Change the backup register used to store FWU parameters from 21 to 10.
This is chosen to have a Read/Write secure and Read non-secure register.
The mapping is also changed: only the first 4 bits will be used to store
the FWU index. The 4 next bits will be used to store count info. The
other bits are reserved.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Change-Id: I9249768287ec5688ba2d8711ce04d429763543d7
Add a dummy realm attestation key to RMMD, and return it on request.
The realm attestation key is requested with an SMC with the following
parameters:
* Fid (0xC400001B2).
* Attestation key buffer PA (the realm attestation key is copied
at this address by the monitor).
* Attestation key buffer length as input and size of realm
attesation key as output.
* Type of elliptic curve.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I12d8d98fd221f4638ef225c9383374ddf6e65eac
Add QDS support for ls1088a.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6c7a7a23fa6b9ba01c011a7e6237f8063d45e261
The LS1088A reference design board provides a comprehensive platform
that enables design and evaluation of the product (LS1088A processor).
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: If4ca24fcee7a4c2c514303853955f1b00298c0e5
LS1088A is a cost-effective, powerefficient, and highly integrated
SoC device featuring eight extremely power-efficient 64-bit ARM
Cortex-A53 cores with ECC-protected L1 and L2 cache memories for
high reliability, running up to 1.6 GHz.
This patch is to add ls1088a SoC support in TF-A.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Id9ebcdad1beab07ea81a41955edd4f471d6cf090
Refine the code to be compatible with new CCN504 which is used
by ls2088a.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I2e2b3bbb9392862b04bf8a89dfb9575bf4be974a
Support CHASSIS 3.0(such as SoC LS1088A).
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I60843bc4d604f0de1d91c6d3ad5eb4921cdcc91a
Add base address definiton for Chassis 3 platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6041b93c9e9bb49af60743bd277ac7cc6f1b9da8
Set the receiver gain to max value to recover
cold temp marginality issue for phy-gen2
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: If639fa3ed404cf6e1b8abcc2b7137db1fdd0b2c2
Fix build issue of mmap_add_ddr_region_dynamically():
ls_bl2_el3_setup.c:(.text.bl2_plat_preload_setup+0x28): undefined
reference to mmap_add_ddr_region_dynamically
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I74a8b4c2337fc0646d6acb16ce61755c5efbdf38
Add a dummy platform token to RMMD and return it on request. The
platform token is requested with an SMC with the following parameters:
* Fid (0xC40001B3).
* Platform token PA (the platform token is copied at this address by
the monitor). The challenge object needs to be passed by
the caller in this buffer.
* Platform token len.
* Challenge object len.
When calling the SMC, the platform token buffer received by EL3 contains
the challenge object. It is not used on the FVP and is only printed to
the log.
Signed-off-by: Mate Toth-Pal <mate.toth-pal@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Change-Id: I8b2f1d54426c04e76d7a3baa6b0fbc40b0116348
* changes:
feat(stm32mp1): select platform compilation either by flag or DT
feat(stm32mp1-fdts): add support for STM32MP13 DK board
feat(stm32mp1-fdts): add DDR support for STM32MP13
feat(stm32mp1-fdts): add st-io_policies node for STM32MP13
feat(stm32mp1): updates for STM32MP13 device tree compilation
feat(stm32mp1-fdts): add DT files for STM32MP13
feat(dt-bindings): add TZC400 bindings for STM32MP13
feat(stm32mp1): add "Boot mode" management for STM32MP13
feat(stm32mp1): manage HSLV on STM32MP13
feat(stm32mp1): add sdmmc compatible in platform define
feat(st-sdmmc2): allow compatible to be defined in platform code
feat(stm32mp1): update IO compensation on STM32MP13
feat(stm32mp1): call pmic_voltages_init() in platform init
feat(st-pmic): add pmic_voltages_init() function
feat(stm32mp1): update CFG0 OTP for STM32MP13
feat(stm32mp1): usb descriptor update for STM32MP13
feat(st-clock): add clock driver for STM32MP13
feat(dt-bindings): add bindings for STM32MP13
feat(stm32mp1): get CPU info from SYSCFG on STM32MP13
feat(stm32mp1): use only one filter for TZC400 on STM32MP13
feat(stm32mp1): add a second fixed regulator
feat(stm32mp1): adaptations for STM32MP13 image header
feat(stm32mp1): update boot API for header v2.0
feat(stm32mp1): update IP addresses for STM32MP13
feat(stm32mp1): add part numbers for STM32MP13
feat(stm32mp1): chip rev. Z is 0x1001 on STM32MP13
feat(stm32mp1): update BACKUP_BOOT_MODE for STM32MP13
feat(stm32mp1): stm32mp_is_single_core() for STM32MP13
feat(stm32mp1): remove unsupported features on STM32MP13
feat(stm32mp1): update memory mapping for STM32MP13
feat(stm32mp1): introduce new flag for STM32MP13
feat(st): update stm32image tool for header v2
To choose either STM32MP13 or STM32MP15, one of the two flags can be
set to 1 in the make command line. Or the platform selection can be
done with device tree name, if it begins with stm32mp13 or stm32mp15.
