This patch introduces new helper routines that allow
configuring the individual IRQs to be edge/level-triggered
via GICD_ICFGR registers. This is helpful to modify
the default configuration of the non-secure GIC SPI's, which
are all set during initialization to be level-sensitive.
Change-Id: I23deb4a0381691a686a3cda52405aa1dfd5e56f2
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
The CCI500 TRM explicitily requires completion of the write
operation before the read operation, and it is not guaranteed
by dmb but it is dsb.
Change-Id: Ieeaa0d1a4b8fcb87108dea9b6de03d9c8a150829
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
When a platform enables its caches before it initializes the
GICC/GICR interface then explicit cache maintenance is not
needed. Remove these here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
The functions cci_enable_snoop_dvm_reqs and cci_disable_snoop_dvm_reqs write
in the SNOOP_CTRL_REGISTER of the slave interface and it polls the status
register to be sure that the operation is finished before leaving the
functions. If the write in SNOOP_CTRL_REGISTER is reordered after the first
read in the status register then these functions can finish before
enabling/disabling snoops and DVM messages.
The CCI500 TRM specifies:
Wait for the completion of the write to the Snoop Control Register
before testing the change_pending bit.
Change-Id: Idc7685963f412be1c16bcd3c6e3cca826e2fdf38
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Use a _ prefix for Macro arguments to prevent that argument from
hiding variables of the same name in the outer scope
Rule 5.3: An identifier declared in an inner scope shall not
hide an identifier declared in an outer scope
Fixed For:
make LOG_LEVEL=50 PLAT=fvp
Change-Id: I67b6b05cbad4aeca65ce52981b4679b340604708
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Rule 5.1: External identifiers shall be distinct
Some of the identifier names in the GICv3 driver were so long that the
first 31 characters were identical. This patch shortens these names to
make sure they are different.
Fixed for:
LOG_LEVEL=50 PLAT=fvp
Change-Id: Iecd551e3a015d144716b87b42c83dd3ab8c34d90
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Commit 4c0d039076 ("Rework type usage in Trusted Firmware") changed
the type usage in struct declarations, but did not touch the definition
side. Fix the type mismatch.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Some low end platforms using DMC500 memory controller do not have
CCI(Cache Coherent Interconnect) interface and only have non-coherent
system interface support. Hence this patch makes the system interface
count configurable from the platforms.
Change-Id: I6d54c90eb72fd18026c6470c1f7fd26c59dc4b9a
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Accessing the interrupt_props array only happens inside a loop over
interrupt_props_num, so the GICv3 driver can cope with no secure
interrupts. This allows us to relax the asserts that insists on
a non-NULL interrupt_props pointer and at least one secure interrupt.
This enables GICv3 platforms which have no need for a secure interrupt.
This only covers the non-deprecated code paths.
Change-Id: I49db291906512f56af065772f69acb281dfbdcfb
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Accessing the interrupt_props array only happens inside a loop over
interrupt_props_num, so the GICv2 driver can cope with no secure
interrupts. As in fact we have already some asserts in place that
respect that, lets change the final place where we insist on a non-NULL
pointer to relax that.
This enables GICv2 platforms which have no need for a secure interrupt.
This only covers the non-deprecated code paths.
Also we remove a now redundant assert().
Change-Id: Id100ea978643d8558335ad28649d55743fe9bd4c
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
- Interrupt configuration is a 2-bit field, so the field shift has to
be double that of the bit number.
- Interrupt configuration (level- or edge-trigger) is specified in the
MSB of the field, not LSB.
Fixes applied to both GICv2 and GICv3 drivers.
FixesARM-software/tf-issues#570
Change-Id: Ia6ae6ed9ba9fb0e3eb0f921a833af48e365ba359
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Include missing plat_helpers.S into pl011_console.S, to build successfully
when MULTI_CONSOLE_API is enabled.
Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Emit runtime warnings when intializing the GIC drivers using the
deprecated method of defining integer interrupt arrays in the GIC driver
data structures; interrupt_prop_t arrays should be used instead. This
helps platforms detect that they have migration work to do. Previously,
no warning was emitted in this case. This affects both the GICv2 and GICv3
drivers.
Also use the __deprecated attribute to emit a build time warning if these
deprecated fields are used. These warnings are suppressed in the GIC
driver compatibility functions but will be visible if platforms use them.
Change-Id: I6b6b8f6c3b4920c448b6dcb82fc18442cfdf6c7a
Signed-off-by: Dan Handley <dan.handley@arm.com>
Rule 8.4: A compatible declaration shall be visible when
an object or function with external linkage is defined
Fixed for:
make DEBUG=1 PLAT=fvp LOG_LEVEL=50 all
Change-Id: I7c2ad3f5c015411c202605851240d5347e4cc8c7
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Rule 8.4: A compatible declaration shall be visible when
an object or function with external linkage is defined.
Change-Id: I26e042cb251a6f9590afa1340fdac73e42f23979
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Previously the definition of `_tzc_read_peripheral_id()` was wrapped
in ENABLE_ASSERTIONS build flag. This causes build issue for TZC400 driver
when DEBUG=1 and ENABLE_ASSERTIONS=0. This patch fixes the same by
moving the definitions outside the ENABLE_ASSERTIONS build flag.
