This new page contains instructions for doing a local
build of the documentation, plus information on the environment
setup that needs to be done beforehand.
Change-Id: If563145ab40639cabbe25d0f62759981a33692c6
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
The readme.rst and license.rst files in the project root overlap
with the index.rst and license.rst files in the docs/ folder. We
need to use the latter when building the documentation, as Sphinx
requires all included files to be under a common root. However,
the files in the root are currently used by the cgit and Github
viewers.
Using symlinks in Git presents some difficulties so the best
course of action is likely to leave these files but in stub form.
The license.rst file in the root will simply tell the reader to
refer to docs/license.rst.
The readme.rst file will contain a small amount of content that
is derived from the docs/index.rst file, so that the Github main
page will have something valid to show, but it will also contain
a link to the full documentation on ReadTheDocs.
Change-Id: I6dc46f08777e8d7ecb32ca7afc07a28486c9f77a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Currently links between documents are using the format:
<path/to/><filename>.rst
This was required for services like GitHub because they render each
document in isolation - linking to another document is like linking
to any other file, just provide the full path.
However, with the new approach, the .rst files are only the raw
source for the documents. Once the documents have been rendered
the output is now in another format (HTML in our case) and so,
when linking to another document, the link must point to the
rendered version and not the .rst file.
The RST spec provides a few methods for linking between content.
The parent of this patch enabled the automatic creation of anchors
for document titles - we will use these anchors as the targets for
our links. Additional anchors can be added by hand if needed, on
section and sub-section titles, for example.
An example of this new format, for a document with the title
"Firmware Design" is :ref:`Firmware Design`.
One big advantage of this is that anchors are not dependent on
paths. We can then move documents around, even between directories,
without breaking any links between documents. Links will need to be
updated only if the title of a document changes.
Change-Id: I9e2340a61dd424cbd8fd1ecc2dc166f460d81703
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Add meson-g12a, qemu-sbsa and rpi4 to the documentation index so
that they will have their docs rendered and integrated into the
table of contents.
Change-Id: Id972bf2fee67312dd7bff29f92bea67842e62431
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Coherent I-cache is causing a prefetch violation where when the core
executes an instruction that has recently been modified, the core might
fetch a stale instruction which violates the ordering of instruction
fetches.
The workaround includes an instruction sequence to implementation
defined registers to trap all EL0 IC IVAU instructions to EL3 and a trap
handler to execute a TLB inner-shareable invalidation to an arbitrary
address followed by a DSB.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ic3b7cbb11cf2eaf9005523ef5578a372593ae4d6
Make the spinlock implementation use ARMv8.1-LSE CAS instruction based
on a platform build option. The CAS-based implementation used to be
unconditionally selected for all ARM8.1+ platforms.
The previous CAS spinlock implementation had a bug wherein the spin_unlock()
implementation had an `sev` after `stlr` which is not sufficient. A dsb is
needed to ensure that the stlr completes prior to the sev. Having a dsb is
heavyweight and a better solution would be to use load exclusive semantics
to monitor the lock and wake up from wfe when a store happens to the lock.
The patch implements the same.
Change-Id: I5283ce4a889376e4cc01d1b9d09afa8229a2e522
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
This patch introduces Qemu SBSA platform.
Both platform specific files where copied from qemu/qemu with changes for
DRAM base above 32bit and removal of ARMv7 conditional defines/code.
Documentation is aligned to rest of SBSA patches along the series and
planed changes in edk2-platform repo.
FixesARM-software/tf-issues#602
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I8ebc34eedb2268365e479ef05654b2df1b99128c
- Updated Linaro release version number to 19.06
- Updated links to Linaro instructions and releases
- Removed the Linaro old releases link
Signed-off-by: zelalem-aweke <zelalem.aweke@arm.com>
Change-Id: Ib786728106961e89182b42183e7b889f6fc74190
* changes:
amlogic: g12a: Add support for the S905X2 (G12A) platform
amlogic: makefile: Use PLAT variable when possible
amlogic: sha_dma: Move register mappings to platform header
* changes:
rpi4: Add initial documentation file
rpi4: Add stdout-path to device tree
rpi4: Add GIC maintenance interrupt to GIC DT node
rpi4: Cleanup memory regions, move pens to first page
rpi4: Reserve resident BL31 region from non-secure world
rpi4: Amend DTB to advertise PSCI
rpi4: Determine BL33 entry point at runtime
rpi4: Accommodate "armstub8.bin" header at the beginning of BL31 image
Add basic support for Raspberry Pi 4
rpi3: Allow runtime determination of UART base clock rate
FDT helper functions: Respect architecture in PSCI function IDs
FDT helper functions: Add function documentation
* changes:
Migrate ARM platforms to use the new GICv3 API
Adding new optional PSCI hook pwr_domain_on_finish_late
GICv3: Enable multi socket GIC redistributor frame discovery
Introduce the preliminary support for the Amlogic S905X2 (G12A) SoC.
