This patch moves the MHZ_TICKS_PER_SEC macro to utils_def.h
for other platforms to use.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I6c4dc733f548d73cfdb3515ec9ad89a9efaf4407
This patch locks most of the stream id security config registers as
per HW guidance.
This patch keeps the stream id configs unlocked for the following
clients, to allow some platforms to still function, until they make
the transition to the latest guidance.
- ISPRA
- ISPFALR
- ISPFALW
- ISPWA
- ISPWA1
- ISPWB
- XUSB_DEVR
- XUSB_DEVW
- XUSB_HOSTR
- XUSB_HOSTW
- VIW
- VIFALR
- VIFALW
Change-Id: I66192b228a0a237035938f498babc0325764d5df
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
The PMC hardware block resume handler was called for Tegra210
platforms, only if the sc7entry-fw was present on the device.
This would cause problems for devices that do not support this
firmware.
This patch fixes this logic and resumes the PMC block even if
the sc7entry-fw is not present on the device.
Change-Id: I6f0eb7878126f624ea98392f583ed45a231d27db
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
This patch adds the macro to enable legacy FIQ handling to the common
Tegra makefile. The default value of this macro is '0'. Platforms that
need this support should enable it from their makefiles.
This patch also helps fix violation of Rule 20.9.
Rule 20.9 "All identifiers used in the controlling expression of #if
of #elif preprocessing directives shall be #define'd before
evaluation"
Change-Id: I4f0c9917c044b5b1967fb5e79542cd3bf6e91f18
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Fix mailbox driver incompatible cast bug and control flow issue that
was flagged by Coverity Scan.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3f34e98d24e40139d31cf7d5b9b973cd2d981065
Use CREATE_SEQ helper macro to create sequence of valid chip counts
instead of manually creating the sequence. This allows a scalable
approach to increase the valid chip count sequence in the future.
Change-Id: I5ca7a00460325c156b9e9e52b2bf656a2e43f82d
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
When TF-A is built with RESET_TO_BL31=1 option, BL31 is the
first image to be run and should have all the memory allocated
to it except for the memory reserved for Shared RAM at the start
of Trusted SRAM.
This patch fixes FVP BL31 load address and its image size for
RESET_TO_BL31=1 option. BL31 startup address should be set to
0x400_1000 and its maximum image size to the size of Trusted SRAM
minus the first 4KB of shared memory.
Loading BL31 at 0x0402_0000 as it is currently stated in
'\docs\plat\arm\fvp\index.rst' causes EL3 exception when the
image size gets increased (i.e. building with LOG_LEVEL=50)
but doesn't exceed 0x3B000 not causing build error.
Change-Id: Ie450baaf247f1577112f8d143b24e76c39d33e91
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Adding support for 32MHz UART clock and selecting it as the
default UART clock
Change-Id: I9541eaff70424e85a3b5ee4820ca0e7efb040d2c
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Running checkpatch.pl on the codebase and making required changes
Change-Id: I7d3f8764cef632ab2a6d3c355c68f590440b85b8
Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Note: This patch implements in-band messaging protocol only.
ARM has launched a next version of MHU i.e. MHUv2 with its latest
subsystems. The main change is that the MHUv2 is now a distributed IP
with different peripheral views (registers) for the sender and receiver.
Another main difference is that MHUv1 duplex channels are now split into
simplex/half duplex in MHUv2. MHUv2 has a configurable number of
communication channels. There is a capability register (MSG_NO_CAP) to
find out how many channels are available in a system.
The register offsets have also changed for STAT, SET & CLEAR registers
from 0x0, 0x8 & 0x10 in MHUv1 to 0x0, 0xC & 0x8 in MHUv2 respectively.
0x0 0x4 0x8 0xC 0x1F
------------------------....-----
| STAT | | | SET | | |
------------------------....-----
Transmit Channel
0x0 0x4 0x8 0xC 0x1F
------------------------....-----
| STAT | | CLR | | | |
------------------------....-----
Receive Channel
The MHU controller can request the receiver to wake-up and once the
request is removed, the receiver may go back to sleep, but the MHU
itself does not actively put a receiver to sleep.
So, in order to wake-up the receiver when the sender wants to send data,
the sender has to set ACCESS_REQUEST register first in order to wake-up
receiver, state of which can be detected using ACCESS_READY register.
ACCESS_REQUEST has an offset of 0xF88 & ACCESS_READY has an offset
of 0xF8C and are accessible only on any sender channel.
This patch adds necessary changes in a new file required to support the
latest MHUv2 controller. This patch also needs an update in DT binding
for ARM MHUv2 as we need a second register base (tx base) which would
be used as the send channel base.
Change-Id: I1455e08b3d88671a191c558790c503eabe07a8e6
Signed-off-by: Tushar Khandelwal <tushar.khandelwal@arm.com>
Use space after #define consistently, drop useless parenthesis,
no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I72846d8672cab09b128e3118f4b7042a5a9c0df5
This patch changes the destination address of BL31 and BL32 From
fixed address for getting from the each certificates.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> # upstream rework
Change-Id: Ide11776feff25e6fdd55ab28503a15b658b2e0d5
* changes:
uniphier: make I/O register region configurable
uniphier: make PSCI related base address configurable
uniphier: make counter control base address configurable
uniphier: make UART base address configurable
uniphier: make pinmon base address configurable
uniphier: make NAND controller base address configurable
uniphier: make eMMC controller base address configurable
Adding support for generating a semi-random number required for
enabling building TF-A with stack protector support.
