Add new option for serial and default clock setup.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I0ca7ad51637cdaa6bb891f22c53595d20da7236a
ATF can't fit in current OCM size when the DEBUG is enabled, so
increase the OCM size to use 128Kb.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I2ebfd1f2e9db9c0b28770aea7f8fbf1a8a15787a
The IOU switch clock will be set by PLM during boot so there is no need to
set here and hence this patch removes it.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I1512708411eb07a07c1a8fbd66575efee975431a
This patch modifies cpu clock for Xilinx Versal virtual
platform in order to keep same as used by QEMU.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I169d082462d7ce94a82c62966ab9eb122c5a3fee
This patch adds EEMI support for PM_GET_OPERATING_CHARACTERISTIC api id. This
interface obtains operating characteristic of a device from PMC firmware. The
'power', 'temperature', and 'latency' characteristic are the options that are
supported.
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: If30959ba6a3a778a17df2a4281c2c09832cf7e92
Add support for Get_ChipID API in Versal which calls corresponding
LibPM API.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Acked-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I25c4b301721d7989d982ac376c59195c55564022
This patch adds support for load pdi api to enable loading
pdi from linux.
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I48549e276e1f7b9be45a0bebf559f73bd09d5f69
Add API to check availability of given API in ATF
as well as platform management controller and returns
the supported version number.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I608b38f60b36c4d105b7a205ecb8b02de0c00f3c
Add support to set wakeup source for APU while suspending.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I4809fd83a710def8144fdad74990c45e62b8fdf3
Add GET_CALLBACK_DATA function to get IPI callback
data in Linux during init suspend callback.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ieb60e561b5f656611f0702c43ba6a4296a012651
Add following APIs in plat_psci to support system shutdown & reset:
- versal_system_off
- versal_system_reset
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ia2c1a19ded18984b393e1fdee760bf48b45e9902
Add following APIs in plat_psci to support suspend resume:
- versal_pwr_domain_off
- versal_pwr_domain_suspend
- versal_pwr_domain_suspend_finish
- versal_validate_power_state
- versal_get_sys_suspend_power_state
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ife908a45f32e2037c9c19e13211a8e4b373b8342
Add PMC ops for power domain ON and remove no_pmc ops.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Id4308dfe124b60a751765beb3397d1b0071f14fc
Implement set wakeup source API to pass SMC
call for set wakeup source to PLM (Platform Loader
and Manager).
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I654ce07235c0fc7dfcb81bf98820153255f61537
Implement client wakeup API for versal.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I31b1b362fe645a82f89ce2d698ee71eb00cf15dc
Add PM_QUERY_DATA API to pass query data
EEMI call from Linux to PLM .
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I18735b72ab9cb62fb6cbc7582e77de6cb57f99b0
PM_INIT_FINALIZE is not required for versal. To use Linux
Zynqmp PM driver for versal, handle PM_INIT_FINALIZE API
in ATF for versal by always returning SUCCESS.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I6fe5445d78e713d70282ac8931ff8b17c96b2a14
PM_GET_TRUSTZONE_VERSION API is required to use zynqmp-firmware
driver for versal. Add support of PM_GET_TRUSTZONE_VERSION API
for versal.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ie1c859890096024cc8be67386e3fd0f5f8a4385f
As IPI mailbox service is common to both ZynqMP and Versal,
move it to xilinx/common.
Signed-off-by: Wendy Liang <wendy.liang@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I1a7008ccf7930829621147922d2c6d8d46df5502
Add PM IOCTL EEMI.
Below PLL related IOCTLs are not available in versal PLM.
* IOCTL_SET_PLL_FRAC_MODE
* IOCTL_GET_PLL_FRAC_MODE
* IOCTL_SET_PLL_FRAC_DATA
* IOCTL_SET_PLL_FRAC_DATA
PLM has new EEMI APIs for PLL related operations.
Call them instead of passing IOCTL API to PLM.
For other IOCTL, ATF just pass through IOCTL
request to PLM (Platform Loader and Manager).
