This patch adds the necessary files to support
the SolidRun CN913X CEx7 Evaluation Board.
Because the DRAM connectivity and SerDes settings
is shared with the CN913X DB - reuse relevant
board-specific files.
Change-Id: I75a4554a4373953ca3fdf3b04c4a29c2c4f8ea80
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
The common makefile used by every a8k/cn913x platform
(a8k_common.mk) assumed default paths in PLAT_INCLUDES,
BLE/BL31_PORTING_SOURCES. Allow overriding those
variables, in order to avoid code duplication.
It can be helpful in case using multiple board variants
or sharing common settings between different platforms.
Change-Id: Idce603e44ed04d99fb1e3e11a2bb395d552e2bf7
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
* changes:
feat(plat/allwinner): add R329 support
refactor(plat/allwinner): allow custom BL31 offset
refactor(plat/allwinner): allow new AA64nAA32 position
fix(plat/allwinner): delay after enabling CPU power
Allwinner R329 is a new dual-core Corte-A53 SoC. Add basical TF-A
support for it, to provide a PSCI implementation containing CPU
boot/shutdown and SoC reset.
Change-Id: I0fa37ee9b4a8e0e1137bf7cf7d614b6ca9624bfe
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Not all Allwinner SoCs have the same arrangement to SRAM A2.
Allow to specify a offset at which BL31 will stay in SRAM A2.
Change-Id: I574140ffd704a796fae0a5c2d0976e85c7fcbdf9
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
In newer Allwiner SoCs, the AA64nAA32 wires are mapped to a new register
called "General Control Register0" in the manual rather than the
"Cluster 0 Control Register0" in older SoCs.
Now the position of AA64nAA32 (reg and bit offset) is defined in a few
macros instead assumed to be at bit offset 24 of
SUNXI_CPUCFG_CLS_CTRL_REG0.
Change-Id: I933d00b9a914bf7103e3a9dadbc6d7be1a409668
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Adds a 1us delay after enabling power to a CPU core, to prevent
inrush-caused CPU crash before it's up.
Change-Id: I8f4c1b0dc0d1d976b31ddc30efe7a77a1619b1b3
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Add support for runtime feature configuration which are running on the
firmware. Add new IOCTL IDs like IOCTL_SET_FEATURE_CONFIG and
IOCTL_GET_FEATURE_CONFIG for configuring the features.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I976aef15932783a25396b2adeb4c8f140cc87e79
Sync IOCTL IDs in order to avoid conflict with other components like,
Linux and firmware. Hence assigning value to IDs to make it more
specific.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I11ae679fbd0a953290306b62d661cc142f50dc28
after this commit: If15cf3b9d3e2e7876c40ce888f22e887893fe696
plat/qemu/common/qemu_pm.c:116: (entrypoint < (NS_DRAM0_BASE + NS_DRAM0_SIZE)))
the above line (NS_DRAM0_BASE + NS_DRAM0_SIZE) = 0x100000000, which will
overflow 32bit and cause ERROR
SO add ULL to fix it
tested on compiler:
gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))
Signed-off-by: Darren Liang <lwp513@qq.com>
Change-Id: I1d769b0803142d37bd2968d765ab04a9c7c5c21a
This patch adds the basic CPU library code to support the Demeter
CPU. This CPU is based on the Makalu-ELP core so that CPU lib code
was adapted to create this patch.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ib5740b748008a72788c557f0654d8d5e9ec0bb7f
As done recently for plat/tc0 in b5863cab9, enable AMU explicitly.
This is necessary as the recent changes that enable SVE for the secure
world disable AMU by default in the CPTR_EL3 reset value.
Change-Id: Ie3abf1dee8a4e1c8c39f934da8e32d67891f5f09
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
Now that the DDR is mapped secured, the security settings (TZC400
firewall) have to be applied at the end of BL2 for the OP-TEE case.
This is required to avoid checskum computation error on U-Boot binary,
for which MMU and TZC400 would not be aligned.
Change-Id: I4a364f7117960e8fae1b579f341b9f140b766ea6
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The Tegra132 platforms have reached their end of life and are
no longer used in the field. Internally and externally, all
known programs have removed support for this legacy platform.
This change removes this platform from the Tegra tree as a result.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I72edb689293e23b63290cdcaef60468b90687a5a
Most DTBs used on the RaspberryPi contain a FDT /memreserve/ region,
that covers the original secondaries' spin table.
We need to reserve more memory than described there, to cover the whole
of the TF-A image, so we add a /reserved-memory node to the DTB.
However having the same memory region described by both methods upsets
the Linux kernel and U-Boot, so we have to make sure there is only one
instance describing this reserved memory.
Keep our currently used /reserved-memory node, since it's more capable
(it allows to mark the region as secure memory). Add some code to drop
the original /memreserve/ region, since we don't need this anymore,
because we take the secondaries out of their original spin loop.
We explicitly check for the currently used size of 4KB for this region,
to be alerted by any changes to this region in the upstream DTB.
Change-Id: Ia3105560deb3f939e026f6ed715a9bbe68b56230
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Put default ea handler implementation into function plat_default_ea_handler()
which just print verbose information and panic, so it can be called also
from overwritten / weak function plat_ea_handler() implementation.
