Add the standard CLAMP macro. It ensures that
x is between the limits set by low and high.
If low is greater than high the result is undefined.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Ia173bb9ca51bc8d9a8ec573bbc15636a94f881f4
Imported from the LLVM compiler_rt library on master branch as of
30 Oct 2018 (SVN revision: r345645).
This is to get the __popcountsi2(si_int a) and __popcountdi2(di_int a)
builtin which are required by a driver that uses a __builtin_popcount().
Change-Id: I8e0d97cebdd90d224690c8ce1b02e657acdddb25
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
SPI-NOR framework is based on SPI-MEM framework using
spi_mem_op execution interface.
It implements read functions and allows NOR configuration
up to quad mode.
Default management is 1 data line but it can be overridden
by platform.
It also includes specific quad mode configuration for
Spansion, Micron and Macronix memories.
Change-Id: If49502b899b4a75f6ebc3190f6bde1013651197f
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
This framework supports SPI-NAND and is based on the
SPI-MEM framework for SPI operations. It uses a common high
level access using the io_mtd.
It is limited to the read functionalities.
Default behavior is the basic one data line operation
but it could be overridden by platform.
Change-Id: Icb4e0887c4003a826f47c876479dd004a323a32b
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
The raw NAND framework supports SLC NAND devices.
It introduces a new high level interface (io_mtd) that
defines operations a driver can register to the NAND framework.
This interface will fill in the io_mtd device specification:
- device_size
- erase_size
that could be used by the io_storage interface.
NAND core source file integrates the standard read loop that
performs NAND device read operations using a skip bad block strategy.
A platform buffer must be defined in case of unaligned
data. This buffer must fit to the maximum device page size
defined by PLATFORM_MTD_MAX_PAGE_SIZE.
The raw_nand.c source file embeds the specific NAND operations
to read data.
The read command is a raw page read without any ECC correction.
This can be overridden by a low level driver.
No generic support for write or erase command or software
ECC correction.
NAND ONFI detection is available and can be enabled using
NAND_ONFI_DETECT=1.
For non-ONFI NAND management, platform can define required
information.
Change-Id: Id80e9864456cf47f02b74938cf25d99261da8e82
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
* changes:
zynqmp: pm: clock: Move custom flags to typeflags
zynqmp: pm: clock: Add support for custom type flags
plat: xilinx: zynqmp: Add GET_CALLBACK_DATA function
zynqmp: pm: Remove CLK_TOPSW_LSBUS from invalid clock list
UEFI decompression will fail if the payload size is too large and the load
address is too low. This patch moves the payload to a higher address to fix
the issue
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: I36087fbd2237b62891c59dbe2d34336bddfaa396
All function in socfpga_sip_svc.c should only be called locally except
sip_smc_handler().
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib84ef9a2e521967baa4cfd32e6bc569dd3a5d2f5
Now that there is plenty of space (32 KiB) available for NOBITS
sections, we can afford using an entire page for coherent memory. In
fact, because it simplifies the code, this is a beneficial change for
loaded image (.text) size, where we are still close to the size limit.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I0b899dabcb162015c63b0e4aed0869569c889ed9
Implements a way to add platform specific power off code to a
Marvell Armada 8K platform.
Marvell Armada 8K boards can now add a board/system_power.c file
that contains a system_power_off() function.
This function can now send a command to a power management MCU or
other board periferals before shutting the board down.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: Iaba20bc2f603195679c54ad12c0c18962dd8e3db
---
I am working on a device that will be ported later, which has a
custom power management MCU that handles LEDs, board power and fans
and requires this separation.
Add missing #address-cells and #size-cells into generated DT, otherwise
the DT is invalid. While the parsers thus far handled this correctly via
various fallbacks, this is not applicable in the long run, so fix this.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ic808a3b27b93e5258ec1a19acc3d593e53625c15
Existing implementation does not allow to change the value of the
DIV1 because DIV2 does not have SET_RATE_PARENT flag.
