Migrate dw_mmc driver from emmc framework to mmc framework. The
emmc framework will be abandoned.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
It should set buswidth and speed of mmc controller before accessing
mmc.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
DMA is always used in mmc driver. So the buffer address should
always follow the DMA limitation.
There're same requirement in mmc_read_blocks()/mmc_write_blocks()
on parameter buf. Since parameter buf comes from io_block driver,
it's already handled in io_block driver.
At here, just make the minimum address alignment on 16 chars.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
mmc_read_blocks()/mmc_write_blocks() derived from io_block_ops_t
type. It means that lba param should be integer type, not
unsigned integer type.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Sending CMD8 before CMD1 just causes to fetch data failure in eMMC.
Check whether it's eMMC first. If it's eMMC, send CMD1 command instead.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Functions provided by stdio.h such as printf and sprintf are available
in the codebase, but they add a lot of code to the final image if they
are used:
- AArch64: ~4KB
- AArch32: ~2KB in T32, ~3KB in A32
tf_printf and tf_snprintf are a lot more simple, but it is preferable
to use them when possible because they are also used in common code.
Change-Id: Id09fd2b486198fe3d79276e2c27931595b7ba60e
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
During cold boot, the initial translation tables are created with data
caches disabled, so all modifications go to memory directly. After the
MMU is enabled and data cache is enabled, any modification to the tables
goes to data cache, and eventually may get flushed to memory.
If CPU0 modifies the tables while CPU1 is off, CPU0 will have the
modified tables in its data cache. When CPU1 is powered on, the MMU is
enabled, then it enables coherency, and then it enables the data cache.
Until this is done, CPU1 isn't in coherency, and the translation tables
it sees can be outdated if CPU0 still has some modified entries in its
data cache.
This can be a problem in some cases. For example, the warm boot code
uses only the tables mapped during cold boot, which don't normally
change. However, if they are modified (and a RO page is made RW, or a XN
page is made executable) the CPU will see the old attributes and crash
when it tries to access it.
This doesn't happen in systems with HW_ASSISTED_COHERENCY or
WARMBOOT_ENABLE_DCACHE_EARLY. In these systems, the data cache is
enabled at the same time as the MMU. As soon as this happens, the CPU is
in coherency.
There was an attempt of a fix in psci_helpers.S, but it didn't solve the
problem. That code has been deleted. The code was introduced in commit
<264410306381> ("Invalidate TLB entries during warm boot").
Now, during a map or unmap operation, the memory associated to each
modified table is flushed. Traversing a table will also flush it's
memory, as there is no way to tell in the current implementation if the
table that has been traversed has also been modified.
Change-Id: I4b520bca27502f1018878061bc5fb82af740bb92
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Changed the names for consistency with the rest of the library. Introduced
new helpers that manipulate the active translation tables context.
Change-Id: Icaca56b67fcf6a96e88aa3c7e47411162e8e6856
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Add support for System Guidance for Mobile platform SGM775
Change-Id: I2442a50caae8f597e5e5949cd48f695cf75d9653
Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>
In css platforms where the cpu/cluster management is done by the hardware,
software does need to issue certain scmi requests.
This patch wraps those scmi calls around the HW_ASSISTED_COHERENCY
build option to remove them on platforms that have this hardware support.
Change-Id: Ie818e234484ef18549aa7f977aef5c3f0fc26c27
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>
This omission causes a build error as the definition for
arm_tzc_regions_info_t is needed from plat_arm.h
Change-Id: I26935ee90d3e36ab6a016ff2c4eee4413df3e4e8
Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>
The Arm SGI platforms can switch to using SCMI. So enable support for
SCMI and remove portions of code that would be unused after switching
to SCMI.
Change-Id: Ifd9e1c944745f703da5f970b5daf1be2b07ed14e
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
On SGI platforms, the 'CORE_PWRDN_EN' bit of 'CPUPWRCTLR_EL1'
register requires an explicit write to clear it for hotplug and
idle to function correctly. The reset value of this bit is zero
but it still requires this explicit clear to zero. This indicates
that this could be a model related issue but for now this issue can
be fixed be clearing the CORE_PWRDN_EN in the platform specific
reset handler function.
Change-Id: I4222930daa9a3abacdace6b7c3f4a5472ac0cb19
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Romlib is a new image that is stored in ROM and contains the code of
several libraries that can be shared between different images. All
the functions within in the library are accessed using a jump table
which allows to update the romlib image whithout changing the binary
compatibility. This jump table can be also stored in RAM and it can
allow to patch a romlib with potential bugs fixes..
Change-Id: If980ccdaca24b7aaca900e32acc68baf6f94ab35
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
We had exit but we didn't have atexit, and we were calling panic and
tf_printf from exit, which generated a dependency from exit to them.
Having atexit allows to set a different function pointer in every image.
Change-Id: I95b9556d680d96249ed3b14da159b6f417da7661
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Mbebtls include paths are controlled by the user using the variable
MBEDTLS_DIR and they are out of the TF source tree. Since these
includes have a different origin it is better to move them to a
different variable.
This change makes easier for the romlib Makefile to parse the include
paths.
Change-Id: I3e4c99300f1012bc7f88c6b9f5bc0ec1f7b5aa8d
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
TF Makefile was linking all the objects files generated for the
Mbed TLS library instead of creating a static library that could be
used in the linking stage.
Change-Id: I8e4cd843ef56033c9d3faeee71601d110b7e4c12
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
TF Makefile was linking all the objects files generated for the
c library instead of creating a static library that could be
used in the linking stage.
Change-Id: I721daea097e9b13cbb42c9f8eaa2af8fea0799cf
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
TF Makefile was linking all the objects files generated for the
fdt library instead of creating a static library that could be
used in the linking stage.
Change-Id: If3705bba188ec39e1fbf2322a7f2a9a941e1b90d
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
This patch adds all the make macros needed to create a library archive
and to use it in the link stage.
Change-Id: I26597bfd6543649d0b68a9b1e06aec1ba353e6de
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
TF won't build since no memory region is specified
for when SEPARATE_CODE_AND_RODATA=0 it still relies on
the ARM_MAP_BL_RO_DATA region which is never defined for
this case. Create memory region combining code and RO data for
when the build flag SEPARATE_CODE_AND_RODATA=0 to fix this
Change-Id: I6c129eb0833497710cce55e76b8908ce03e0a638
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
This would enable us to write semantically sensible code.
Change-Id: Ie7c75f9c024f671a037448f5c0922174fff3f0ce
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Fix the types of the arguments of trusty_generic_platform_smc()
to match the expected prototype of a runtime service handler
(see rt_svc_handle_t type).
Change-Id: Ie839d116ca924b4b018ea2abbef72a1073da2a32
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Added information on how disjunctively dual licensed code from
other projects is treated in the TF-A project.
Change-Id: Idca329abba4d36bd3c4fd722ac1556940b9135a2
Signed-off-by: Dan Handley <dan.handley@arm.com>
Set the function pointers in the console struct and the functions
they point to to const since they only need to be defined when
the console is being initialised and should not be changed after
Change-Id: I0574307111e3ab2f13d1a4a74c3fa75532dfa4be
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>