As there is constraint with the space for the release builds,
remove some of the legacy code.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5b8b16f34ed8e480f16ab1aeac80b85cdb391852
Add imx_system_reset2 which extends existing SYSTEM_RESET. It provides
architectural reset definitions and vendor-specific resets.
By default warm reset is triggered.
Also refactor existing implementation of wdog reset, add details about
each flag used.
Change-Id: Ia7348c32c385f1c61f8085776e81dd1e38ddda5c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
* changes:
feat(plat/nxp/lx2): add SUPPORTED_BOOT_MODE definition
feat(plat/nxp/common): add build macro for BOOT_MODE validation checking
refactor(plat/nxp/common): moved soc make-variables to new soc_common_def.mk
refactor(plat/nxp/lx216x): clean up platform configure file
refactor(plat/nxp/common): moved plat make-variables to new plat_common_def.mk
Fix the mapping of SCMI clock specifiers to the clusters they drive.
Also, add CPU cores to cluster mappings.
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Change-Id: I230bea5614de4e29b54e1686b31bf01c0b6aa86c
* changes:
refactor(plat/nvidia): use SOC_ID defines
refactor(plat/mediatek): use SOC_ID defines
refactor(plat/arm): use SOC_ID defines
feat(plat/st): implement platform functions for SMCCC_ARCH_SOC_ID
refactor(plat/st): export functions to get SoC information
feat(smccc): add bit definition for SMCCC_ARCH_SOC_ID
Use helper functions to get SPI and ESPI INTID limit, to remove
several pieces of similar code in gicv3 driver.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Iaf441fe5e333c4260e7f6d98df6fdd931591976d
Add helper function gicv3_get_espi_limit() to get the value of
(maximum extended SPI INTID + 1), so that some duplicated code can be
removed later.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I0355ca2647f872e8189add259f6c47d415494cce
Add macro of SUPPORTED_BOOT_MODE for board lx2160ardb, lx2160aqds,
lx2162aqds.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I4451ca030eca79c9bc5fee928eec497a7f0e878c
1. Added the build macro "add_boot_mode_define".
2. Use the macro to validate current BOOT_MODE against the
pre-determined list of SUPPORTED_BOOT_MODE, so each platform
need to define the list: SUPPORTED_BOOT_MODE.
3. Reports error if BOOT_MODE is not in SUPPORTED_BOOT_MODE list,
or BOOT_MODE is not supported yet althoug it is in SUPPORTED_BOOT_MODE.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I29be60ecdb19fbec1cd162e327cdfb30ba629b07
Move some soc make variables to new soc_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ia30bd332c95b6475f1cfee2f03a8ed3892a9568d
Use common code in common file to configure platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I72fe22751f12b8a4996a7b9f75fae4c912ea86de
Move some common make variables to new plat_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I37bd65b0f8124f63074fa03339f886c2cdb30bd3
Add sdei support for i.MX8MM, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I8308c629448bd8adca9d3d25701adcf0c5a6afc2
Add sdei support for i.MX8MN, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ie15fffdd09e1bba1b22334b8ccac2335c96b8b4d
Add helper function gicv3_get_spi_limit() to get the value of (maximum
SPI INTID + 1), so that some duplicated code can be removed later.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I160c8a88fbb71d22790b8999a84afbfba766f5e7
Due to the small OCRAM space used for TF-A, we will
meet imx8mq build failure caused by too small RAM size.
We CANNOT support it in TF-A CI. It does NOT mean that
imx8mq will be dropped by NXP. NXP will still actively
maintain it in NXP official release.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Iad726ffbc4eedc5f6770612bb9750986b9324ae9
Device Tree address is now a parameter for dt_open_and_check() function.
This will allow better flexibility when introducing PIE and FIP.
The fdt pointer is now only assigned if the given address holds
a valid device tree file. This allows removing the fdt_checked variable,
as we now check fdt is not null.
Change-Id: I04cbb2fc05c9c711ae1c77d56368dbeb6dd4b01a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The boot device is now checked inside a dedicated rule, that is only
called during BL2 compilation step
Change-Id: Ie7bcd1f166285224b0c042238989a82f7b6105c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Added a new STM32MP_EMMC_BOOT option, which is used to look for SSBL in
the same eMMC boot partition TF-A booted from at a fixed 256k offset. In
case STM32 image header is not found, the boot process rolls back to a
GPT partition look-up scheme.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I85a87dc9ae7f2b915ed8e584be80f4b3588efc48
Use dedicated read function for boot partition
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: If75df7691fce0797205365736fc6e4e3429efdca
Added a public function to read blocks from a current boot partition.
switch between partitions has to respect eMMC partition switch timing.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I55b0c910314253e5647486609583fd290dadd30a
Add basic SDEI support, implementing the software event 0 only for now.
This already allows hypervisors like Jailhouse to use SDEI for internal
signaling while passing the GICC through to the guest (see also IMX8).
With SDEI on, we overrun the SRAM and need to stay in DRAM. So keep SDEI
off by default.
Co-developed-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: Ic0d71b4ef0978c0a34393f4e3530ed1e24a39ca2
The io_dummy code and function calls are only used in case BL32 is TF-A
SP_min, and not OP-TEE. This code in bl2_io_storage can then be put under
#ifndef AARCH32_SP_OPTEE.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I52787a775160b335f97547203f653419621f5147
STM32MP1 does not use BL1, the loading of BL2 is done by ROM code. It is
then useless to have an entry BL2_IMAGE_ID in the policies.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I464cedf588114d60522433123f8dbef32ae36818
The SPMC at S-EL2 manages S-EL1 execution contexts for SPs. The
currently running SP vCPU state is always saved when the SPMC exits to
SPMD. A fresh vCPU context is always restored when the SPMC is entered
from the SPMD and a SP resumed. For performance optimization reasons
this permits omitting the saving/restoring of the S-EL1 context from
within the EL3 SPMD on entering/exiting the SPMC. The S-EL2 SPMC and
NS-EL1 context save/restore remain done in the SPMD.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I66413ed5983913791ff5c9fc03c590ee65c6ccd7
Fix a remainder from early prototyping. OP-TEE as a secure partition
does not need specific SMC function id pass through to EL3.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I2843d1b9a5eb4c966f82790e1655fb569c2de7d4