This commit fixes the wrong memory type, secure NOR flash
shall be mapped as MT_DEVICE.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I9c9ed51675d84ded675bb56b2e4ec7a08184c602
sbsa-ref in QEMU may create up to 512 cores.
This commit prepares the MP information to support 512 cores.
The number of xlat tables for spm_mm is also increased.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I2788eaf6d14e188e9b5d1102d359b2899e02df7c
Secure pl061 qemu driver allows to rize the GPIO pin
from the secure world to reboot and power down
virtual machine.
Do not define secure-gpio for sbsa-ref platform due to
reboot is done via sbsa-ec watchdog.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Change-Id: I508d7c5cf4c75cb169b34b00682a76f6761d3869
This allows PSCI in TF-A to signal platform power states to QEMU
via a controller in secure space.
This required a sbsa-ref specific version of PSCI functions for the
platform. Also adjusted the MMU range to also include the new EC.
Add a new MMU region for the embedded controller and increase the
size of xlat tables by one for the new region.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: Iece8a88947f11e82ab8988e460a8a66ad175a5ee
sbsa-ref in QEMU creates clusers of 8 cores, it may create up to 512
cores in upto 64 clusters. Implement a qemu_sbsa specific topology file
and increase the BL31_SIZE to accommodate the bigger table sizes. Change
platform_def.h for new topology. Correct PLATFORM_CPU_PER_CLUSTER_SHIFT so
plat_helpers.S calculates correct result.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: Idc5d70394c0956b759ad2c86f9fda8f293f2cfa7
DEVICE2 is not currently used on qemu platform but is needed for
a future patch for qemu_sbsa platform. Change its definition to
RW and add it to all levels of arm-tf similar to DEVICE1 definition.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: I03495471bfd423b61ad44ec4953fb25f76aa54bf
Rather than re-create this file in multiple qemu variants instead
caclulate the shift needed to convert MPIDR to position.
Add a new PLATFORM_CPU_PER_CLUSTER_SHIFT define in platform_def.h
for both qemu and qemu_sbsa to enable this calculation.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: I0e3a86354aa716d95150a3a34b15287cd70c8fd2
When getting a stack protector canary value, check
if cpu supports FEAT_RNG and use that. Fallback to
old method of using a (hardcoded value ^ timer).
Signed-off-by: Tomas Pilar <tomas@nuviainc.com>
Change-Id: I8181acf8e31661d4cc82bc3a4078f8751909e725
This implements support for UEFI secure variable storage
using standalone MM framework on qemu_sbsa platform.
Non-secure shared memory between UEFI and standalone MM
is allocated at the top of DRAM.
DRAM size of qemu_sbsa varies depends on the QEMU parameter,
so the non-secure shared memory is allocated by trusted firmware
and passed the base address and size to UEFI through device tree
"/reserved-memory" node.
Change-Id: I367191f408eb9850b7ec7761ee346b014c539767
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Increase SHARED_RAM_SIZE in sbsa_qemu platform from 4KB to 8KB.
sbsa_qemu uses SHARED_RAM for mail box and hold state of each cpus. If
qemu is configured with 512 cpus, region size used by qemu is greater
than 4KB.
Signed-off-by: Masato Fukumori <masato.fukumori@linaro.org>
Change-Id: I639e44e89335249d385cdc339350f509e9bd5e36
Include libraries needed to emulate Cortex-A72 on
sbsa-ref target of QEMU.
Signed-off-by: Tanmay Jagdale <tanmay.jagdale@linaro.org>
Change-Id: I98cf17b1662c70898977a841af07e07b5cfca8ba
The qemu_sbsa platform uses 42bit address size but
the cortex-a53 only supports 40bit addressing, the
cpu is incompatible with the platform.
The aem_generic is also not used with qemu_sbsa, in
fact, the platform currently only properly supports
the cortex-a57 cpu.
Change-Id: I91c92533116f1c3451d01ca99824e91d3d58df14
Signed-off-by: Tomas Pilar <tomas@nuviateam.com>
And from crash_console_flush.
We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.
Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Coverity build periodically throws below errors(non-consistently)
for 'QEMU' and 'RPI3' platforms.
/bin/sh: 1: cannot create build/qemu/debug/rot_key.pem: Directory
nonexistent
plat/qemu/qemu/platform.mk:86: recipe for target 'build/qemu/debug/
rot_key.pem' failed
make: *** [build/qemu/debug/rot_key.pem] Error 2
/bin/sh: 1: cannot create /work/workspace/workspace/tf-coverity/build
/rpi3/debug/rot_key.pem: Directory nonexistent
plat/rpi/rpi3/platform.mk:214: recipe for target '/work/workspace/
workspace/tf-coverity/build/rpi3/debug/rot_key.pem' failed
make: *** [/work/workspace/workspace/tf-coverity/build/rpi3/debug/
rot_key.pem] Error 2
Issue seems to be occurred when 'ROT key' is generated before creating
the platform build folder(for e.g.build/qemu/debug).
