The FF-A v1.0 spec allows two configurations for the number of EC/vCPU
instantiated in a Secure Partition:
-A MultiProcessor (MP) SP instantiates as many ECs as the number of PEs.
An EC is pinned to a corresponding physical CPU.
-An UniProcessor (UP) SP instantiates a single EC. The EC is migrated to
the physical CPU from which the FF-A call is originating.
This change permits exercising the latter case within the TF-A-tests
framework.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I7fae0e7b873f349b34e57de5cea496210123aea0
Rename rd_n1e1_edge_scmi_plat_info array to plat_rd_scmi_info as the
same array is used to provide SCMI platform info across mulitple RD
platforms and is not resitricted to only RD-N1 and RD-E1 platforms.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I42ba33e0afa3003c731ce513c6a5754b602ec01f
Now that we have a framework for the SMCCC TRNG interface, and the
existing Juno entropy code has been prepared, add the few remaining bits
to implement this interface for the Juno Trusted Entropy Source.
We retire the existing Juno specific RNG interface, and use the generic
one for the stack canary generation.
Change-Id: Ib6a6e5568cb8e0059d71740e2d18d6817b07127d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Juno Trusted Entropy Source has a bias, which makes the generated
raw numbers fail a FIPS 140-2 statistic test.
To improve the quality of the numbers, we can use the CPU's CRC
instructions, which do a decent job on conditioning the bits.
This adds a *very* simple version of arm_acle.h, which is typically
provided by the compiler, and contains the CRC instrinsics definitions
we need. We need the original version by using -nostdinc.
Change-Id: I83d3e6902d6a1164aacd5060ac13a38f0057bd1a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Currently we use the Juno's TRNG hardware entropy source to initialise
the stack canary. The current function allows to fill a buffer of any
size, but we will actually only ever request 16 bytes, as this is what
the hardware implements. Out of this, we only need at most 64 bits for
the canary.
In preparation for the introduction of the SMCCC TRNG interface, we
can simplify this Juno specific interface by making it compatible with
the generic one: We just deliver 64 bits of entropy on each call.
This reduces the complexity of the code. As the raw entropy register
readouts seem to be biased, it makes sense to do some conditioning
inside the juno_getentropy() function already.
Also initialise the TRNG hardware, if not already done.
Change-Id: I11b977ddc5417d52ac38709a9a7b61499eee481f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Update TZC base address to align with the recent changes in the platform
memory map.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: I0d0ad528a2e236607c744979e1ddc5c6d426687a
Currently, BLs are mapping the GIC memory region as read-write
for all cores on boot-up.
This opens up the security hole where the active core can write
the GICR frame of fused/inactive core. To avoid this issue, disable
the GICR frame of all inactive cores as below:
1. After primary CPU boots up, map GICR region of all cores as
read-only.
2. After primary CPU boots up, map its GICR region as read-write
and initialize its redistributor interface.
3. After secondary CPU boots up, map its GICR region as read-write
and initialize its redistributor interface.
4. All unused/fused core's redistributor regions remain read-only and
write attempt to such protected regions results in an exception.
As mentioned above, this patch offers only the GICR memory-mapped
region protection considering there is no facility at the GIC IP
level to avoid writing the redistributor area.
These changes are currently done in BL31 of Arm FVP and guarded under
the flag 'FVP_GICR_REGION_PROTECTION'.
As of now, this patch is tested manually as below:
1. Disable the FVP cores (core 1, 2, 3) with core 0 as an active core.
2. Verify data abort triggered by manually updating the ‘GICR_CTLR’
register of core 1’s(fused) redistributor from core 0(active).
Change-Id: I86c99c7b41bae137b2011cf2ac17fad0a26e776d
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
GIC memory region is not getting used in BL1 and BL2.
Hence avoid its mapping in BL1 and BL2 that freed some
page table entries to map other memory regions in the
future.
Retains mapping of CCN interconnect region in BL1 and BL2
overlapped with the GIC memory region.
Change-Id: I880dd0690f94b140e59e4ff0c0d436961b9cb0a7
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
So far the ARM platform Makefile would require that RESET_TO_BL31 is set
when we ask for the ARM_LINUX_KERNEL_AS_BL33 feature.
There is no real technical reason for that, and the one place in the
code where this was needed has been fixed.
Remove the requirement of those two options to be always enabled
together.
