Implemented FWU metadata load and verification APIs.
Also, exported below APIs to the platform:
1. fwu_init - Load FWU metadata in a structure. Also, set the
addresses of updated components in I/O policy
2. fwu_is_trial_run_state - To detect trial run or regular run
state
Change-Id: I67eeabb52d9275ac83be635306997b7c353727cd
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
A RAS error may be triggered while offline core in OS. Error:
Uncorrected software error in the Distributor, with IERR=9,SERR=f.
Core put to sleep before its Group enables were cleared.
gicv3_cpuif_disable() will be called in offline core flow.
According to GIC architecture version 3 and version 4:
Architectural execution of a DSB instruction guarantees that
the last value written to ICC_IGRPEN0_EL1, ICC_IGRPEN1_EL1,
ICC_IGRPEN1_EL3 or GICC_CTLR.{EnableGrp0, EnableGrp1}is observed
by the associated Redistributor.
An ISB or other context synchronization operation must precede
the DSB to ensure visibility of System register writes.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: Iff1475657f401374c761b5e8f2f5b3a4b2040e9d
One platform may not implement all the protocols, to avoid build break
when we not include all the protocols, add weak functions.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I1485baa2e8f381cb0eede1a7b93ed10e49934971
Add SCMI power domain protocol, with POWER_STATE_NOTIFY and
POWER_STATE_CHANGE_REQUESTED_NOTIFY not implemented.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ia7c4db57c4c702667f8eaa630c924016e4a8bde0
For AARCH64, BIT() will make the number as ULL type, let use BIT_32()
here.
And use %zu for size_t print format.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I1dc18d374cd2c6eb83b40b66ed6189dcc6a21728
- In add_event2():
Turn the first error condition checking whether there is room for an
extra event2 data structure into an assertion. The platform layer is
responsible for choosing an appropriate event log buffer size based
on the number of measurements it expects. If this assertion fires,
the platform macro EVENT_LOG_SIZE should be adjusted and the
firmware recompiled.
Call this assumption out in the function documentation.
Also remove the second error condition check, which is a subset of
the first one and thus is redundant.
As a result of these changes, add_event2() can no longer fail. Thus,
change its return type from int to void.
Also, the 'size_of_event' local variable is now unused in release
builds so remove it and move its value into the assertion.
Change-Id: I113fc141de59708b20435a0c7126255561ab7786
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
- In event_log_init():
Throughout the function, we are incrementing a pointer by some fixed
amounts of bytes (corresponding to the size of some data structure or
to some constant number of bytes), there is no variable-size
increments in the picture. Thus it seems pointless to verify that the
pointer has indeed been incremented by this fixed amount of bytes
afterwards.
For this reason, remove these checks altogether. As a result, the
start_ptr local variable is now unused so remove it as well.
Change-Id: I612e2278cd3a63d1417427e45d81e285503f5efe
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Weak definitions are confusing and should be avoided if possible.
Thus, turn plat_get_measured_boot_data() into a strong definition that
platforms must provide (if they need measured boot).
We could have moved the old weak implementation under plat/common as a
sane, default implementation that platforms may pull in if it suits
them. However, this implementation right now simply measures BL2,
which is not enough to get a complete measured boot flow, so this
patch just removes it.
This change only affects the Arm FVP platform, as no other upstream
platform implements measured boot at the moment.
Change-Id: If8680a39ae0ef1044ee981315439d5e0c8461229
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Invert test logic on the status register control to
fix issue when the bit SR_QUAD_EN_MX is not set.
Change-Id: I8b2f140219f124336bf96462abf9d9445d0308bc
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
In pmic_operate(), "regulators" node value must be checked before
entering in the fdt_for_each_subnode loop.
Change-Id: I1460cd24ec56ec47ab644f396b71b92973e75fb4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Make sure that i2c->i2c_state is correctly initialized
with I2C_STATE_RESET value this avoid hi2c->lock to not
be set to 0 when calling stm32_i2c_init during platform
suspend/resume operations.