This port is a minimal implementation of BL31 capable of booting
mainline U-Boot and Linux. Tested on a SEI510 board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ife958f10e815a4530292c45446adb71239f3367f
This PSCI hook is similar to pwr_domain_on_finish but is
guaranteed to be invoked with the respective core and cluster are
participating in coherency. This will be necessary to safely invoke
the new GICv3 API which modifies shared GIC data structures concurrently.
Change-Id: I8e54f05c9d4ef5712184c9c18ba45ac97a29eb7a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This patch:
- Adds any leftover platform ports that were not having their
documentation built (not in the index.rst table of contents)
- Corrects a handful of RST formatting errors that cause poor
rendering
- Reorders the list of platforms so that they are displayed
in alphabetical order
Change-Id: If8c135a822d581c3c5c4fca2936d501ccfd2e94c
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
As the Raspberry Pi4 port is now in a usable state, add the build
instructions together with some background information to the
documentation directory.
The port differs quite a bit from the Raspberry Pi 3, so we use a
separate file for that.
Change-Id: I7d9f5967fdf3ec3bfe97d78141f59cbcf03388d4
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The documentation for Marvell platforms was not included in the
rendered document output until now because, while it was mostly
valid RST format, the files were saved with a .txt extension.
This patch corrects some RST formatting errors, creates a document
tree (index page) for the Marvell documents, and adds the Marvell
subtree to the main index.
Change-Id: Id7d4ac37eded636f8f62322a153e1e5f652ff51a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
The block size of some storage device is 4096-byte long, such as UFS. But
PARTITION_BLOCK_SIZE is defined as 512-byte long. So replace it by
PLAT_PARTITION_BLOCK_SIZE. Make it configurable in platform.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Change-Id: Iada05f7c646d0a0f2c0d3b8545540b3cb7153de3
This patch provides the following features and makes modifications
listed below:
- Individual APIAKey key generation for each CPU.
- New key generation on every BL31 warm boot and TSP CPU On event.
- Per-CPU storage of APIAKey added in percpu_data[]
of cpu_data structure.
- `plat_init_apiakey()` function replaced with `plat_init_apkey()`
which returns 128-bit value and uses Generic timer physical counter
value to increase the randomness of the generated key.
The new function can be used for generation of all ARMv8.3-PAuth keys
- ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`.
- New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions
generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively;
pauth_disable_el1()` and `pauth_disable_el3()` functions disable
PAuth for EL1 and EL3 respectively;
`pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from
cpu-data structure.
- Combined `save_gp_pauth_registers()` function replaces calls to
`save_gp_registers()` and `pauth_context_save()`;
`restore_gp_pauth_registers()` replaces `pauth_context_restore()`
and `restore_gp_registers()` calls.
- `restore_gp_registers_eret()` function removed with corresponding
code placed in `el3_exit()`.
- Fixed the issue when `pauth_t pauth_ctx` structure allocated space
for 12 uint64_t PAuth registers instead of 10 by removal of macro
CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h`
and assigning its value to CTX_PAUTH_REGS_END.
- Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions
in `msr spsel` instruction instead of hard-coded values.
- Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI.
Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
* changes:
Remove RSA PKCS#1 v1.5 support from cert_tool
Add documentation for new KEY_SIZE option
Add cert_create tool support for RSA key sizes
Support larger RSA key sizes when using MBEDTLS
Support for PKCS#1 v1.5 was deprecated in SHA 1001202 and fully removed
in SHA fe199e3, however, cert_tool is still able to generate
certificates in that form. This patch fully removes the ability for
cert_tool to generate these certificates.
Additionally, this patch also fixes a bug where the issuing certificate
was a RSA and the issued certificate was EcDSA. In this case, the issued
certificate would be signed using PKCS#1 v1.5 instead of RSAPSS per
PKCS#1 v2.1, preventing TF-A from verifying the image signatures. Now
that PKCS#1 v1.5 support is removed, all certificates that are signed
with RSA now use the more modern padding scheme.