This enables the direct kernel boot feature for the Foundation FVP
(as described in the documentation), which requires a BL1/FIP
combination to boot, so cannot use RESET_TO_BL31.
Change-Id: I6814797b6431b6614d684bab3c5830bfd9481851
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment we have the somewhat artifical limitation of
ARM_LINUX_KERNEL_AS_BL33 only being used together with RESET_TO_BL31.
However there does not seem to be a good technical reason for that,
it was probably just to differentate between two different boot flows.
Move the initial register setup for ARM_LINUX_KERNEL_AS_BL33 out of the
RESET_TO_BL31 #ifdef, so that we initialise the registers in any case.
This allows to use a preloaded kernel image when using BL1 and FIP.
Change-Id: I832df272d3829f077661f4ee6d3dd9a276a0118f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The structure has been modified to specify the memory
size in bytes instead of Gigabytes.
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: I3384677d79af4f3cf55d3c353b6c20bb827b5ae7
This patch removes the Neoverse N1 CPU errata workaround for
bug 1542419 as the bug is not present in Rainier R0P0 core.
Change-Id: Icaca299b13ef830b2ee5129576aae655a6288e69
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Increase the core count and add respective entries in DTS.
Add Klein assembly file to cpu sources for core initialization.
Add SCMI entries for cores.
Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>
Change-Id: I14dc1d87df6dcc8d560ade833ce1f92507054747
When building TF-A with USE_ROMLIB=1 and -j make options, the build fails with the following error:
make[1]: *** No rule to make target '/build/juno/debug/romlib/romlib.bin', needed by 'bl1_romlib.bin'.
This patch fixes that issue.
Signed-off-by: Zelalem <zelalem.aweke@arm.com>
Change-Id: I0cca416f3f50f400759164e0735c2d6b520ebf84
AMU counters are used for monitoring the CPU performance. RD-N2 platform
has architected AMU available for each core. Enable the use of AMU by
non-secure OS for supporting the use of counters for processor
performance control (ACPI CPPC).
Change-Id: I5cc749cf63c18fc5c7563dd754c2f42990a97e23
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
AMU counters are used for monitoring the CPU performance. RD-V1 platform
has architected AMU available for each core. Enable the use of AMU by
non-secure OS for supporting the use of counters for processor
performance control (ACPI CPPC).
Change-Id: I4003d21407953f65b3ce99eaa8f496d6052546e0
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Some of the PSCI platform callbacks were restricted on RD-V1 platform
because the idle was not functional. Now that it is functional, remove
all the restrictions on the use PSCI platform callbacks.
Change-Id: I4cb97cb54de7ee166c30f28df8fea653b6b425c7
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
The issue is that, when interrupt is triggered and RAS handler
is entered, after interrupt handler finishes, TF-A will re-enter
bl32 and then crash.
sdei_dispatch_event() may return failing result in some cases,
for example kernel may not have registered a handler or RAS event
may happen early during boot. We restore the NS context when
sdei_dispatch_event() returns failing result.
error log :
Received delegated event
X0 : 0xC4000061
X1 : 0x0
X2 : 0x0
X3 : 0x0
Received event - 0xC4000061 on cpu 0
UnRecognized Event - 0xC4000061
Failed delegated event 0xC4000061, Status Invalid Parameter
Unhandled Exception in EL3.
x30 = 0x000000000401f700
x0 = 0xfffffffffffffffe
x1 = 0xfffffffffffffffe
x2 = 0x00000000600003c0
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: I9802e9a32eee0ac3b5a8bcc0362d0b0e3b71dc9f
Turn ON/OFF GIC redistributor in sync with GIC CPU interface ON/OFF.
Issue :
The Linux prompt hangs when all the cores in a cluster are turned OFF
and we try to turn ON a core in that cluster. Previously when TF-A turns
ON a core, TF-A first turns ON the redistributor followed by the core.
This did not match the flow when turning OFF a core, as TF-A did not
turn OFF redistributor when the corresponding core[s] are disabled.
This hang is resolved by disabling redistributor as cores are disabled,
keeping them in sync.
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Change-Id: Ifd04fdcfd47b45e00f874f15b098471883d023f0
Reference Design platform RD-Daniel-ConfigXLR has been renamed to
RD-V1-MC. Correspondingly, remove all uses of 'rddanielxlr' and replace
it with 'rdv1mc' where appropriate.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I5d91c69738397b19ced43949b4080c74678e604c
Reference Design platform RD-Daniel has been renamed to RD-V1.