Change-Id: I72f42665c105b71a84b4952ef3fcd6c06ae4598c
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add dedicated device tree files for STM32MP13.
Add new DDR compatible for STM32MP13x.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: Ib1bb9ad8cb2ab9f5f81549635d6604093aeb99d3
Add new APIs to enter and exit "boot mode".
In this mode a potential tamper won't block access or reset
the secure IPs needed while boot, without this mode a dead
lock may occurs.
Change-Id: Iad60d4a0420ec125b842a285f73a20eb54cd1828
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
On STM32MP13, the high speed mode for pads in low voltage is different
from STM32MP15. Each peripheral supporting the feature has its own
register.
Special care is taken for SDMMC peripherals. The HSLV mode is enabled
only if the max voltage for the pads is lower or equal to 1.8V.
Change-Id: Id94d2cca17dd4aca4d764230a643b2bb9a5f3342
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add DT_SDMMC2_COMPAT define in stm32mp1_def.h file in platform.
It allows the use of the compatible in platform code.
Change-Id: I535ad67dd133bab59cf81881adaef42d8e88632c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP13, two new SD1 and SD2 IO compensations cells are added,
for SDMMC1 and SDMMC2. They have to be managed the same way as the
main compensation cell.
Change-Id: Ib7aa648d65fc98e1613bfb46b0e7dd568fd21002
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The nominal voltage for VDDCPU when Cortex-A7 runs at 650MHz is 1.25V
on STM32MP13. VDDCORE should be set at 1.25V as well.
This is necessary, as the PMIC values in its NVMEM are 1.2V.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I3c24fe4cd68c7bf143cf9318ab38a15d6d41b5d2
This field is now declared on the 10 LSB bits on STM32MP13.
Several possible values are specified in the Reference Manual, and
indicate an open or closed device. Other values lead to a system panic.
Change-Id: I697124a21db66a56e7e223d601aa7cf44bb183c4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Update USB and DFU descriptor used for STM32MP13x
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I6e8111d279f49400a72baa12ff39f140d97e1c70
Add new clock driver for STM32MP13. Split the include file to manage
either STM32MP13 or STM32MP15.
Change-Id: Ia568cd12b1d5538809204f0fd2224d51e5d1e985
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
The IDC register from DBGMCU is duplicated in SYSCFG. As SYSCFG is
always accessible, get chip ID and revision ID from there on STM32MP13.
Change-Id: Ib0b6e8f68a2934a45ec0012f69db6c12a60adb17
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The ERXCTLR_EL1 register reads are RES0 for some error records
leading to a false assert on a read back.
This patch removes the assert on reading back the ERXCTLR_EL1
register to fix this issue.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I0cab30b12656a800ba87b8bb94b4c67a2331dee6
On STM32MP13, there is only 1 DDR port, hence only 1 TZC400 filter.
Change-Id: I4f6750022cdaf658cd209a4bf48a6cdb0717020e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Increase the fixed regulator number that needs to be
2 for STM32MP13.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: Ica990fe9a6494b76aed763d2d353f5234fed7cea
The header must now include by default at least an extra padding
header, increasing the size of the header to 512 bytes (0x200).
