Tegra SoCs would like the flexibility to perform chip specific actions
before we complete cold boot. This patch introduces a platform specific
'runtime_setup' handler to provide that flexibility.
Change-Id: I13b2489f631f775cae6f92acf51a240cd036ef11
Signed-off-by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>
The TEGRA_GICv2_SOURCES contains the list of GIC sources required
to compile the GICv2 support for platforms.
This patch includes the TEGRA_GICv2_SOURCES macro from individual
makefiles to allow future platforms to use suport for GICv3.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I429b1a0c7764ab370675f873a50cecda871110cb
TZDRAM setup is not required for all Tegra SoCs. The previous bootloader
can enable the TZDRAM fence due to architectural improvements in the
newer chips.
This patch moves the TZDRAM setup to early_boot handlers for SoCs to
handle this scenario.
Change-Id: I6481b4f848a4dadc20cb83852cd8e19a242b3a34
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch verifies that the binary image is compatible with
chip ID of the platform.
Change-Id: I28db221b4442aa8827a092faadf32f110d7c5cb4
Signed-off-by: kalyanic <kalyanic@nvidia.com>
This patch moves the 'drivers' and the 'lib' folders out of the
'common' folder. This way the 'common' folder shall contain only
the platform support required for all Tegra platforms.
Change-Id: I2f238572d0a078d60c6b458a559538dc8a4d1856
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables SDEI support for all Tegra platforms, with
the following configuration settings.
* SGI 8 as the source IRQ
* Special Private Event 0
* Three private, dynamic events
* Three shared, dynamic events
* Twelve general purpose explicit events
Verified using TFTF SDEI test suite.
******************************* Summary *******************************
Test suite 'SDEI' Passed
=================================
Tests Skipped : 0
Tests Passed : 5
Tests Failed : 0
Tests Crashed : 0
Total tests : 5
=================================
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I1922069931a7876a4594e53260ee09f2e4f09390
This patch enables the Exception Handling Framework to service the WDT
interrupts on all Tegra platforms.
Verified that the watchdog timer interrupt fires after migrating to
the EHF.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I6b2e33da7841aa064e3a8f825c26fadf168cd0d5
Hotplug poweron is not working for boot CPU as it's being
triggerred using PMC and not with Flow Controller. This is
happening because "cpu_powergate_mask" is only getting set
for non-boot CPU's as the boot CPU's first bootup follows
different code path. The patch is marking a CPU as ON within
"cpu_powergate_mask" when turning its power domain on
during power on. This will ensure only first bootup on all
CPU's is using PMC and subsequent hotplug poweron will be
using Flow Controller.
Change-Id: Ie9e86e6f9a777d41508a93d2ce286f31307932c2
Signed-off-by: sumitg <sumitg@nvidia.com>
This patch modifies PLAT_INCLUDES to include individual Tegra SoC
headers from the platform's makefile.
Change-Id: If5248667f4e58ac18727d37a18fbba8e53f2d7b5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch renames 'ENABLE_WDT_LEGACY_FIQ_HANDLING' macro to
'ENABLE_TEGRA_WDT_LEGACY_FIQ_HANDLING', to indicate that this
is a Tegra feature.
Change-Id: I5c4431e662223ee80efbfd5ec2513f8b1cadfc50
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
In SE suspend, switch SE clock source to CLK_M,
to make sure SE clock is on when saving SE context
Change-Id: I57c559825a3ec8e0cc35f7a389afc458a5eed0cb
Signed-off-by: Leo He <leoh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The platform sip is reporting a "unsupported function ID" if the
smc function id is not pmc command. When actually the smc function id
could be specific to the tegra sip handler.
This patch removes the error reported.
Change-Id: Ia3c8545d345746c5eea6d75b9e6957ca23ae9ca3
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
ERRATA_A57_829520 disables "indirect branch prediction" for
EL1 on cpu reset, leading to 15% drop in CPU performance
with coremark benchmarks.
Tegra210 already has a hardware fix for ARM BUG#829520,so
this errata is not needed.
This patch disables the errata to get increased performance
numbers.
Change-Id: I0b42e8badd19a8101f6a55d80eb2d953597d3c20
Signed-off-by: Mithun Maragiri <mmaragiri@nvidia.com>
Tegra210B01 SoCs support atomic context save for the two SE
hardware engines. Tegra210 SoCs have support for only one SE
engine and support a software based save/restore mechanism
instead.
This patch updates the SE driver to make this change.
Change-Id: Ia5e5ed75d0fe011f17809684bbc2ed2338925946
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Update the list to include PMC registers that the NS world cannot
access even with smc calls.
Change-Id: I588179b56ebc0c29200b55e6d61535fd3a7a3b7e
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I5c2fe3b6a667acf80c808cfec4a64059a2c9c25f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tegra210 SoCs need the sc7entry-fw to enter System Suspend mode,
but there might be certain boards that do not have this firmware
blob. To stop the NS world from issuing System suspend entry
commands on such devices, we ned to disable System Suspend from
the PSCI "features".
This patch removes the System suspend handler from the Tegra PSCI
ops, so that the framework will disable support for "System Suspend"
from the PSCI "features".