Replace every custom implementation of printing verbose error message of
external aborts in custom plat_ea_handler() functions by a common
implementation from plat_default_ea_handler() function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I15897f61b62b4c3c29351e693f51d4df381f3b98
* changes:
feat(plat/rcar3): emit RPC status to DT fragment if RPC unlocked
feat(plat/rcar3): add a DRAM size setting for M3N
feat(plat/rcar3): update IPL and Secure Monitor Rev.3.0.0
feat(plat/rcar3): add new board revision for Salvator-XS/H3ULCB
feat(drivers/rcar3): ddr: add function to judge a DDR rank
fix(drivers/rcar3): ddr: update DDR setting for H3, M3, M3N
fix(drivers/rcar3): i2c_dvfs: fix I2C operation
fix(drivers/rcar3): fix CPG registers redefinition
fix(drivers/rcar3): emmc: remove CPG_CPGWPR redefinition
fix(plat/rcar3): generate two memory nodes for larger than 2 GiB channel 0
refactor(plat/rcar3): factor out DT memory node generation
feat(plat/rcar3): add optional support for gzip-compressed BL33
* changes:
feat(io_mtd): offset management for FIP usage
feat(nand): count bad blocks before a given offset
feat(plat/st): add helper to save boot interface
fix(plat/st): improve DDR get size function
refactor(plat/st): map DDR secure at boot
refactor(plat/st): rework TZC400 configuration
This commit activates the stack protector feature for the diphda
platform.
Change-Id: Ib16b74871c62b67e593a76ecc12cd3634d212614
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
This renames tc0 platform folder and files to tc, and introduces
TARGET_PLATFORM variable to account for the differences between
TC0 and TC1.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I5b4a83f3453afd12542267091b3edab4c139c5cd
This reverts commit 4d9b9b2352.
Timeout in IPI ack was added for functional safety reason.
Functional safety is not criteria for ATF. However, this
creates issues for APIs that take long or non-deterministic
duration like FPGA load. So revert this patch for now to fix
FPGA loading issue. Need to add support for non-blocking API
for FPGA loading with callback when API completes.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I940e798f1e2f7d0dfca1da5caaf8b94036d440c6
DFD (Design for Debug) is a debugging tool, which scans
flip-flops and dumps to internal RAM on the WDT reset.
After system reboots, those values could be showed for
debugging.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I9c7af9a4f75216ed2c6b44458d121a352bef4b95
Fixed the build error by removing the local definition of 'efi_guid'
structure in 'sgi_ras.c' file as this structure definition is already
populated in 'sgi_ras.c' file via 'uuid.h' header.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I57687336863f2a0761c09b6c1aa00b4aa82a6a12
Bump the required FF-A version in framework and manifests to v1.1 as
upstream feature development goes.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I89b2bd3828a13fc4344ccd53bc3ac9c0c22ab29f
Renamed hw_crc32 to tf_crc32 to make the file and function
name more generic so that the same name can be used in upcoming
software CRC32 implementation.
Change-Id: Idff8f70c50ca700a4328a27b49d5e1f14d2095eb
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added firmware update support in Arm platforms by using
FWU platform hooks and compiling FWU driver in BL2
component.
Change-Id: I71af06c09d95c2c58e3fd766c4a61c5652637151
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
External Abort may happen also during printing of some messages by
U-Boot or kernel. So print newline before fatal abort error message.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic7579b605e695c2e4cb9a4f5cdc2d0b3e5083e49
These files are needed during boot, but they were missing
for semihosting.
With this patch, the list of files is complete enough to
boot on ATF platform via semihosting.
Change-Id: I2f0ca25983a6e18096f040780776f19f8040ea79
Signed-off-by: stsp@users.sourceforge.net
The rpi4 has a single nonstandard ECAM. It is broken
into two pieces, the root port registers, and a window
to a single device's config space which can be moved
between devices. Now that we have widened the page
tables/MMIO window, we can create a read/write acces
functions that are called by the SMCCC/PCI API.
As an example platform, the rpi4 single device ECAM
region quirk is pretty straightforward. The assumption
here is that a lower level (uefi) has configured and
initialized the PCI root to match the values we are
using here.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: Ie1ffa8fe9aa1d3c62e6aa84746a949c1009162e0
Now that we have adjusted the address map, added the
SMC conduit code, and the RPi4 PCI callbacks, lets
add the flags to enable everything in the build.
By default this service is disabled because the
expectation is that its only useful in a UEFI+ACPI
environment.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: I2a3cac6d63ba8119d3b711db121185816b89f8a2
Marcin Wojtas
André Przywara
Joanna Farley
Icenowy Zheng
Madhukar Pappireddy
Ronak Jain
lwpDarren
johpow01
Tom Cosgrove
Yann Gautier
Varun Wadekar
Pali Rohár
Manish Pandey
Abdellatif El Khlifi
Usama Arif
Olivier Deprez
Venkatesh Yadav Abbarapu
Rex-BC Chen
Manish V Badarkhe
J-Alves
Stas Sergeev
Jeremy Linton