Change-Id: I3b4c1f9115589325eb256789a1764c322741db7d
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The function stm32mp1_clk_init() returns an int. Return a negative
error value if the device tree is not found.
Change-Id: I422d5fea46c4d63d55a5b62e1db154c1f53f41b7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use helper functions to get SPI and ESPI INTID limit, to remove
several pieces of similar code in gicv3 driver.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Iaf441fe5e333c4260e7f6d98df6fdd931591976d
Add helper function gicv3_get_espi_limit() to get the value of
(maximum extended SPI INTID + 1), so that some duplicated code can be
removed later.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I0355ca2647f872e8189add259f6c47d415494cce
Add newline(\n) to make the message clearer when the warnings are
really triggered.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I5e2574a52c9065db32ecb4d453b9b02445f69a82
Add helper function gicv3_get_spi_limit() to get the value of (maximum
SPI INTID + 1), so that some duplicated code can be removed later.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I160c8a88fbb71d22790b8999a84afbfba766f5e7
When retrieving data from stm32 image file, the header is removed with
a memcpy that shifts the data to overwrite the useless header for next
binary.
STM32 binary from boot device:
|-------------------------------------|
| header | payload |
|-------------------------------------|
After the memcpy:
|-------------------------------------|
| payload | remain |
|-------------------------------------|
But the remaining data after the shifted payload is still in
the cache. As it is of no use for anyone, just invalidate the cache
at this address.
This is required if the DDR is mapped secure in BL2, and the secure
access is forbidden in BL33, or else TZC-400 issues an error.
Change-Id: Ice2af3b1ca49eccb79bfc62db60437e259d344ca
Signed-off-by: Yann Gautier <yann.gautier@st.com>
A variable hdr_sz is created in stm32image_partition_read() function.
It just represents the size of the stm32 image header but it really
improves the readability of the function.
Change-Id: I95ec62a78a4b6c6a75b0d8c8aa0faef8bee424da
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Fixes implementation against build warning reported by GCC:
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:6: error: ‘result’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
int result;
^~~~~~
Actually, by construction the current implementation of function
stm32image_partition_read() does not mandate result to be initialized
since it always reaches the exit point with a valid value in 'result'.
Yet, this change prevents compiler from complaining and is more robust
against future changes in the implementation.
Change-Id: I383575edb605b7535398952a5fdfc266c0068c71
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use dedicated read function for boot partition
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: If75df7691fce0797205365736fc6e4e3429efdca
Added a public function to read blocks from a current boot partition.
switch between partitions has to respect eMMC partition switch timing.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I55b0c910314253e5647486609583fd290dadd30a
The UART code for the A3K platform assumes that UART parent clock rate
is always 25 MHz. This is incorrect, because the xtal clock can also run
at 40 MHz (this is board specific).
The frequency of the xtal clock is determined by a value on a strapping
pin during SOC reset. The code to determine this frequency is already in
A3K's comphy driver.
Move the get_ref_clk() function from the comphy driver to a separate
file and use it for UART parent clock rate determination.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
when comphy is in pcie mode, correct reference clock need be
selected according to SAR register that reflect the CPx_MPP boot
strapping pins. Either from external or from internal
Signed-off-by: Guo Yi <yguo@cavium.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Change-Id: I99ed64a141e85174cc0f8e9dab5886ab2506efa1
When configuring the UART_BAUD_REG register, the function
console_a3700_core_init() currently only changes the baud divisor field,
leaving other fields to their previous value.
This is incorrect, because the baud divisor is computed with the
assumption that the parent clock rate is 25 MHz, and since the other
fields in this register configure the parent clock, which could have
been changed by U-Boot or Linux.
Fix this function to also configure the other fields so that the UART
parent clock is selected to be the xtal clock.
For example without this change TF-A prints only
ERROR: a3700_system_off needs to be implemented
followed by garbage after plat_crash_console_init() is called.