Original change by: kalyani chidambaram <kalyanic@nvidia.com>
Change-Id: Ie029f82f55990a8b3a6debb73e95e0e218bfd1f5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch sets the "secure" bit to mark the PMC hardware block
as accessible only from the secure world. This setting must be
programmed during cold boot and System Resume.
The sc7entry-fw, running on the COP, needs access to the PMC block
to enter System Suspend state, so "unlock" the PMC block before
passing control to the COP.
Change-Id: I00e39a49ae6b9f8c8eafe0cf7ff63fe6a67fdccf
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>
The PMC hardware block resume handler was called for Tegra210
platforms, only if the sc7entry-fw was present on the device.
This would cause problems for devices that do not support this
firmware.
This patch fixes this logic and resumes the PMC block even if
the sc7entry-fw is not present on the device.
Change-Id: I6f0eb7878126f624ea98392f583ed45a231d27db
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
The PMC driver is used only by Tegra210 and Tegra132 platforms. This
patch removes pmc.c from the common makefile and moves it to the
platform specific makefiles.
As a result, the PMC code from common code has been moved to Tegra132
and Tegra210 platform ports.
Change-Id: Ia157f70e776b3eff3c12eb8f0f02d30102670a98
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes all the weakly defined PSCI handlers defined
per-platform, to improve code coverage numbers and reduce MISRA
defects.
Change-Id: I0f9c0caa0a6071d0360d07454b19dcc7340da8c2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch converts the weakly defined platform setup handlers into
actual platform specific handlers to improve code coverage numbers
and some MISRA defects.
The weakly defined handlers never get executed thus resulting in
lower coverage - function, function calls, statements, branches
and pairs.
Change-Id: I02f450f66b5754a90d934df4d76eb91459fca5f9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch introduces the 'plat_enable_console' handler to allow
the platform to enable the right console. Tegra194 platform supports
multiple console, while all the previous platforms support only one
console.
For Tegra194 platforms, the previous bootloader checks the platform
config and sets the uart-id boot parameter, to 0xFE. On seeing this
boot parameter, the platform port uses the proper memory aperture
base address to communicate with the SPE. This functionality is
currently protected by a platform macro, ENABLE_CONSOLE_SPE.
Change-Id: I3972aa376d66bd10d868495f561dc08fe32fcb10
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Now it is needed to use the full path of the common header files.
Commit 09d40e0e08 ("Sanitise includes across codebase") provides more
information.
Change-Id: Ifedc79d9f664d208ba565f5736612a3edd94c647
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This patch dynamically maps the first page of trusty's code memory,
before accessing it to find out if we are running a 32-bit or 64-bit
image.
On Tegra platforms, this means we have to increase the mappings to
accomodate the new memmap entry.
Change-Id: If370d1e6cfcccd69b260134c1b462d8d17bee03d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch initilises the per-CPU GIC bits during cold boot and
secondary CPU power up. Commit 80c50ee accidentally left out this
part.
Change-Id: I73ce59dbc83580a84b827cab89fe7e1f65f9f130
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Platforms that do not support bpmp firmware, do not need access
to the PMC block from outside of the CPU complex. The agents
running on the CPU can always access the PMC through the EL3
exception space.
This patch restricts non-secure world access to the PMC block on
such platforms.
Change-Id: I2c4318dc07ddf6407c1700595e0f4aac377ba258
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch toggles the ring oscillator state across cluster idle
as DFLL loses its state. We dont want garbage values being written
to the pmic when we enter cluster idle state, so enable "open loop"
when we enter CC6 and restore the state to "closed loop" on exit.
Change-Id: I56f4649f57bcc651d6c415a6dcdc978e9444c97b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch clears the PMC's DPD registers on resuming from System
Suspend, for all Tegra210 platforms that support the sc7entry-fw.
Change-Id: I7881ef0a5f609ed28b158bc2f4016abea3c7f305
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>
The BPMP firmware takes some time to initialise its state on exiting
System Suspend state. The CPU needs to synchronize with the BPMP during
this process to avoid any race conditions. This patch suspends and resumes
the BPMP interface across a System Suspend cycle, to fix this race.
Change-Id: I82a61d12ef3eee267bdd8d4386bed23397fbfd2d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch skips past the signature header added to the sc7entry-fw
binary by the previous level bootloader. Currently, the size of
the header is 1KB, so adjust the start address and the binary size
at the time of copy.
Change-Id: Id0494548009749035846d54df417a960c640c8f9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch uses the sc7entry-fw base/size values to calculate the
TZDRAM fence, so as to move sc7entry-fw inside the TZDRAM fence.
Change-Id: I91aeeeece857076c478cdc4c18a6ad70dc265031
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds SiP handler for Tegra210 platforms to service
read/write requests for PMC block. None of the secure registers
are accessible to the NS world though.
Change-Id: I7dc1f10c6a6ee6efc642ddcfb1170fb36d3accff
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>
This patch puts all the DMA masters in reset before starting the System
Suspend sequence. This helps us make sure that there are no rogue agents
in the system trying to over-write the SC7 Entry Firmware with their own.
