Sync IOCTL IDs in order to avoid conflict with other components like,
Linux and firmware. Hence assigning value to IDs to make it more
specific.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I11ae679fbd0a953290306b62d661cc142f50dc28
This reverts commit 4d9b9b2352.
Timeout in IPI ack was added for functional safety reason.
Functional safety is not criteria for ATF. However, this
creates issues for APIs that take long or non-deterministic
duration like FPGA load. So revert this patch for now to fix
FPGA loading issue. Need to add support for non-blocking API
for FPGA loading with callback when API completes.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I940e798f1e2f7d0dfca1da5caaf8b94036d440c6
This patch adds the option HARDEN_SLS_ALL that can be used to enable
the -mharden-sls=all, which mitigates the straight-line speculation
vulnerability. Enable this by adding the option HARDEN_SLS_ALL=1,
default this will be disabled.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I0d498d9e96903fcb879993ad491949f6f17769b2
All API calls except non-blocking should wait for
IPI response and read buffer to check return status
from firmware. Some of API calls are not reading
status from IPI payload data. Use sync method which
reads actual return status from IPI payload.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I6f568b85d0da639c264f507122e3015807d8423d
All API calls except non-blocking should wait for
IPI response and read buffer to check return status
from firmware. Some of API calls are not reading
status from IPI payload data. Use sync method which
reads actual return status from IPI payload.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I78f9c061a80cee6d524ade4ef124ca88ce1848cf
As there is constraint with the space for the release builds,
remove some of the legacy code.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5b8b16f34ed8e480f16ab1aeac80b85cdb391852
In case of TF-A running out of DDR there is a need to reserved
memory to let other SW know that none can't use this memory. HW
wise this region can be (and should be) also protected by
protection unit XMPU. This is the first step to add reserved
memory location to DT.
DT address corresponds with default address in U-Boot and also
default address in Xilinx BSPs.
Code is valid only when TF-A runs out of DDR. When it runs out
of OCM there is no need to reseve anything because OCM is hidden
to OS.
Change-Id: I01f230ced67207a159128cc11d11d36dd4590cab
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add basic SDEI support, implementing the software event 0 only for now.
This already allows hypervisors like Jailhouse to use SDEI for internal
signaling while passing the GICC through to the guest (see also IMX8).
With SDEI on, we overrun the SRAM and need to stay in DRAM. So keep SDEI
off by default.
Co-developed-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: Ic0d71b4ef0978c0a34393f4e3530ed1e24a39ca2
Add support for XCK26 silicon which is available on SOM board.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ic98213328702903af8a79f487a2868f3e6d60338
Use proper offset for IPI data based on offset for IPI0
channel.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I3070517944dd353c3733aa595df0da030127751a
Upon recieving the interrupt send an SGI.
The sgi number is communicated by linux.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Change-Id: Ib8f07ff7132ba5ac202b546914efb16d04820ed3
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Add support for the trapping the IPI in TF-A.
Register handler for the irq no 62 which is the IPI interrupt.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Change-Id: I9c04fdae7be3dda6a34a9b196274c0b5fdf39223
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Counter frequency for generic timer of Arm-A53 based Application
Processing Unit(APU) is not configuring in case if First Stage Boot
Loader(FSBL) does not initialize counter frequency. This happens
when FSBL is running from Arm-R5 based Real-time Processing Unit(RPU).
Because of that generic timer driver functionality is not working.
So configure counter frequency during initialization.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Icfccd59d7d2340fba25ebfb2ef6a813af4290896
Add support for CRC checksum for IPI data when the macro
IPI_CRC_CHECK is enabled.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I3c25c715885759076055c6505471339b5d6edcd5
Rename the macro ZYNQMP_IPI_CRC_CHECK to IPI_CRC_CHECK and
move the related defines to the common include.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I6d30b081ac607572a0b23e10ca8031bc90489e58
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I77994ce387caf0d695986df3d01d414a920978d0
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I62cfbb57ae7e454fbc91d1c54aafa6e99f9a35c8
BIT24 of IPI command header is used to determine if caller is
secure or non-secure.