Change-Id: Id87d7d915be594a1876a73080528d968e65c4e9a
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This patch adds documentation for the new KEY_SIZE build option that is
exposed by cert_create, and instructions on how to use it.
Change-Id: I09b9b052bfdeeaca837e0f0026e2b01144f2472c
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
Some of the platform (ie. Agilex) make use of CCU IPs which will only be
initialized during bl2_el3_early_platform_setup. Any operation to the
cache beforehand will crash the platform. Hence, this will provide an
option to skip the data cache invalidation upon bl2 entry at EL3
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2c924ed0589a72d0034714c31be8fe57237d1f06
* changes:
amlogic: Fix includes order
amlogic: Fix header guards
amlogic: Fix prefixes in the SoC specific files
amlogic: Fix prefixes in the PM code
amlogic: Fix prefixes in the SCPI related code
amlogic: Fix prefixes in the MHU code
amlogic: Fix prefixes in the SIP/SVC code
amlogic: Fix prefixes in the thermal driver
amlogic: Fix prefixes in the private header file
amlogic: Fix prefixes in the efuse driver
amlogic: Fix prefixes in the platform macros file
amlogic: Fix prefixes in the helpers file
amlogic: Rework Makefiles
amlogic: Move the SIP SVC code to common directory
amlogic: Move topology file to common directory
amlogic: Move thermal code to common directory
amlogic: Move MHU code to common directory
amlogic: Move efuse code to common directory
amlogic: Move platform macros assembly file to common directory
amlogic: Introduce unified private header file
amlogic: Move SCPI code to common directory
amlogic: Move the SHA256 DMA driver to common directory
amlogic: Move assembly helpers to common directory
amlogic: Introduce directory parameters in the makefiles
meson: Rename platform directory to amlogic
This patch adds support for the Undefined Behaviour sanitizer. There are
two types of support offered - minimalistic trapping support which
essentially immediately crashes on undefined behaviour and full support
with full debug messages.
The full support relies on ubsan.c which has been adapted from code used
by OPTEE.
Change-Id: I417c810f4fc43dcb56db6a6a555bfd0b38440727
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
A new build flag, CTX_INCLUDE_MTE_REGS, has been added; this patch adds
documentation for it in the User Guide along with instructions of what
different values mean.
Change-Id: I430a9c6ced06b1b6be317edbeff4f5530e30f63a
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
Meson is the internal code name for the SoC family. The correct name for
the platform should be Amlogic. Change the name of the platform
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Icc140e1ea137f12117acbf64c7dcb1a8b66b345d
At the time of writting, GCC 8.3-2019.03 is the latest version available
on developer.arm.com.
Switch to bare-metal toolchain (arm-eabi-) for AArch32. This allows to
have a finer control on the use of floating-point and SIMD instructions.
Change-Id: I4438401405eae1e5f6d531b0162e8fa06f69135e
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
The features of the previously existing gentbl, genvar and genwrappers
scripts were reimplemented in the romlib_generator.py Python script.
This resulted in more readable and maintainable code and the script
introduces additional features that help dependency handling in
makefiles. The assembly templates were separated from the script logic
and were collected in the 'templates' directory.
The targets and their dependencies were reorganized in the makefile and
the dependency handling of included index files is possible now.
Incremental build is available in case of modifying the index files.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: I79f65fab9dc5c70d1f6fc8f57b2a3009bf842dc5
Add uml sequence and class diagram to illustrate the behavior of the
storage abstraction layer.
Change-Id: I338262729f8034cc3d3eea1d0ce19cca973a91bb
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Currently we have some pre-rendered versions of certain diagrams
in SVG format. These diagrams have corresponding PlantUML source
that can be rendered automatically as part of the documentation
build, removing the need for any intermediate files.
This patch adds the Sphinx "plantuml" extension, replaces
references to the pre-rendered SVG files within the documents,
and finally removes the SVG files and helper script.
New requirements for building the docs are the
"sphinxcontrib-plantuml" Python module (added to the pip
requirements.txt file) and the Graphviz package (provides the
"dot" binary) which is in the Ubuntu package repositories.
Change-Id: I24b52ee40ff79676212ed7cff350294945f1b50d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Paul Beesley
Soby Mathew
laurenw-arm
Louis Mayencourt
Sandrine Bailleux
Radoslaw Biernacki
zelalem-aweke
Carlo Caione
Madhukar Pappireddy
Andre Przywara
Haojian Zhuang
Alexei Fedorov
Justin Chadwell
Hadi Asyrafi
Artsem Artsemenka
Imre Kis
Balint Dobszay