Changes are made to fix this issue by adding orderly dependancy of
the platform folder for the 'ROT key' creation which ensures that
platform folder is created before generating 'ROT key'.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I20c82172dde84e4c7f2373c0bd095d353f845d38
Enable the spm_mm framework for the qemu_sbsa platform.
Memory layout required for spm_mm is created in secure SRAM.
Co-developed-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I104a623e8bc1e44d035b95f014a13b3f8b33a62a
64KB was not enouth to handle fdt, bl2 shows
following error message.
"ERROR: Invalid Device Tree at 0x10000000000: error -3"
This patch increases the size to 1MB to address above error.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I0726a0cea95087175451da0dba7410acd27df808
CoT used for BL1 and BL2 are moved to tbbr_cot_bl1.c
and tbbr_cot_bl2.c respectively.
Common CoT used across BL1 and BL2 are moved to
tbbr_cot_common.c.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2252ac8a6960b3431bcaafdb3ea4fb2d01b79cf5
This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.
NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.
Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch provides separation of GICD, GICR accessor
functions and adds new macros for GICv3 registers access
as a preparation for GICv3.1 and GICv4 support.
NOTE: Platforms need to modify to include both
'gicdv3_helpers.c' and 'gicrv3_helpers.c' instead of the
single helper file previously.
Change-Id: I1641bd6d217d6eb7d1228be3c4177b2d556da60a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Enable encryption IO layer to be stacked above FIP IO layer for optional
encryption of Bl31 and BL32 images in case ENCRYPT_BL31 or ENCRYPT_BL32
build flag is set.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I24cba64728861e833abffc3d5d9807599c49feb6
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I7a23327394d142af4b293ea7ccd90b843c54587c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Commit 8f73663b59 ("plat/arm: Support for Cortex A5 in FVP Versatile
Express platform") has conditioned the enabling of the Advanced SIMD
and floating point features to platforms that have:
(ARM_ARCH_MAJOR > 7) || defined(ARMV7_SUPPORTS_VFP)
QEMU does support VFP so it should set ARMV7_SUPPORTS_VFP.
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Change-Id: I3bab7c2ed04766d0628c14094557b2751f60a428
This makes the PSCI SYSTEM_OFF call work on QEMU. It assumes that QEMU has
semihosting enabled, but that is already assumed by the image loader.
Signed-off-by: Andrew Walbran <qwandor@google.com>
Change-Id: I0fb7cf7909262b675c3143efeac07f4d60730b03
This lets the Linux kernel or any other image which expects an FDT in x0 be
loaded directly as BL33 without a separate bootloader on QEMU.
Signed-off-by: Andrew Walbran <qwandor@google.com>
Change-Id: Ia8eb4710a3d97cdd877af3b8aae36a2de7cfc654
This patch adds mapping for secure FLASH0 for qemu/virt and
qemu/qemu_sbsa platforms. This change is targeted for sbsa but since both
platforms share common code, changes in common defines was necessary.
For qemu_sbsa, this patch adds necessary mapping in order to boot without
semi-hosting from secure FLASH0. EFI need to stay in FLASH1 (share it with
variables) since it need to "run in place" in non secure domain. Changes
for this are under RFC at edk2-platforms mailing list:
https://patches.linaro.org/patch/171327/
(edk2-platforms/Platform/Qemu/SbsaQemu/SbsaQemu.dsc).
In docs qemu/virt is described as using semi-hosting, therefore this change
should be orthogonal to existing assumptions while giving possibility to
store both bl1 and fip in FLASH0 at some point (additional changes required
for that).
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I782bc3637c91c01eaee680b3c5c408e24b4b6e28
This patch introduces Qemu SBSA platform.
Both platform specific files where copied from qemu/qemu with changes for
DRAM base above 32bit and removal of ARMv7 conditional defines/code.
Documentation is aligned to rest of SBSA patches along the series and
planed changes in edk2-platform repo.
FixesARM-software/tf-issues#602
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I8ebc34eedb2268365e479ef05654b2df1b99128c
Patch introduce the macro NS_IMAGE_MAX_SIZE to simplify the image size
calculation. Use of additional parenthesis removes the possibility of
improper calculations due nested macro expansion for subtraction.
In case of platforms with DRAM window over 32bits, patch also removes
potential problems with type casting, as meminfo.image_size is uint32_t
but macro calculations were done in 64bit space.