Mark BIT24 of IPI command header as non-secure if SMC caller
is non-secure.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: Iec25af8f4b202093f58e858ee47cd9cd46890267
Versal is a72 based that's why there is no reason to build low level
assemble code for a53.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Iff9cf2582102d951825b87fd9af18e831ca717d6
Add support for ZU43DR, ZU46DR and ZU47DR to the list of zynqmp
devices. The ZU43DR, ZU46DR and ZU47DR RFSoC silicon id values are
0x7d, 0x78 and 0x7f.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I566f707116d83475de7c87a6004ca96bf7bccebe
Removing the custom crash implementation and use
plat/common/aarch64/crash_console_helpers.S.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I045d42eb62bcaf7d1e18fbe9ab9fb9470e800215
Some switch cases uses same operation. So, club switch cases
which uses same operation and remove duplicate code.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I260b474c0ff3f2ca102c32d4af2e4abba2b8f57c
Add ability to support PS and System reset after idling the APU,
by reading the restart scope from the PMU.
Signed-off-by: Will Wong <willw@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I23c01725d8ebb71ad34be02ab204411b93620702
ATF is not checking PM version. Add version check in such
a way that it is compatible with current and newer version
of PM.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Ia095d118121e6f75e8d320e87d5e2018068fa079
This patch fixes the non compliant code like missing braces for
conditional single statement bodies.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I95b410ae5950f85dc913c4448fcd0a97e0fd490c
Adding the EM specific smc handler for the EM-related requests.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I98122d49604a01a2f6bd1e509a5896ee68069dd0
This patch adds new api to access zynqmp efuse memory
Signed-off-by: VNSL Durga <vnsl.durga.challa@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I0971ab6549552a6f96412431388d19b822db00ab
This patch adds new zynqmp-pm api to provide read/write access to
CSU or PMU global registers.
Signed-off-by: Kalyani Akula <kalyania@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I4fd52eb732fc3e6a8bccd96cad7dc090b2161042
Functions are reimplemented to issue system-level pinctrl EEMI calls
to the PMU-FW rather than using MMIO read/write. Macros and functions
that appear to be unused after the change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I51f2285a79f202cb2ca9f031044002e16dd1e92f
Functions are reimplemented to issue system-level pinctrl EEMI calls
to the PMU-FW rather than using MMIO read/write. Macros and functions
that appear to be unused after the change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I21b8fda855aa69090b85d6aaf411e19560201cb5
The calls are just passed through to the PMU-FW. Before issuing
other pinctrl functions the pin should be successfully requested.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Ibce280edebedf779b3962009c274d0b3d928e0e4
In pm_query_data() function return type is stored in response so
there is no use of return type. Update return type of function
pm_query_data() from enum pm_ret_status to void. Similarly
update return type of pm_api_clock_get_name() and
pm_api_pinctrl_get_function_name() functions.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Id811926f0b4ebcc472480bb94f3b88109eb036cd
This patch disable the ITAPDLYENA bit for ITAP delay value zero.
As per IP design, it is recommended to disable the ITAPDLYENA bit
before auto-tuning.
Also disable OTAPDLYENA bit always as there is one issue in RTL
where SD0_OTAPDLYENA has been wrongly connected to both SD0 and SD1
controllers. Hence it is recommended to disable OTAPDLYENA bit always
for both the controllers.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Acked-by: Srinivas Goud <srinivas.goud@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Icf035cb63510ac7bec4e9d523a622f145eaf0989
This patch check for the DLL status before doing the DLL reset.
If DLL reset is already issued then skip the reset inside ATF
otherwise DLL reset will be issued.
By doing this way, all the following cases will be supported.
