The header must now include by default at least an extra padding
header, increasing the size of the header to 512 bytes (0x200).
This header will be placed at the end of SRAM3 by BootROM, letting
the whole SYSRAM to TF-A.
The boot context is now placed in SRAM2, hence this memory has to be
mapped in BL2 MMU. This mapping is done for all SRAMs in a 2MB area.
Change-Id: I50fcd43ecd0ba2076292b057566efe6809b9971a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the new part numbers and adapt the functions that use them.
There is no package number in OTP as they all share the same GPIO
banks.
This part is then stubbed for STM32MP13.
Change-Id: I13414326b140119aece662bf8d82b387dece0dcc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The backup register used on STM32MP15 to save the boot interface for
the next boot stage was 20. It is now saved in backup register 30
on STM32MP13.
Change-Id: Ibd051ff2eca7202184fa428ed57ecd4ae7388bd8
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP13 is a single Cortex-A7 CPU, always return true in
stm32mp_is_single_core() function.
Change-Id: Icf36eaa887bdf314137eda07c5751cea8c950143
Signed-off-by: Yann Gautier <yann.gautier@st.com>
* GPIO: On STM32MP13, there are no banks GPIOJ, GPIOK and GPIOZ.
* STM32MP13 is a single Cortex-A7 CPU: remove reset from MPU1
and reset from MCU traces
* There is no MCU on STM32MP13. Put MCU security management
under STM32MP15 flag.
* The authentication feature is not supported yet on STM32MP13,
put the code under SPM32MP15 flag.
* On STM32MP13, the monotonic counter is managed in ROM code, keep
the monotonic counter update just for STM32MP15.
* SYSCFG: put registers not present on STM32MP13 under STM32MP15
flag, as the code that manages them.
* PMIC: use ldo3 during DDR configuration only for STM32MP15
* Reset UART pins on USB boot is no more required.
Change-Id: Iceba59484a9bb02828fe7e99f3ecafe69c837bc7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
tamp_bkpr() returns a register address. So use uintptr_t instead of
uin32_t.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Change-Id: I5eddfa525465313dadfec18d128248a968ba74e2
Avoid the use of return inside switch/case in stm32mp_is_single_core().
Although this MISRA rulre might not be enforced, we align on what is done
for stm32mp_is_auth_supported().
Change-Id: I00a5ec1b18c55b4254af00c9c5cf5a4dce104175
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP15xA and STM32MP15xD chip part numbers don't
support the secure boot.
All functions linked to secure boot must not be used
and signed binaries are not allowed on such chip.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I5b85f322f5eb3b64415e1819bd00fb2c99f20695
Use dt_find_otp_name() to retrieve platform OTP information
from device tree, directly or through stm32_get_otp_index() and
stm32_get_otp_value() platform services.
String definitions replace hard-coded values, they are used to call
this new function.
Change-Id: I81213e4a9ad08fddadc2c97b064ae057a4c79561
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Rename driver file to BSEC2.
Split header file in IP and feature parts.
Add functions to access BSEC scratch register.
Several corrections and improvements.
Probe the driver earlier, especially to check debug features.
Change-Id: I1981536398d598d67a19d2d7766dacc18de72ec1
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
With the FWU Multi Bank update feature, the platform can boot from one
of multiple banks(partitions). Pass the value of bank from which the
platform has booted as boot index to the Update Agent. The Update
Agent will match this boot index value against the active_index field
in the metadata, and update the metadata if there is a mismatch.
Fow now, the mechanism to pass the boot index is platform specific. On
the STM32MP1 platform, the boot index value is passed through a
memorey mapped TAMP register on the SoC.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I0aa665ff9c1db95be8ae19ed8de6d866587d6850
Only NAND memory map area can be of interest for BL2 in the
DEVICE2 area. Map DEVICE2 under STM32MP_RAW_NAND flag.
Change-Id: I7e3b39579e4a2525b25cb1987d6ec38038d0de2b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Warnings about header files include order were triggered by CI.
Correct the include order to mathc CI requirements.
Change-Id: Iaca959add924e0e1fa2e56fab2348f0ee36e5fa7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Protect the UART instance used for serial boot
with UART used for console.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ieee1557b34e7baa81594c3fbf0513191737027bf
Add function stm32_get_boot_interface to get the current boot interface
from information saved in the TAMP register.
Change-Id: I23af43c68eeaebe4c45920a57d739117aea3fbb1
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The function stm32_save_boot_interface()is moved to stm32mp1_private.c
file. The files stm32mp1_context.{c,h} are removed.
As return is always 0, change the function to return void.
Call it earlier, to be able to use it when configuring console.
Change-Id: I8986e1257dc8e8708eab044a51ea1f2426b16597
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Those pins are configured by ROM code, for serial boot use cases.
Their configs are reset if the boot is done on UART, but not on USB.
This should then be done in TF-A. This has to be done after clock
init, and before console is configured.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I29a9694e25fcf1665360dd71f73937f769c43b52
Add set_gpio_reset_cfg() to set a pin in its reset configuration:
analog, no-pull, speed low, and its secure configuration, thanks to
stm32_gpio_is_secure_at_reset().
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7b73c3636859f97fcc57f81cf68b42efc727922e
Handle boot from UART with STM32CubeProgammer based on mmap io
for STM32MP15.
Depends-On: Iba84e8dfd67b9f30416efb0f6778e48ba1f75dad
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ibd719dd46a11da78633728675ef6639635b6cf67
Three functions are exported to get SoC version, SoC device ID, and SoC
name. Those functions are based on reworked existing static functions.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I1f3949062bb488286a9e7a38ffcd1457953dac56
The board information values, read in an OTP are never negative,
%u is then used instead of %d.