This causes DIV1 value to be fixed and only value of DIV2 will be
adjusted according to required clock rate.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ic6c4ca091bf0c5dc91ebddf86621c82c705dc87b
Linux expects custom flags in type flags. So move
custom flags to type flags instead of providing
them to clock core flags.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I668a8084d966815a9d9e86c2b18ecb5b18cb6b78
Add support to add extra custom type flags and provide
to caller in topology query.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Id9cc065dbadfed2291dd4f62674d7838da4cdf40
Add GET_CALLBACK_DATA function again as now Linux driver
supports both mailbox as well as ISR method.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ieb99d61976e1cb718fcd1021d9cf4958e7556c81
It's in fact mandatory. Seen with RPi firmware 1.20190925.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: I80739b74f25817294adc52cfd26a3ec59c06f892
* changes:
zynqmp: pm: Add LPD WDT clock to the pm_clock structure
zynqmp: pm: Fix clock models and IDs of GEM-related clocks
zynqmp: pm: Rename FPD WDT clock ID
plat: xilinx: zynqmp: Correct syscnt freq for QEMU
arm64: zynqmp: Add idcodes for new RFSoC silicons ZU48DR and ZU49DR
arm64: zynqmp: Add id for new RFSoC device ZU39DR
This patch removes un-needed r/w parameter checks for qspi driver. The
driver can actually access any offset and size.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: If60b2c016aa91e2c24ddc57c6ad410c8dc5dcf53
This patch fixes the violations of Rule 21.1 from all the
header files.
Rule 21.1 "#define and #undef shall not be used on a reserved
identifier or reserved macro name"
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I12e17a5d7158defd33b03416daab3049749905fc
This patch fixes the violations of Rule 21.1 from all the
Tegra common header files.
Rule 21.1 "#define and #undef shall not be used on a reserved
identifier or reserved macro name"
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I2e117645c110e04c13fa86ebbbb38df4951d2185
This toolchain provides multiple cross compilers and are publicly
available on developer.arm.com
We build TF-A in CI using:
AArch32 bare-metal target (arm-none-eabi)
AArch64 ELF bare-metal target (aarch64-none-elf)
Change-Id: I910200174d5bad985504d1af4a1ae5819b524003
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
IO seek offset can be set to values above UINT32_MAX, this change
changes the seek offset argument from 'ssize_t' to 'signed long long'.
Fixing platform seek functions to match the new interface update.
Change-Id: I25de83b3b7abe5f52a7b0fee36f71e60cac9cfcb
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
NOTE for platform integrators:
API `plat_psci_stat_get_residency()` third argument
`last_cpu_idx` is changed from "signed int" to the
"unsigned int" type.
Issue / Trouble points
1. cpu_idx is used as mix of `unsigned int` and `signed int` in code
with typecasting at some places leading to coverity issues.
2. Underlying platform API's return cpu_idx as `unsigned int`
and comparison is performed with platform specific defines
`PLAFORM_xxx` which is not consistent
Misra Rule 10.4:
The value of a complex expression of integer type may only be cast to
a type that is narrower and of the same signedness as the underlying
type of the expression.
Based on above points, cpu_idx is kept as `unsigned int` to match
the API's and low-level functions and platform defines are updated
where ever required
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ib26fd16e420c35527204b126b9b91e8babcc3a5c
This patch removes re-definition of the following FVP build
options from plat\arm\board\fvp\fvp_def.h:
'FVP_CLUSTER_COUNT'
'FVP_MAX_CPUS_PER_CLUSTER'
'FVP_MAX_PE_PER_CPU'
which are set in platform.mk.
This fixes a potential problem when a build option set in
platform.mk file can be re-defined in fvp_def.h header file
used by other build component with a different makefile which
does not set this option.
Ref. GENFW-3505.
Change-Id: I4288629920516acf2c239c7b733f92a0c5a812ff
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Lionel Debieve
Soby Mathew
Mark Dykes
Manish Pandey
Tien Hock, Loh
Hadi Asyrafi
Alexei Fedorov
Samuel Holland
Luka Kovacic
Marek Vasut
Ravi Patel
Rajan Vaja
Olivier Deprez
Jan Kiszka
Sandrine Bailleux
Varun Wadekar
Madhukar Pappireddy
Yann Gautier
Deepika Bhavnani