1. Patched ATF + Patched Linux base.
2. Older ATF + Patched Linux base.
3. Patched ATF + Older Linux base.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I53a0a27521330f1543275cc9cb44cd1dfc569c65
* changes:
plat: xilinx: versal: Add support of register notifier
plat: xilinx: versal: Add support to get clock rate value
plat: xilinx: versal: Add support of set max latency for the device
plat: versal: Add InitFinalize API call
xilinx: versal: Updated Response of QueryData API call
plat:xilinx:versal: Use defaults when PDI is without sw partitions
plat: xilinx: Mask unnecessary bytes of return error code
xilinx: versal: Skip store/restore of GIC during CPU idle
plat: versal: Update API list in feature check
xilinx: versal: Do not pass ACPU0 always in set_wakeup_source()
Current implementation doesn't support change of div1 value if clk
has 2 divisor because div1 clk is the parent of the div2 clk and div2
clk does not have SET_RATE_PARENT flag.
This causes div1 value to be fixed and only value of div2 will be
adjusted according to required clock rate.
Example:
Consider a case of nand_ref clock which has 2 divisor and 1 mux.
The frequency of mux clock is 1500MHz and default value of div1 and
div2 is 15 and 1 respectively. So the final clock will be of 100MHz.
When driver requests 80MHz for nand_ref clock, clock framework will
adjust the div2 value to 1 (setting div2 value 2 results final clock
to 50MHz which is more inaccurate compare to 100Mhz) which results
final clock to 100MHz.
Ideally the value of div1 and div2 should be updated to 19 and 1
respectively so that final clock goes to around 78MHz.
This patch fixes above problem by allowing change in div1 value.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Ibb98f6748d28653fdd1e59bf433b6a37ce9c1a58
This patches copies only the valid part of string and
avoids filling junk at the end.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: If23772f31f9cf7f5042e8bfc474fbfe77dcd90e7
Add support of register notifier.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I41ef4c63abcc9aee552790b843adb25a5fd0c23e
Add support to get clock's rate value.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I3ed881053ef323b2ca73e13edd0affda860d381d
Add support of set max latency, to change in the maximum powerup latency
requirements for a specific device currently used by Subsystem.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I8749886abb1a7884a42c4d156d89c9cd562a5b1a
Add support to call InitFinalize API in Versal which calls
corresponding LibPM API.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I3428b7245b4db1ef6db8a90b7ad20b6e484ed3b2
For the current XilPM calls, The handler of IPI returns information
with 16 Bytes data.
So during QueryData API call for the ClockName and PinFunctionName,
response data(name of clock or function) response[0..3] are used to
return name. And status is not being returned for such API.
Updated XilPM calls reply in a consistent way and The handler of IPI
return information with 32Bytes data. Where response[0] always set
to status.
For the version-2 of QueryData API, during call for the ClockName
and PinFunctionName, response data(name of clock or function) get as
response[1...4].
To support both the version of QueryData API, added version based
compatibility by the use of feature check.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I336128bff7bbe659903b0f8ce20ae6da7e3b51b4
In JTAG mode check the ATF handoff structure, if the magic string
is not present then use bl32 and bl33 default values.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I1f2c4a2060d8a2e70d3b5fb2473124b685f257fc
Versal firmware adds extra error codes along with PM error codes
while sending response to driver. This makes incorrect error
identification at driver side.
To fix this, mask the unnecessary error bytes before sending the
error code to the driver.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I18c2f3bd2d067e91344852c2f0c1bafea0e6eb23
GIC registers needs to be stored/restored during system
suspend/resume only and not during CPU idle.
During CPU idle, minimum 1 CPU is in ON state.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I5de2ce3a61bf4260f9385349202b0f592a47aaba
Add below API in feature check list which is actually present in
firmware:
- PM_GET_CHIPID
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I98b82da74164f065c8835861f74b0f2855e9bcbf
Existing code passes ACPU0 to LibPM as node_id in set_wakeup_source()
call because last suspending core will be ACPU0 in most of the case.