Change-Id: I3bc22401fb4d54666ddf56411f75b79aca738492
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Update the board info with the new coding including the finished good
variant:
Board: MBxxxx Var<CPN>.<FG> Rev.<Rev>-<BOM>
The OTP 59 coding is:
bit [31:16] (hex) => MBxxxx
bit [15:12] (dec) => Variant CPN (1....15)
bit [11:8] (dec) => Revision board (index with A = 1, Z = 26)
bit [7:4] (dec) => Variant FG : finished good (NEW)
bit [3:0] (dec) => BOM (01, .... 255)
Change-Id: I4fbc0c84596419d1bc30d166311444ece1d9123f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2b702698d6be93da5ac86da1cbc98b3838315a5a
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Update to support new part numbers.
Add new STM32 MPUs Part = STM32MP151F, STM32MP153F, STM32MP157F,
STM32MP151D, STM32MP153D, STM32MP157D
The STM32MP1 series is available in 3 different lines which are pin-to-pin
compatible:
- STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz,
3D GPU, DSI display interface and CAN FD
- STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz
and CAN FD
- STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz
Each line comes with a security option (cryptography & secure boot)
& a Cortex-A frequency option :
- A Basic + Cortex-A7 @ 650 MHz
- C Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz
- D Basic + Cortex-A7 @ 800 MHz
- F Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz
Remove useless variable in stm32mp_is_single_core().
Change-Id: Id30c836af986c6340c91efa8a7ae9480a2827089
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add a new revision of STM32MP15x CPU (Rev.Z).
Change-Id: I227dd6d9b3fcc43270015cfb21f60aeb0a8ab658
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
SCMI shared memory is used to exchange message payloads between
secure SCMI services and non-secure SCMI agents. It is mapped
uncached (device) mainly to conform to existing support in
the Linux kernel. Note that executive messages are mostly short
(few 32bit words) hence not using cache will not penalize much
performances.
Platform stm32mp1 shall configure ETZPC to harden properly the
secure and non-secure areas of the SYSRAM address space, that before
CPU accesses the shared memory when mapped non-secure.
This change defines STM32MP_SEC_SYSRAM_BASE/STM32MP_SEC_SYSRAM_SIZE and
STM32MP_NS_SYSRAM_BASE/STM32MP_NS_SYSRAM_SIZE.
Change-Id: I71ff02a359b9668ae1c5a71b5f102cf3d310f289
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
New helper functions to get GPIO banks configuration from the FDT.
stm32_get_gpio_bank_pinctrl_node() allows stm32mp platforms to
differentiate specific GPIO banks when these are defined with a specific
path in the FDT.
fdt_get_gpio_bank_pin_count() returns the number of pins in a GPIO bank
as it depends on the SoC variant.
Change-Id: I4481774152b3c6bf35bf986f58e357c2f9c19176
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Relation between GPIO banks and their base address and offset address
if platform dependent. This change moves helper functions
stm32_get_gpio_bank_base() and stm32_get_gpio_bank_offset() from
plat/st/common to plat/st/stm32mp1/.
Change-Id: Id3d03e585746aa5509c6fab7d88183a92d561e3f
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
This function gets the DDR size from DT, and withdraws (if defined) the
sizes of secure DDR and shared memory areas.
This function also checks DT values fits the default DDR range.
This non-secure memory is available for BL33 and non-secure OS.
Change-Id: I162ae5e990a0f9b6b7d07e539de029f1d61a391b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This BSEC service is a platform specific service. Implementation
moved to the platform part.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I1f70ed48a446860498ed111acce01187568538c9
Among the variants of STM32MP, the STM32MP151 is a single Cortex-A7 chip.
A function is added to check the part number of the SoC.
If it corresponds to STM32MP151A or STM32MP151C, then the chip has a single
Cortex-A7.
Change-Id: Icac2015c5d03ce0bcb8e99bbaf1ec8ada34be49c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
On STMicroelectronics boards, the board information is stored in OTP.
This OTP is described in device tree, in BSEC board_id node.
Change-Id: Ieccbdcb048343680faac8dc577b75c67ac106f5b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
This information is located in DBGMCU registers.
Change-Id: I480aa046fed9992e3d9665b1f0520bc4b6cfdf30
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Introduce driver for STM32 IWDG peripheral (Independent Watchdog).
It is configured according to device tree content and should be enabled
from there.
The watchdog is not started by default. It can be started after an HW
reset if the dedicated OTP is fused.
The watchdog also needs to be frozen if a debugger is attached.
This is done by configuring the correct bits in DBGMCU.
This configuration is allowed by checking BSEC properties.
An increase of BL2 size is also required when adding this new code.
Change-Id: Ide7535d717885ce2f9c387cf17afd8b5607f3e7f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
GPIOx clocks are specific to each STM32MP platforms.
This change moves function stm32_get_gpio_bank_clock() from stm32mp
common source files to platform private stm32mp1_private.c source file.
Change-Id: I9616c0d3fe4d10af715d6f2d1550c13ab62c829a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions
that can be used in drivers shared by different platforms.
Change-Id: I2295c44f5b1edac7e80a93c0e8dfd671b36e88e7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Some parts of code could be shared with platform derivatives,
or new platforms.
A new folder plat/st/common is created to put common parts.
stm32mp_common.h is a common API aggregate.
Remove some casts where applicable.
Fix some types where applicable.
Remove also some platform includes that are already in stm32mp1_def.h.
Change-Id: I46d763c8d9e15732d1ee7383207fd58206d7f583
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Yann Gautier
Nicolas Toromanoff
Lionel Debieve
Nicolas Le Bayon
Sughosh Ganu
Yann Gautier
Patrick Delaunay
Patrick Delaunay
Etienne Carriere