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I2d05a2d9dd6000dba6114df53262995cf85af018
This commit change the plat/qemu directory structure into:
`-- plat
`-- qemu
|-- common (files shared with all qemu subplatforms)
|-- qemu (original qemu platform)
|-- qemu_sbsa (new sqemu_sbsa platform)
|-- subplat1
`-- subplat2
This opens the possibility of adding new qemu sub-platforms which reuse
existing common platform code. The first platform which will leverage new
structure will be SBSA platform.
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: Id0d8133e1fffc1b574b69aa2770ebc02bb837a9b
The QEMU platform port scans its device tree to advertise PSCI as the
CPU enable method. It does this by scanning *every* node in the DT and
check whether its compatible string starts with "arm,cortex-a". Then it
sets the enable-method to PSCI, if it doesn't already have one.
Other platforms might want to use this functionality as well, so let's
move it out of the QEMU platform directory and make it more robust by
fixing some shortcomings:
- A compatible string starting with a certain prefix is not a good way
to find the CPU nodes. For instance a "arm,cortex-a72-pmu" node will
match as well and is in turn favoured with an enable-method.
- If the DT already has an enable-method, we won't change this to PSCI.
Those two issues will for instance fail on the Raspberry Pi 4 DT.
To fix those problems, we adjust the scanning method:
The DT spec says that all CPU nodes are subnodes of the mandatory
/cpus node, which is a subnode of the root node. Also each CPU node has
to have a device_type = "cpu" property. So we find the /cpus node, then
scan for a subnode with the proper device_type, forcing the
enable-method to "psci".
We have to restart this search after a property has been patched, as the
node offsets might have changed meanwhile.
This allows this routine to be reused for the Raspberry Pi 4 later.
Change-Id: I00cae16cc923d9f8bb96a9b2a2933b9a79b06139
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
NOTE: AARCH32/AARCH64 macros are now deprecated in favor of __aarch64__.
All common C compilers pre-define the same macros to signal which
architecture the code is being compiled for: __arm__ for AArch32 (or
earlier versions) and __aarch64__ for AArch64. There's no need for TF-A
to define its own custom macros for this. In order to unify code with
the export headers (which use __aarch64__ to avoid another dependency),
let's deprecate the AARCH32 and AARCH64 macros and switch the code base
over to the pre-defined standard macro. (Since it is somewhat
unintuitive that __arm__ only means AArch32, let's standardize on only
using __aarch64__.)
Change-Id: Ic77de4b052297d77f38fc95f95f65a8ee70cf200
Signed-off-by: Julius Werner <jwerner@chromium.org>
This patch adds gicv3 support for qemu, in order not to break any legacy
use case, gicv2 is still set by default, gicv3 can be selected by
compiling parameter QEMU_USE_GIC_DRIVER=QEMU_GICV3.
Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Reviewed-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Tested-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: Ic63f38abf16ed3c36aa60e80d50103cf05cf797b
This file moves gicv2 codes to a new separate files, target is to add
gicv3 support later.
Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Reviewed-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Tested-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I30eb1fda5ea5c2b35d79360c52f46601cbca1bcc
The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.
The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.
Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The default implementations are defined in crash_console_helpers.S. The
platforms have to define plat_crash_console_*.
Implemented placeholders for platforms that were missing helpers.
Change-Id: Iea60b6f851956916e421dfd8c34a62d96eb9148e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Also, update platform_def.h guidelines about includes in the porting
guide.
Change-Id: I1ae338c9dd3242b309f6d53687ba2cb755d488c3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this header.
As all the symbols refer to virtual addresses, they have to be
uintptr_t, not unsigned long. This has also been fixed in bl_common.h.
Change-Id: I204081af78326ced03fb05f69846f229d324c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The definitions in bl1/bl1_private.h and bl2/bl2_private.h are useful for
platforms that may need to access them.
Change-Id: Ifd1880f855ddafcb3bfcaf1ed4a4e0f121eda174
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a2 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.
The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.
The exceptions are files that are imported from other projects:
- CryptoCell driver
- dt-bindings folders
- zlib headers
Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The macro EL_IMPLEMENTED() has been deprecated in favour of the new
function el_implemented().
Change-Id: Ic9b1b81480b5e019b50a050e8c1a199991bf0ca9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Madhukar Pappireddy
Masahisa Kojima
Maxim Uvarov
Sandrine Bailleux
Graeme Gregory
Tomas Pilar
Masato Fukumori
Tanmay Jagdale
Tomas Pilar
Jimmy Brisson
Manish V Badarkhe
Alexei Fedorov
Sumit Garg
Andre Przywara
Jerome Forissier
Andrew Walbran
Soby Mathew
Deepika Bhavnani
Radoslaw Biernacki
Julius Werner
Hongbo Zhang
Ambroise Vincent
Antonio Nino Diaz