Now it may be possible that user may disable the ACPU0 using hot-plug
and after that it suspends Linux. So in that case ACPU0 will not be
last suspending core.
To overcome above scenario, pass the current running processor ID
while calling set_wakeup_source().
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: If15354c2150b5bb1305b5f93ca4e8c7a81d59f0a
Save some space by enabling the log messages like bl33 address
only for debug builds. Also check the bl33 and bl32 address and
print only if this is not NULL.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I58d846bf69a75e839eb49abcbb9920af13296886
For boot health status PMU Global General Storage Register 4 is
used. GGS4 can be used for other purpose along with boot health
status. So, change its name from PM_BOOT_HEALTH_STATUS_REG
to PMU_GLOBAL_GEN_STORAGE4.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I2f5c4c6a161121e7cdb4b9f0f8711d0dad16c372
Update the xilinx platform makefile to include GICv2 makefile
instead of adding the individual files. Updating this change
as per the latest changes done in the commit #1322dc94f7.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I79d8374c47a7f42761d121522b32ac7a5021ede8
From GCC-9 implementation of switch case was generated through jump tables,
because of which we are seeing 1MB increase in rodata section. To reduce
the size we are recommending to use fno-jump-tables.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I069733610809b8299fbf641f0ae35b359a8afd69
All EEMI error codes start with value 2000.
Note: Legacy error codes ARGS (=1) and NOTSUPPORTED (=4) returned by
current ATF code have been left in place.
Signed-off-by: Davorin Mista <davorin.mista@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I939afa85957cac88025d82a80f9f6dd49be993b6
Linux clock framework cannot properly deal with these errors. When the
error is related to the lack of permissions to control the clock we
filter the error and report the success to linux. Before recent changes
in clock framework across the stack, this was done in the PMU-FW as a
workaround. Since the PMU-FW now handles clocks and the permissions to
control them using general principles rather than workarounds, it can
no longer distinguish such exceptions and it has to return no-access
error.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I1491a80e472f44e322a542b29a20eb1cb3319802
And from crash_console_flush.
We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.
Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Moved SMCCC defines from plat_arm.h to new <smccc_def.h> header
and include this header in all ARM platforms.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4cbc69c7b9307461de87b7c7bf200dd9b810e485
This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.
NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.
Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch provides separation of GICD, GICR accessor
functions and adds new macros for GICv3 registers access
as a preparation for GICv3.1 and GICv4 support.
NOTE: Platforms need to modify to include both
'gicdv3_helpers.c' and 'gicrv3_helpers.c' instead of the
single helper file previously.
Change-Id: I1641bd6d217d6eb7d1228be3c4177b2d556da60a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I9f8b55414ab7965e431e3e86d182eabd511f32a4
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I7a23327394d142af4b293ea7ccd90b843c54587c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
pm_get_callbackdata() expect result count and not total bytes of
result. Correct it by passing result count to pm_get_callbackdata().
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I01ce0002f7a753e81ea9fe65edde8420a13ed51a
To find result count use ARRAY_SIZE for better readability.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I97201de4d43024e59fa78bd61937c86d47724ab5
Parse the parameter structure the PLM populates, to populate the
bl32 and bl33 image structures.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I317072d1086f6cc6f90883c1b8b6d086ff57b443
ATF handover can be used by Xilinx platforms, so move it to common
file from platform specific files.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5f0839351f534619de581d1953c8427a079487e0
Move pm_client.h to common directory to avoid duplication
of function declaration.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Iea542e681f42db089cccd9b24d286ac8f0a2ce35
This patch makes default build target as silicon instead of QEMU.