Change-Id: Ic1cad69f02ce65ac34aefd39eaa96d5781043152
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This fixes all defects according to MISRA Rule 3.1: "The character
sequences /* and // shall not be used within a comment". This affects
all URLs in comments, so they have been removed:
- The link in `sdei_state.c` can also be found in the documentation file
`docs/sdei.rst`.
- The bug that the file `io_fip.c` talks about doesn't affect the
currently supported version of GCC, so it doesn't make sense to keep
the comment. Note that the version of GCC officially supported is the
one that comes with Linaro Release 17.10, which is GCC 6.2.
- The link in `tzc400.c` was broken, and it didn't correctly direct to
the Technical Reference Manual it should. The link has been replaced
by the title of the document, which is more convenient when looking
for the document.
Change-Id: I89f60c25f635fd4c008a5d3a14028f814c147bbe
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
If the GIC loses power during suspend, which the restore code was
written for, exit early in the post restore power sequence. This
prevents an assert from tripping, and the power sequence isn't needed
in this case anyways.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
This patch updates the ARM PL011 console driver to support the new
console API. The driver will continue to support the old API as well by
checking the MULTI_CONSOLE_API compile-time flag.
Change-Id: Ic34e4158addbb0c5fae500c9cff899c05a4f4206
Signed-off-by: Julius Werner <jwerner@chromium.org>
At present, the GIC drivers enable Group 0 interrupts only if there are
Secure SPIs listed in the interrupt properties/list. This means that,
even if there are Group 0 SGIs/PPIs configured, the group remained
disabled in the absence of a Group 0 SPI.
Modify both GICv2 and GICv3 SGI/PPI configuration to enable Group 0 when
corresponding SGIs/PPIs are present.
Change-Id: Id123e8aaee0c22b476eebe3800340906d83bbc6d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch brings in the following fixes:
- The per-PE target data initialized during power up needs to be
flushed so as to be visible to other PEs.
- Setup per-PE target data for the primary PE as well. At present,
this was only setup for secondary PEs when they were powered on.
Change-Id: Ibe3a57c14864e37b2326dd7ab321a5c7bf80e8af
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Some SoCs integrate a GIC in version 1 that is currently not supported
by the trusted firmware. This change hijacks GICv2 driver to handle the
GICv1 as GICv1 is compatible enough with GICv2 as far as the platform
does not attempt to play with virtualization support or some GICv2
specific power features.
Note that current trusted firmware does not use these GICv2 features
that are not available in GICv1 Security Extension.
Change-Id: Ic2cb3055f1319a83455571d6d918661da583f179
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
The GIC driver initialization currently allows an array of interrupts to
be configured as secure. Future use cases would require more interrupt
configuration other than just security, such as priority.
This patch introduces a new interrupt property array as part of both
GICv2 and GICv3 driver data. The platform can populate the array with
interrupt numbers and respective properties. The corresponding driver
initialization iterates through the array, and applies interrupt
configuration as required.
This capability, and the current way of supplying array (or arrays, in
case of GICv3) of secure interrupts, are however mutually exclusive.
Henceforth, the platform should supply either:
- A list of interrupts to be mapped as secure (the current way).
Platforms that do this will continue working as they were. With this
patch, this scheme is deprecated.
- A list of interrupt properties (properties include interrupt group).
Individual interrupt properties are specified via. descriptors of
type 'interrupt_prop_desc_t', which can be populated with the macro
INTR_PROP_DESC().
A run time assert checks that the platform doesn't specify both.
Henceforth the old scheme of providing list of secure interrupts is
deprecated. When built with ERROR_DEPRECATED=1, GIC drivers will require
that the interrupt properties are supplied instead of an array of secure
interrupts.
Add a section to firmware design about configuring secure interrupts.
FixesARM-software/tf-issues#262
Change-Id: I8eec29e72eb69dbb6bce77879febf32c95376942
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The helpers perform read-modify-write on GIC*_ICFGR registers, but don't
serialise callers. Any serialisation must be taken care of by the
callers.
Change-Id: I71995f82ff2c7f70d37af0ede30d6ee18682fd3f
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
SPIs can be routed to either a specific PE, or to any one of all
available PEs.
API documentation updated.
Change-Id: I28675f634568aaf4ea1aa8aa7ebf25b419a963ed
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The back end GIC driver converts and assigns the interrupt type to
suitable group.
For GICv2, a build option GICV2_G0_FOR_EL3 is introduced, which
determines to which type Group 0 interrupts maps to.
- When the build option is set 0 (the default), Group 0 interrupts are
meant for Secure EL1. This is presently the case.
- Otherwise, Group 0 interrupts are meant for EL3. This means the SPD
will have to synchronously hand over the interrupt to Secure EL1.
The query API allows the platform to query whether the platform supports
interrupts of a given type.
API documentation updated.
Change-Id: I60fdb4053ffe0bd006b3b20914914ebd311fc858
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Antonio Nino Diaz
Soby Mathew
Marcin Wojtas
Andrew F. Davis
Dimitris Papastamos
Roberto Vargas
Daniel Boulby
Masahiro Yamada
Amit Daniel Kachhap
Andre Przywara
Samuel Holland
Jonathan Wright
Jeenu Viswambharan
Michalis Pappas
Dan Handley
davidcunado-arm
Derek Basehore
Julius Werner
Etienne Carriere