This header will be placed at the end of SRAM3 by BootROM, letting
the whole SYSRAM to TF-A.
The boot context is now placed in SRAM2, hence this memory has to be
mapped in BL2 MMU. This mapping is done for all SRAMs in a 2MB area.
Change-Id: I50fcd43ecd0ba2076292b057566efe6809b9971a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the new field for the new header v2.0.
Force MP13 platform to use v2.0.
Removing unused fields in boot_api_context_t for STM32MP13.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iac81aad9a939c1f305184e335e0a907ac69071df
Add the IP addresses that are STM32MP13 and update the ones for
which the base address has changed.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iea71a491da36f721bfd3fbfb010177e2a6a57281
Add the new part numbers and adapt the functions that use them.
There is no package number in OTP as they all share the same GPIO
banks.
This part is then stubbed for STM32MP13.
Change-Id: I13414326b140119aece662bf8d82b387dece0dcc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP13, the chip revision Z is 0x1001, contrary to STM32MP15,
for which it was 0x2001.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: If65482e824b169282abb5e26ca91e16ef7640b52
The backup register used on STM32MP15 to save the boot interface for
the next boot stage was 20. It is now saved in backup register 30
on STM32MP13.
Change-Id: Ibd051ff2eca7202184fa428ed57ecd4ae7388bd8
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP13 is a single Cortex-A7 CPU, always return true in
stm32mp_is_single_core() function.
Change-Id: Icf36eaa887bdf314137eda07c5751cea8c950143
Signed-off-by: Yann Gautier <yann.gautier@st.com>
* GPIO: On STM32MP13, there are no banks GPIOJ, GPIOK and GPIOZ.
* STM32MP13 is a single Cortex-A7 CPU: remove reset from MPU1
and reset from MCU traces
* There is no MCU on STM32MP13. Put MCU security management
under STM32MP15 flag.
* The authentication feature is not supported yet on STM32MP13,
put the code under SPM32MP15 flag.
* On STM32MP13, the monotonic counter is managed in ROM code, keep
the monotonic counter update just for STM32MP15.
* SYSCFG: put registers not present on STM32MP13 under STM32MP15
flag, as the code that manages them.
* PMIC: use ldo3 during DDR configuration only for STM32MP15
* Reset UART pins on USB boot is no more required.
Change-Id: Iceba59484a9bb02828fe7e99f3ecafe69c837bc7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
SYSRAM is only 128KB and starts at 0x2FFE0000.
SRAMs are added.
BL2 code and DTB sizes are also reduced to fit in 128KB.
Change-Id: I25da99ef5c08f8008ff00d38248d61b6045adad4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP13 is a variant of STM32MP1, with a single Cortex-A7, and no
Cortex-M4.
There is only one DDR port.
SP_min is not supported, only OP-TEE can be used as monitor.
STM32MP13 uses the header v2.0 format for stm32image generation
for BL2.
Change-Id: Ie5b0e3230c5e064fe96f3561fc5b3208914dea53
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The stm32image tool is updated to manage new header v2.0 for BL2
images.
Add new structure for the header v2.0 management.
Adapt to keep compatibility with v1.0.
Add the header version major and minor in the command line
when executing the tool, as well as binary type (0x10 for BL2).
Change-Id: I70c187e8e7e95b57ab7cfad63df314307a78f1d6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
This patch applies CVE-2022-23960 workarounds for Cortex-A75,
Cortex-A73, Cortex-A72 & Cortex-A57. This patch also implements
the new SMCCC_ARCH_WORKAROUND_3 and enables necessary discovery
hooks for Coxtex-A72, Cortex-A57, Cortex-A73 and Cortex-A75 to
enable discovery of this SMC via SMC_FEATURES. SMCCC_ARCH_WORKAROUND_3
is implemented for A57/A72 because some revisions are affected by both
CVE-2022-23960 and CVE-2017-5715 and this allows callers to replace
SMCCC_ARCH_WORKAROUND_1 calls with SMCCC_ARCH_WORKAROUND_3. For details
of SMCCC_ARCH_WORKAROUND_3, please refer SMCCCv1.4 specification.
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ifa6d9c7baa6764924638efe3c70468f98d60ed7c