Change-Id: I7eb39999d229951e612fbfeb9f86c4efb8f98b5a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to enter System Suspend on Tegra210 platforms
without the traditional BPMP firmware. The BPMP firmware will no longer
be supported on Tegra210 platforms and its functionality will be
divided across the CPU and sc7entry-fw.
The sc7entry-fw takes care of performing the hardware sequence required
to enter System Suspend (SC7 power state) from the COP. The CPU is required
to load this firmware to the internal RAM of the COP and start the sequence.
The CPU also make sure that the COP is off after cold boot and is only
powered on when we want to start the actual System Suspend sequence.
The previous bootloader loads the firmware to TZDRAM and passes its base and
size as part of the boot parameters. The EL3 layer is supposed to sanitize
the parameters before touching the firmware blob.
To assist the warmboot code with the PMIC discovery, EL3 is also supposed to
program PMC's scratch register #210, with appropriate values. Without these
settings the warmboot code wont be able to get the device out of System
Suspend.
Change-Id: I5a7b868512dbfd6cfefd55acf3978a1fd7ebf1e2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes support for powering down a CPU cluster on
Tegra210 platforms as none of them actually use it.
Change-Id: I9665634cf2b5b7b8a1b5a2700cae152dc9165fe3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to enter/exit to/from cluster idle power
state on Tegra210 platforms that do not load BPMP firmware.
The CPU initates the cluster idle sequence on the last standing
CPU, by following these steps:
Entry
-----
* stop other CPUs from waking up
* program the PWM pinmux to tristate for OVR PMIC
* program the flow controller to enter CC6 state
* skip L1 $ flush during cluster power down, as L2 $ is inclusive
of L1 $ on Cortex-A57 CPUs
Exit
----
* program the PWM pinmux to un-tristate for OVR PMIC
* allow other CPUs to wake up
This patch also makes sure that cluster idle state entry is not
enabled until CL-DVFS is ready.
Change-Id: I54cf31bf72b4a09d9bf9d2baaed6ee5a963c7808
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the watchdog timer's interrupt as an FIQ
interrupt to the CPU. The interrupt generated by the watchdog
is connected to the flow controller for power management reasons,
and needs to be routed to the GICD for it to reach the CPU.
Change-Id: I9437b516da2c5d763eca72694ed7f3c7389b3d9e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to handle secure PPIs for Tegra watchdog timers. This
functionality is currently protected by the ENABLE_WDT_LEGACY_FIQ_HANDLING
configuration variable and is only enabled for Tegra210 platforms, for now.
Change-Id: I0752ef54a986c58305e1bc8ad9be71d4a8bbd394
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch includes the console driver from individual platform
makefiles and removes it from tegra_common.mk. This allows future
platforms to include consoles of their choice.
Change-Id: I7506562bfac78421a80fb6782ac8472fbef6cfb0
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch returns error if BPMP initialization fails. The platform
code marks the cluster as "runnning" since we wont be able to get
it into the low power state without BPMP.
Change-Id: I86f51d478626240bb7b4ccede8907674290c5dc1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
If ECID is valid, we can use force instantiation
otherwise, we should use reseed for random data
generation for RNG operations in SE context save
DNI because we are not keeping software save
sequence in main.
Change-Id: I73d650e6f45db17b780834b8de4c10501e05c8f3
Signed-off-by: Samuel Payne <spayne@nvidia.com>
This change ports the software based SE context save routines.
The software implements the context save sequence for SE/SE2 and
PKA1. The context save routine is intended to be invoked from
the ATF SC7 entry.
Change-Id: I9aa156d6e7e22a394bb10cb0c3b05fc303f08807
Signed-off-by: Marvin Hsu <marvinh@nvidia.com>
This patch increases the MAX_MMAP_REGIONS build flag to allow
Tegra210 platforms to dynamically map multiple memory apertures
at the same time. This takes care of scenarios when we get multiple
requests to memmap memory apertures at the same time.
Change-Id: If4fe23b454e7d588e35acfbf024b9ccbb3daccc7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
MISRA Rule 10.3, the value of an expression shall not be assigned to
an object with a narrower essential type or of a different essential
type category.
The essential type of a enum member is anonymous enum, the enum member
should be casted to the right type when using it.
Both UL and ULL suffix equal to uint64_t constant in compiler
aarch64-linux-gnu-gcc, to avoid confusing, only keep U and ULL suffix
in platform code. So in some case, cast a constant to uint32_t is
necessary.
Change-Id: I1aae8cba81ef47481736e7f95f53570de7013187
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
This patch saves the TZSRAM context and takes the SoC into System Suspend
from the "_wfi" handler. This helps us save the entire CPU context from
the TZSRAM, before entering System Suspend. In the previous implementation
we missed saving some part of the state machine context leading to an assert
on System Suspend exit.
Change-Id: I4895a8b4a5e3c3e983c245746ea388e42da8229c
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
This patch enables clocks to the SE and Entropy block and gets them
out of reset, before starting the context save operation.
Change-Id: Ic196be8fb833dfd04c0e8d460c07058429999613
Signed-off-by: Samuel Payne <spayne@nvidia.com>