After applying this change instead of garbage it also print crash info:
PANIC at PC : 0x0000000004023800
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I72f338355cc60d939b8bb978d9c7fdd576416b81
UART parent clock is by default the platform's xtal clock, which is
25 MHz.
The value defined in the driver, though, is 25.8048 MHz. This is a hack
for the suboptimal divisor calculation
Divisor = UART clock / (16 * baudrate)
which does not use rounding division, resulting in a suboptimal value
for divisor if the correct parent clock rate was used.
Change the code for divisor calculation to
Divisor = Round(UART clock / (16 * baudrate))
and change the parent clock rate value to 25 MHz.
The final UART divisor for default baudrate 115200 is not affected by
this change.
(Note that the parent clock rate should not be defined via a macro,
since the xtal clock can also be 40 MHz. This is outside of the scope of
this fix, though.)
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iaa401173df87aec94f2dd1b38a90fb6ed0bf0ec6
Platform NV counter get updated (if cert NV counter > plat NV counter)
before authenticating the certificate if the platform specifies NV
counter method before signature authentication in its CoT, and this
provides an opportunity for a tempered certificate to upgrade the
platform NV counter. This is theoretical issue, as in practice none
of the standard CoT (TBBR, dualroot) or upstream platforms ones (NXP)
exercised this issue.
To fix this issue, modified the auth_nvctr method to do only NV
counter check, and flags if the NV counter upgrade is needed or not.
Then ensured that the platform NV counter gets upgraded with the NV
counter value from the certificate only after that certificate gets
authenticated.
This change is verified manually by modifying the CoT that specifies
certificate with:
1. NV counter authentication before signature authentication
method
2. NV counter authentication method only
Change-Id: I1ad17f1a911fb1035a1a60976cc26b2965b05166
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
* changes:
renesas: rzg: Add support to identify EK874 RZ/G2E board
drivers: renesas: common: watchdog: Add support for RZ/G2E
drivers: renesas: rzg: Add QoS support for RZ/G2E
drivers: renesas: rzg: Add PFC support for RZ/G2E
drivers: renesas: common: Add support for DRAM initialization on RZ/G2E SoC
renesas: rzg: Add support to identify HopeRun HiHope RZ/G2N board
drivers: renesas: common: emmc: Select eMMC channel for RZ/G2N SoC
drivers: renesas: rzg: Add QoS support for RZ/G2N
drivers: renesas: rzg: Add PFC support for RZ/G2N
drivers: renesas: common: Add support for DRAM initialization on RZ/G2N SoC
renesas: rzg: Add support to identify HopeRun HiHope RZ/G2H board
drivers: renesas: common: emmc: Select eMMC channel for RZ/G2H SoC
drivers: renesas: rzg: Add QoS support for RZ/G2H
drivers: renesas: rzg: Add PFC support for RZ/G2H
drivers: renesas: common: Add support for DRAM initialization on RZ/G2H SoC
drivers: renesas: rzg: Switch using common ddr code
drivers: renesas: ddr: Move to common
Add support to identify Silicon Linux RZ/G2E evaluation kit (EK874).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Id7bdbc9b0d25aa9af496d58d4bd5055579edc104
Add pin control support for RZ/G2E SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I736724cc0dd32f2169018ed7f2f48319b039b61f
DRAM initialization on RZ/G2E SoC is identical to R-Car E3 so re-use the
same.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I454fb40af4f8ce6c4c0d2a53edb307326efd02df
Add pin control support for RZ/G2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Ib5eb4f3b1b75e158ec13c4eefdbe9688344206a3
Add support for initializing DRAM on RZ/G2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Id09a367b92b11a5da88f2dce6887677cc935d0c0
Manish V Badarkhe
Manish Pandey
Ming Huang
Peng Fan
Sandrine Bailleux
Mark Dykes
Lionel Debieve
Nicolas Le Bayon
Benjamin Gaignard
Yann Gautier
Madhukar Pappireddy
Heyi Guo
Vyacheslav Yurkov
Pali Rohár
Guo Yi
Lad Prabhakar