the device tree. As a result, we must either
store the UUIDs in little-endian format in the DT (which means
that they do not match up with their string representations)
or perform endianness conversion after parsing them.
Currently, TF-A chooses the second option, with unwieldy
endianness-conversion taking place after reading a UUID.
To fix this problem, and to make it convenient to copy and
paste UUIDs from other tools, change to store UUIDs in string
format, using a new wrapper function to parse them from the
device tree.
Change-Id: I38bd63c907be14e412f03ef0aab9dcabfba0eaa0
Signed-off-by: David Horstmann <david.horstmann@arm.com>
TF-A does not have the capability to read UUIDs in string form
from the device tree. This capability is useful for readability,
so add a wrapper function, fdtw_read_uuid() to parse UUIDs from
the DT.
This function should parse a string of the form:
"aabbccdd-eeff-4099-8877-665544332211"
to the byte sequence in memory:
[aa bb cc dd ee ff 40 99 88 77 66 55 44 33 22 11]
Change-Id: I99a92fbeb40f4f4713f3458b36cb3863354d2bdf
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Replaced PLAT_ARM_FIP_BASE and PLAT_ARM_FIP_MAX_SIZE macro with a
generic name PLAT_ARM_FLASH_IMAGE_BASE and PLAT_ARM_FLASH_IMAGE_MAX_SIZE
so that these macros can be reused in the subsequent GPT based support
changes.
Change-Id: I88fdbd53e1966578af4f1e8e9d5fef42c27b1173
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch fixes static checks errors reported for missing copyright in
`include/dt-bindings/interrupt-controller/arm-gic.h` and the include
order of header files in `.dts` and `.dtsi` files.
Change-Id: I2baaf2719fd2c84cbcc08a8f0c4440a17a9f24f6
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Chris Kay <chris.kay@arm.com>
André Przywara
Manish Pandey
Joanna Farley
Daniel Boulby
Arunachalam Ganapathy
Samuel Holland
bipin.ravi
johpow01
Manish V Badarkhe
Olivier Deprez
Max Shvetsov
Mark Dykes
Chris Kay
Yann Gautier
Madhukar Pappireddy
Vyacheslav Yurkov
Pali Rohár
Jeremy Linton
Zelalem
Alexei Fedorov
Daniel Boulby
David Horstmann