Correspondingly, remove all uses of 'rddaniel' and replace it with
'rdv1' where appropriate.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I1702bab39c501f8c0a09df131cb2394d54c83bcf
Only non-file targets should be set a .PHONY. Otherwise if file target is
set as .PHONY then targets which depends on those file .PHONY targets would
be always rebuilt even when their prerequisites are not changed.
File target which needs to be always rebuilt can be specified in Make
system via having a prerequisite on some .PHONY target, instead of marking
whole target as .PHONY. In Makefile projects it is common to create empty
.PHONY target named FORCE for this purpose.
This patch changes all file targets which are set as .PHONY to depends on
new .PHONY target FORCE, to ensure that these file targets are always
rebuilt (as before). Basically they are those targets which calls external
make subprocess.
After FORCE target is specified in main Makefile, remove it from other
Makefile files to prevent duplicate definitions.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iee3b4e0de93879b95eb29a1745a041538412e69e
RD-N2 platform has been updated to use six GIC ITS blocks. This results
in change in base address of the GIC Redistributor to accomodate two
new GIC ITS blocks. Update the base address of GICR to reflect the same.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: I740a547328fb9a9f25d7a09c08e61bdbc8bf781c
This patch adds support to enable OP-TEE as S-EL1 SP with SPMC at S-EL2
- create SPMC manifest file with OP-TEE as SP
- add support for ARM_SPMC_MANIFEST_DTS build option
- add optee entry with ffa as method in tc0.dts
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Ia9b5c22c6f605d3886914bbac8ac45e8365671cb
* changes:
doc: Update list of supported FVP platforms
board/rdn2: add board support for rdn2 platform
plat/arm/sgi: adapt to changes in memory map
plat/arm/sgi: add platform id value for rdn2 platform
plat/arm/sgi: platform definitions for upcoming platforms
plat/arm/sgi: refactor header file inclusions
plat/arm/sgi: refactor the inclusion of memory mapping
Add the initial board support for RD-N2 platform.
Change-Id: I8325885bf248dd92191d6fc92a2da91c23118f8c
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Upcoming RD platforms will have an updated memory map for the various
pheripherals on the system. So, for the newer platforms, handle the
memory mapping and other platform specific functionality separately
from the existing platforms.
Change-Id: Iab1355a4c8ea1f6db4f79fcdd6eed907903b6a18
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
In preparation for adding the board support for RD-N2 platform, add
macros to define the platform id and the corresponding SCMI platform
info for the RD-N2 platform.
Change-Id: Ie764ae618732b39e316f7ed080421f5d79adab21
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Upcoming RD platforms have changes in the SOC address map from that
of the existing platforms. As a prepartory step to add support for the
upcoming platforms, create platform definitions for those platforms.
Change-Id: Ic5df9fed02c44e65ec260bbb5efc1b8dbd919a56
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Upcoming RD platforms have deviations in various definitions of
platform macros from that of the exisiting platforms. In preparation
for adding support for those upcoming RD platforms, refactor the
header file inclusion to allow newer platforms to use a different
set of platform macros.
Change-Id: Ic80283ddadafaa7f766f300652cb0d4e507efdb6
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Upcoming RD platforms have a different memory map from those of the
existing platforms. So make the build of the existing mmap entries to be
usable only for existing platforms and let upcoming platforms define
a different set of mmap entries.
Change-Id: Id1ef0293efe8749c78a99237e78d32573c7233aa
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
The primary VM concept is removed from the SPMC.
Update the SPMC manifests with number of Execution Contexts
and SP workspace size for the first Secure Partition (as it
is done for NWd secondary VMs and other SPs).
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I3b9c52666f7dfe74ab1f7d2148ad0070ee44b54e
The chosen node is no longer required as the SPMC implements
a specific boot flow which no longer requires this node.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ib566b602a7f83003a1b2d0ba5f6ebf4d8b7a9156
Olivier Deprez
Madhukar Pappireddy
Sandrine Bailleux
Usama Arif
bipin.ravi
johpow01
Aditya Angadi
Andre Przywara
Vijayenthiran Subramaniam
Manish V Badarkhe
Manoj Kumar
Lauren Wehrmeister
Manish Pandey
Avinash Mehta
Zelalem
Pranav Madhu
Ming Huang
Jagadeesh Ujja
Pali Rohár
Arunachalam Ganapathy