The default can be overwritten by specifying it through build flag
VERSAL_PLATFORM.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ia4cb1df1f206db3e514e8ce969acca875e973ace
Add new option for serial and default clock setup.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I0ca7ad51637cdaa6bb891f22c53595d20da7236a
ATF can't fit in current OCM size when the DEBUG is enabled, so
increase the OCM size to use 128Kb.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I2ebfd1f2e9db9c0b28770aea7f8fbf1a8a15787a
The IOU switch clock will be set by PLM during boot so there is no need to
set here and hence this patch removes it.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I1512708411eb07a07c1a8fbd66575efee975431a
This patch modifies cpu clock for Xilinx Versal virtual
platform in order to keep same as used by QEMU.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I169d082462d7ce94a82c62966ab9eb122c5a3fee
This patch adds EEMI support for PM_GET_OPERATING_CHARACTERISTIC api id. This
interface obtains operating characteristic of a device from PMC firmware. The
'power', 'temperature', and 'latency' characteristic are the options that are
supported.
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: If30959ba6a3a778a17df2a4281c2c09832cf7e92
Add support for Get_ChipID API in Versal which calls corresponding
LibPM API.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Acked-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I25c4b301721d7989d982ac376c59195c55564022
This patch adds support for load pdi api to enable loading
pdi from linux.
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I48549e276e1f7b9be45a0bebf559f73bd09d5f69
Add API to check availability of given API in ATF
as well as platform management controller and returns
the supported version number.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I608b38f60b36c4d105b7a205ecb8b02de0c00f3c
Add support to set wakeup source for APU while suspending.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I4809fd83a710def8144fdad74990c45e62b8fdf3
Add GET_CALLBACK_DATA function to get IPI callback
data in Linux during init suspend callback.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ieb60e561b5f656611f0702c43ba6a4296a012651
Add following APIs in plat_psci to support system shutdown & reset:
- versal_system_off
- versal_system_reset
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ia2c1a19ded18984b393e1fdee760bf48b45e9902
Add following APIs in plat_psci to support suspend resume:
- versal_pwr_domain_off
- versal_pwr_domain_suspend
- versal_pwr_domain_suspend_finish
- versal_validate_power_state
- versal_get_sys_suspend_power_state
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ife908a45f32e2037c9c19e13211a8e4b373b8342
Add PMC ops for power domain ON and remove no_pmc ops.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Id4308dfe124b60a751765beb3397d1b0071f14fc
Implement set wakeup source API to pass SMC
call for set wakeup source to PLM (Platform Loader
and Manager).
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I654ce07235c0fc7dfcb81bf98820153255f61537
Implement client wakeup API for versal.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I31b1b362fe645a82f89ce2d698ee71eb00cf15dc
Add PM_QUERY_DATA API to pass query data
EEMI call from Linux to PLM .
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I18735b72ab9cb62fb6cbc7582e77de6cb57f99b0
PM_INIT_FINALIZE is not required for versal. To use Linux
Zynqmp PM driver for versal, handle PM_INIT_FINALIZE API
in ATF for versal by always returning SUCCESS.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I6fe5445d78e713d70282ac8931ff8b17c96b2a14
PM_GET_TRUSTZONE_VERSION API is required to use zynqmp-firmware
driver for versal. Add support of PM_GET_TRUSTZONE_VERSION API
for versal.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ie1c859890096024cc8be67386e3fd0f5f8a4385f
As IPI mailbox service is common to both ZynqMP and Versal,
move it to xilinx/common.
Signed-off-by: Wendy Liang <wendy.liang@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I1a7008ccf7930829621147922d2c6d8d46df5502
Ronak Jain
Madhukar Pappireddy
Venkatesh Yadav Abbarapu
Abhyuday Godhasara
Michal Simek
Jan Kiszka
Rajan Vaja
Shubhrajyoti Datta
Manish Pandey
Tejas Patel
Will Wong
VNSL Durga
Kalyani Akula
Mirela Simonovic
Sai Krishna Potthuri
Ravi Patel
Siva Durga Prasad Paladugu
Davorin Mista
Jimmy Brisson
Olivier Deprez
Manish V Badarkhe
Alexei Fedorov
Andre Przywara
Mark Dykes
Deepika Bhavnani
Norbert Werner
Saeed Nowshadi
Jolly Shah
Wendy Liang