This driver is for the STMicroelectronics sdmmc2 IP
which is in STM32MP1 SoC.
It uses the MMC framework, and can address either eMMC or SD-card.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The "Secure" prefix (S-ELx) is valid only for S-EL0 and S-EL1 but is
meaningless for EL3, since EL3 is always secure. Hence, the "S" prefix
has been removed from wherever it was used as "S-EL3".
Change-Id: Icdeac9506d763f9f83d7297c7113aec7b85e9dbe
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
In the function, bl1_early_platform_setup in the file
plat/arm/css/sgm/sgm_bl1_setup.c:
plat_config_init();
arm_bl1_early_platform_setup();
The debug messages logged by plat_config_init() are lost because
the console is initialized in the function
arm_bl1_early_platform_setup()
To see the logs of plat_config_init, this fix re-orders above calls
so that the console is initialized before call to plat_config_init.
Change-Id: I2e98f1f67c591cca24e28905acd0838ea3697a7c
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
This way it can be reused by other platforms if needed.
Note that this driver is designed to work with the Versatile Express NOR
flash of Juno and FVP. In said platforms, the memory is organized as an
interleaved memory of two chips with a 16 bit word.
Any platform that wishes to reuse it with a different configuration will
need to modify the driver so that it is more generic.
Change-Id: Ic721758425864e0cf42b7b9b04bf0d9513b6022e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This lets any future CSS platforms to use RESET_TO_BL31 flag.
Change-Id: I32a90fce43cb0c6f4d33589653a0fd6a7ecc9577
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
Before switching to new API the scp_bl2 handler was invoked from
bl2/bl2_image_load.c which was removed. Invoke the platform specific
scp_bl2 handler in analogy to ARM and HiSilicon.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
The BLE is the pre-TF-A boot stage required by Marvell Armada
BootROM for bringing up DRAM and allow the boot image copy to it.
Since this is not a standard boot level and only uses the TF-A
as a build environment, it was introduced out of source tree.
However it turns out that such remote location introduces additional
complexity to the upstream TF-A build process.
In order to simplify the build environment the BLE source folder
is relocated from the external repository to A8K platform directory.
The build documentation is updated accordingly.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Map the initialization code for BL31 to overlap with the memory
required for the secondary cores stack. Once BL31 has been
initialized the memory can be remapped to RW data so that it can
be used for secondary cores stacks. By moving code from .text to
.text.init the size of the BL31 image is decreased by a page.
Split arm_common.ld.S into two linker scripts, one for tzc_dram
(arm_tzc_dram.ld.S) and one for reclaiming initialization code
(arm_reclaim_init.ld.S) so that platforms can chose which memory
regions they wish to include.
Change-Id: I648e88f3eda1aa71765744cf34343ecda9320b32
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Mark the GICv3, CCI and CCN code only used in Bl31 initialization
with __init to be reclaimed once no longer needed.
Change-Id: I3d77f36758450d9d1d87ecc60bc1c63fe4082667
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Mark the initialization functions found in the BL31 boot sequence
as __init so they can be reclaimed when no longer needed.
Change-Id: I687a89346419c7710ef5097feaa325d83c527697
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Remove ARM_MAP_BL_ROMLIB memory region macro as it is now split
into two regions for code and data
Change-Id: Ic17b5b584933c196db29fe83051d7e0a8e92911c
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
- Fix build issue
- Add initial memory parameters descriptors for BL2
- Migrate to image load V2
Basic build and run test passed on MacchiatoBin board.
Need to fix the service CPU (CM3) image load procesure and test
OPTEE functionality, which probably will require additional work.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
This option makes it hard to optimize the memory definitions of all Arm
platforms because any change in the common defines must work in all of
them. The best thing to do is to remove it and move the definition to
each platform's header.
FVP, SGI and SGM were using the definitions in board_arm_def.h. The
definitions have been copied to each platform's platform_def.h. Juno
was already using the ones in platform_def.h, so there have been no
changes.
Change-Id: I9aecd11bbc72a3d0d7aad1ef9934d8df21dcfaf2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to new GIC interfaces.
- Migrate to bl31_early_platform_setup2().
- Use bl31_warm_entrypoint() instead of psci_entrypoint().
- Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE.
- Update Makefile paths.
- Remove references to removed build options.
- Use private definition of bl31_params_t.
Change-Id: I860341594b5c868b2fcaa59d23957ee718472ef1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to bl31_early_platform_setup2().
- Remove references to removed build options.
- Replace zeromem16() by zeromem().
- Use private definition of bl31_params_t.
This is an incomplete migration, the platform doesn't currently compile.
Change-Id: I67fbf2206678be80c3a16692024221a131cec42f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- mt6795: Migrate to new GIC interfaces.
- Remove support for PSCI platform compatibility layer.
- Migrate to bl31_early_platform_setup2().
- Migrate from cm_init_context() to cm_init_my_context().
- Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE.
- Update Makefile paths.
- Use private definition of bl31_params_t.
This is an incomplete migration, mt6795 doesn't currently compile.
Change-Id: Icf9307637066cd6f2166524715e4f117f5ce2350
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to bl2_early_platform_setup2().
- Remove references to removed build options.
- Use private definition of bl31_params_t.
This is an incomplete migration, the platform doesn't currently compile.
Change-Id: I1ae477b1f2489f49b651528050fdf06e4a55e425
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to new GIC interfaces.
- Remove references to removed build options.
Change-Id: I6f90a33d5438a9d7b71be3f93e8d9da278c8c6e6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to new GIC interfaces.
- Migrate to bl31_early_platform_setup2().
- Remove references to removed build options.
Change-Id: Ia7c63f75325ea4b41e32a9de3f01b0007d0ae210
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to bl31_early_platform_setup2().
- Remove references to removed build options.
Change-Id: Ie9f149e3fdec935f9329402ed3dd8e1c00b8832c
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Remove references to removed build options.
- Remove support for legacy GIC driver.
- Remove support for LOAD_IMAGE_V2=0.
Change-Id: I72f8c05620bdf4a682765e6e53e2c04ca749a3d5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Yann Gautier
Soby Mathew
Sathees Balya
John Tsichritzis
Girish Pathak
Antonio Nino Diaz
Deepak Pandey
Grzegorz Jaszczyk
Dimitris Papastamos
Konstantin Porotchkin
Daniel Boulby