TF-A for corstone-700 may now be built using ENABLE_STACK_PROTECTOR=all
Change-Id: I03e1be1a8d4e4a822cf286f3b9ad4da4337ca765
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
* changes:
uniphier: extend boot device detection for future SoCs
uniphier: change block_addressing flag to bool
uniphier: change the return value type of .is_usb_boot() to bool
The I/O register region will be changed in the next SoC. Make it
configurable.
Change-Id: Iec0cbd1ef2d0703ebc7c3d3082edd73791bbfec9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The next SoC will have:
- No boot swap
- SD boot
- No USB boot
Add new fields to handle this.
Change-Id: I772395f2c5dfc612e575b0cbd0657a5fa9611c25
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The register base address will be changed in the next SoC. Make it
configurable.
Change-Id: Ibe07bd9db128b0f7e629916cb6ae21ba7984eca9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The flag, uniphier_emmc_block_addressing, is boolean logic, so
"bool' is more suitable.
uniphier_emmc_is_over_2gb() is not boolean - it returns 1 / 0
depending on the card density, or a negative value on failure.
Rename it to make it less confusing.
Change-Id: Ia646b1929147b644e0df07c46b54ab80548bc3bd
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The register base will be changed in the next SoC. Make it
configurable.
Change-Id: I4a7cf85fe50e4d71db58a3372a71774e43193bd3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This is boolean logic, so "bool" is more suitable.
Change-Id: I439c5099770600a65b8f58390a4c621c2ee487a5
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The next SoC supports the same UART, but the register base will be
changed. Make it configurable.
Change-Id: Ida5c9151b2f3554afd15555b22838437eef443f7
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The register base will be changed in the next SoC. Make it
configurable.
Change-Id: I9fbb6bdd1cf06207618742d4ad7970d911c9bc26
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The next SoC does not support the NAND controller, but make the base
address configurable for consistency and future proof.
Change-Id: I776e43ff2b0408577919b0b72849c3e1e5ce0758
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The next SoC supports the same eMMC controller, but the register
base will be changed. Make it configurable.
Change-Id: I00cb5531bc3d8d49357ad5e922cdd3d785355edf
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Forced hash generation used to always generate hash via RSA encryption.
This patch changes encryption based on ARM_ROTPK_LOCATION.
Also removes setting KEY_ALG based on ARM_ROTPL_LOCATION - there is no
relation between these two.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: Id727d2ed06176a243719fd0adfa0cae26c325005
* changes:
SPMD: enable SPM dispatcher support
SPMD: hook SPMD into standard services framework
SPMD: add SPM dispatcher based upon SPCI Beta 0 spec
SPMD: add support to run BL32 in TDRAM and BL31 in secure DRAM on Arm FVP
SPMD: add support for an example SPM core manifest
SPMD: add SPCI Beta 0 specification header file
This patch adds support to the build system to include support for the SPM
dispatcher when the SPD configuration option is spmd.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: Ic1ae50ecd7403fcbcf1d318abdbd6ebdc642f732
This patch reserves and maps the Trusted DRAM for SPM core execution.
It also configures the TrustZone address space controller to run BL31
in secure DRAM.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: I7e1bb3bbc61a0fec6a9cb595964ff553620c21dc
This patch repurposes the TOS FW configuration file as the manifest for
the SPM core component which will reside at the secure EL adjacent to
EL3. The SPM dispatcher component will use the manifest to determine how
the core component must be initialised. Routines and data structure to
parse the manifest have also been added.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: Id94f8ece43b4e05609f0a1d364708a912f6203cb
* changes:
plat/arm: add board support for rd-daniel platform
plat/arm/sgi: move GIC related constants to board files
platform/arm/sgi: add multi-chip mode parameter in HW_CONFIG dts
board/rdn1edge: add support for dual-chip configuration
drivers/arm/scmi: allow use of multiple SCMI channels
drivers/mhu: derive doorbell base address
plat/arm/sgi: include AFF3 affinity in core position calculation
plat/arm/sgi: add macros for remote chip device region
plat/arm/sgi: add chip_id and multi_chip_mode to platform variant info
plat/arm/sgi: move bl31_platform_setup to board file
Varun Wadekar
Pritesh Raithatha
kalyani chidambaram
Sandrine Bailleux
Abdul Halim, Muhammad Hadi Asyrafi
Vijayenthiran Subramaniam
Manish Pandey
Alexei Fedorov
Vishnu Banavath
Avinash Mehta
Khandelwal
Marek Vasut
Yoshifumi Hosoya
Toshiyuki Ogasahara
Morten Borup Petersen
Louis Mayencourt
joanna.farley
Masahiro Yamada
Max Shvetsov
Olivier Deprez
Mark Dykes
Achin Gupta
Aditya Angadi