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I96f8da46a4d3965c9291b7b2da96056408137839
Add power down/restart related below API
- Force power down
- System shutdown
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Icd4a922923b1fd50eca1f5361f1e604aedcdb529
Add SMC handler for EEMI API calls coming from EL1/EL2.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: If0ef2a1f2cfc2747be6b91828371bcbec56b1e15
Implement below pin control related APIs:
- Request pin
- Release pin
- Set pin function
- Get pin function
- Set pin parameter value
- Get pin parameter value
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ib805cc8c936b63206d44bf1f7bebd0f03f7b3c01
Add support for EEMI API get_api_verion.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ic1ef90a194ae6164994a7fc5d8ff0b7b192636fe
Port ZynqMP PM services for versal to send PM APIs to PMC
using IPI.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Wendy Liang <wendy.liang@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I27a52faf27f1a2919213498276a6885a177cb6da
Move versal_def.h to platform specific include directory.
Also, update source file to include header file from updated
path of versal_def.h
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I313592a17552843b9cc7048f31bcaaefa40ffd91
Move versal_private.h to platform specific include directory.
Also, rename it to plat_private.h instead of having platform
name. So, it can be used to common source files which needs
platform specific data.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I65eefbea7722ffa2760b992491c00eebef5bcef4
- Flag GICV2_G0_FOR_EL3 needs to be set for group interrupts
to be targeted to EL3.
- Raise SGI interrupts for individual CPU cores as GIC API
uses CPU num as parameter, not CPU mask.
- Flag WARMBOOT_ENABLE_DCACHE_EARLY needs to be set to enable
CPU interface mask work properly for all CPU cores which is
required when generating SGI.
- Call plat_ic_end_of_interrupt() from ttc_fiq_handler() to clear
GIC interrupt to avoid same interrupt again.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I71d4935b8d4688a3729c62753ca8a1a77cd92ae7
This patch adds support for CRC checksum for IPI data when the
macro ZYNQMP_IPI_CRC_CHECK is defined.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ic981f162666b3c1fffeb1b9fef3ee7714ecd889d
Add new QID to get maximum supported divisor by clock.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I35fc92457e522f3f0614d983c21e55c2b0b8e80a
Existing implementation does not allow to change the value of the
DIV1 because DIV2 does not have SET_RATE_PARENT flag.
This causes DIV1 value to be fixed and only value of DIV2 will be
adjusted according to required clock rate.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ic6c4ca091bf0c5dc91ebddf86621c82c705dc87b
Linux expects custom flags in type flags. So move
custom flags to type flags instead of providing
them to clock core flags.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I668a8084d966815a9d9e86c2b18ecb5b18cb6b78
Add support to add extra custom type flags and provide
to caller in topology query.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Id9cc065dbadfed2291dd4f62674d7838da4cdf40
Add GET_CALLBACK_DATA function again as now Linux driver
supports both mailbox as well as ISR method.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ieb99d61976e1cb718fcd1021d9cf4958e7556c81
CLK_TOPSW_LSBUS is parent of WDT clock. Clock from invalid
clock list would not be registered to CCF framework and so
cannot be used as parent of other clocks.
WDT clock has default parent as CLK_TOPSW_LSBUS(APB clock).
If CLK_TOPSW_LSBUS is not registered, CCF would not recognize
that clock and hence rate of WDT clock would be calculated to
be 0 by CCF(as parent rate is considered 0).
So it is necessary to allow registration of CLK_TOPSW_LSBUS
clock.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Iceaba0f137784fc5fd666e66ffc4c143381c6ccc
This patch adds LPD WDT clock node to the pm_clock clocks structure list
so that LPD WDT can be used from Linux.
Also this patch removes the CLK_LPD_LSBUS from invalid clock list to
allow the registration of this clock to CCF framework as it is the
parent of LPD WDT.
Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Iea065aa8150eaba4bb4b42bc6be1fd4b7fe7b403
GEM-related clock models were incorrect and are fixed as follows
(documented below for GEM0, but the same holds for any GEM ID):
- CLK_GEM0_REF_UNGATED represents clock that has DIV0/1 divisors and
the multiplexer controllable in GEM0_REF_CTRL (CRL_APB). The ID of this
clock is newly introduced in this patch.
- CLK_GEM0_REF models the clock mux that selects the reference clock
for Tx, i.e. selects CLK_GEM0_REF_UNGATED or external Tx clock. This
mux is controllable via GEM_CLK_CTRL (IOU_SLCR), bit GEM0_REF_SRC_SEL.
Note that the routing of external clock to the mux is not modelled
and is assumed to be configured by the FSBL if required, and not
changeable at runtime. The ID of this clock is introduced in this patch.
- CLK_GEM0_TX models clock with only a gate that is controlled via
bit 25 in GEM0_REF_CTRL (CRL_APB). The parent of this clock is
CLK_GEM0_REF. The clock ID of CLK_GEM0_TX matches the previous ID
value of CLK_GEM0_REF. This is done in order to fix the clock models
and incorrect binding without requiring to change device-tree (binding
of clock IDs to GEM interface).
- CLK_GEM0_RX models clock that has only gate controlled via RX_CLKACT
bit (26) in GEM0_REF_CTRL (CRL_APB). Parent of this clock is sourced
from external RGMII PHY (via MIO or EMIO). We do not model the whole
clock path to the Rx gate, since this is configured by the FSBL and
never changed at runtime (and there is no mechanism to change the
path at runtime). The clock ID of CLK_GEM0_RX clock is equal to the
previous ID value of CLK_GEM0_TX clock. This is done because the TX/RX
were swapped in device tree, so by fixing the IDs this way there is no
need for device tree fix.
Rates of the external RX/TX clocks can be specified in device tree if
needed. Right now, that's not necessary because Tx clock is sourced
from an on-chip PLL (via CLK_GEM0_REF_UNGATED/CLK_GEM0_REF), whereas
the Rx clock is sourced from external reference and the driver never
attempts to get/get clock rate (only to enable it). If this changes in
future, ATF clock model doesn't need to be changed. Instead, the clock
rates for gem0_tx_ext and gem0_rx_ext have to be specified in device
tree.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <will.wong@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I6497d4309e92205c527bd81b3aa932f4474f5b79
This patch renames FPD WDT clock ID from CLK_WDT to CLK_FPD_WDT.
Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I4d00a59b1dc54920115a2da55e8a06347fe2231c
Correct the syscnt frequency for ZynqMP QEMU to 65Mhz.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ie0137feb9b7e24ed4e5d6cbf81c58ac77bb69214
Add support for zu48dr and zu49dr to the list of zynqmp devices. The
zu48dr and zu49dr are the new RFSoC silicons with id values of 0x7b
and 0x7e.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I2978f16bb663853951ef8059bf0327f909447f34
This patch adds new RFSoC device ZU39DR to zynqmp
devices list
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I35735da9e7d7facbde44323c49eac1b714e4909d
The SCU connects one to four Cortex-A5/Cortex-A9 processors
to the memory system through the AXI interfaces.
The SCU functions are to:
- maintain data cache coherency between the Cortex-A5/Cortex-A9
processors
- initiate L2 AXI memory accesses
- arbitrate between Cortex-A5/Cortex-A9 processors requesting
L2 accesses
- manage ACP accesses.
Snoop Control Unit will enable to snoop on other CPUs caches.
This is very important when it comes to synchronizing data between
CPUs. As an example, there is a high chance that data might be
cache'd and other CPUs can't see the change. In such cases,
if snoop control unit is enabled, data is synchoronized immediately
between CPUs and the changes are visible to other CPUs.
This driver provides functionality to enable SCU as well as enabling
user to know the following
- number of CPUs present
- is a particular CPU operating in SMP mode or AMP mode
- data cache size of a particular CPU
- does SCU has ACP port
- is L2CPRESENT
Change-Id: I0d977970154fa60df57caf449200d471f02312a0
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>