Currently only UART0 is handled as console device, fix the
code to support UART1 as console also.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I08f69b65b78b967ceb7159f4a467aa5982b1f791
Warnings about header files include order were triggered by CI.
Correct the include order to mathc CI requirements.
Change-Id: Iaca959add924e0e1fa2e56fab2348f0ee36e5fa7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
SoC UART1 is internally connected to MCP UART1 so this
cannot be used as AP runtime UART instead we use the
IOFPGA UART0 as the AP runtime UART.
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: Iecefb0d2cb875b3ecf97e0983b06f6e914835021
This patch adds support to load nt_fw_config
with the information from plat_info sds
structure which is then passed from BL2 to BL33.
Signed-off-by: sah01 <sahil@arm.com>
Change-Id: I2242da7404c72a4f9c2e3d7f3b5c154890a78526
Different platform_info sds struct definition will be used
for fvp and soc.
Signed-off-by: sahil <sahil@arm.com>
Change-Id: I92f0e1b2d0d755ad0405ceebfeb78d6e4c67013d
This patch adds all SOC and FVP related changes required to boot
a standard TBBR style boot on Morello.
Signed-off-by: sahil <sahil@arm.com>
Change-Id: Ib8f7f326790b13082cbe8db21a980e048e3db88c
Based on the SCC configuration value obtained from the SDS
platform information structure configure DMC-Bing Server or
Client mode after zeroing out the memory.
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: I0555fa06c9c1906264848f4e32ca413b4742cdee
For Morello SoC, we use ECC capability for the RDIMMs
which require the entire DDR memory space to be zeroed
out before it can be accessed.
Change-Id: Icbe9916f9a2d3c4ce839d8bf7f867efa18f33e23
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
The same folder "plat/arm/board/morello" is going to be
used by both Morello FVP and Morello SoC platforms.
TARGET_PLATFORM build flag has been introduced to
differentiate between the two platforms
Change-Id: I3e94da372a3f1ba810b4259b85dd4c204306c359
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
There might be several platforms which use the
TARGET_PLATFORM build option to differentiate the code
between the platform variants.
Use of TARGET_PLATFORM in the common code leads to build
failures instead use PLAT build option.
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: I9724caf875bd56225e035ecffa8b9ca1a50d3401
Protect the UART instance used for serial boot
with UART used for console.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ieee1557b34e7baa81594c3fbf0513191737027bf
Use stm32mp_uart_console_setup() in SP_min setup.
Adapt the function stm32mp_uart_console_setup() for BL32 (no reset, add
CONSOLE_FLAG_RUNTIME under DEBUG.
Change-Id: Ib2d35c8d285dafb680aa218872ad679cbf43d0ed
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use newly created function stm32mp_uart_console_setup().
And remove now useless code.
Change-Id: Ib8d0319d3f4f54309848bc225b58608cea73bad9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To ease console configuration, a dedicated function is created:
stm32mp_uart_console_setup(). The code will also be common for the
different BLs.
Change-Id: Idf3cad756f125ca2313cf30b1311637a9df8f27f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add function stm32_get_boot_interface to get the current boot interface
from information saved in the TAMP register.
Change-Id: I23af43c68eeaebe4c45920a57d739117aea3fbb1
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The function stm32_save_boot_interface()is moved to stm32mp1_private.c
file. The files stm32mp1_context.{c,h} are removed.
As return is always 0, change the function to return void.
Call it earlier, to be able to use it when configuring console.
Change-Id: I8986e1257dc8e8708eab044a51ea1f2426b16597
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Those pins are configured by ROM code, for serial boot use cases.
Their configs are reset if the boot is done on UART, but not on USB.
This should then be done in TF-A. This has to be done after clock
init, and before console is configured.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I29a9694e25fcf1665360dd71f73937f769c43b52
Add set_gpio_reset_cfg() to set a pin in its reset configuration:
analog, no-pull, speed low, and its secure configuration, thanks to
stm32_gpio_is_secure_at_reset().
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7b73c3636859f97fcc57f81cf68b42efc727922e
Sort the compilation flags in platform.mk when checking and defining
them for C files.
Change-Id: I5a08399c89ede4c0bd8697045706122732205db5
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Thanks to dyn_cfg_dtb_info_get_index(), we can check if TOS_FW_CONFIG
is inside the FIP partition. If not we can skip its treatment when
populating FIP images.
Change-Id: If5623eabd1ba484549d4a908d4a6f43325b36875
Signed-off-by: Yann Gautier <yann.gautier@st.com>
With new gcc11.2 by default the -mbranch-protection is
set to "standard" which is leading to increase the text
section by 4Kb. As the ZynqMP uses the ARMv8 architecture,
so there is no impact when we disable the branch protection.
These instructions do not provide the branch protection in
architectures before Armv8.3-A.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I36f7a55abf99f50df2ee265255598d83b1f480c6
Implemented a platform function 'plat_mboot_measure_critical_data' to
measure critical data and record its measurement using the Event Log
driver.
'bl2_plat_mboot_finish' function invokes this platform function
immediately after populating the critical data.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ia198295c6e07ab26d436eab1ff90df2cf28303af
It doesn't look correct to use mbed TLS defines directly in the Event
Log driver as this driver may use another Crypto library in future.
Hence mbed TLS Crypto dependency on Event Log driver is removed by
introducing generic Crypto defines and uses those in the Event Log
driver to call Crypto functions.
Also, updated mbed TLS glue layer to map these generic Crypto defines
to mbed TLS library defines.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ibc9c751f60cbce4d3f3cf049b7c53b3d05cc6735
SynQuacer SoC contains a Cortex-M3 System Control Processor(SCP)
which manages system power.
This commit modifies the PSCI system_off handling to call SCMI,
same as other PSCI calls. System power-off is done by turing off
the ATX power supply through GPIO, this operation is transferred
to SCP.
Note that this commit modifies only the SCMI case, obsolete SCPI
implementation is not updated.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I6c1009e67cccd1eb5d14c338c3df9103d63709dd
The GTimer implemented on SynQuacer has similar issue found on Juno
wherein CNTBaseN.CNTFRQ can be written but does not reflect the value
of the CNTFRQ register in CNTCTLBase frame. This doesn't follow ARM ARM
in that the value updated in CNTCTLBase.CNTFRQ is not reflected
in CNTBaseN.CNTFRQ.
Hence enable the workaround (applied to Juno) for SynQuacer that updates
the CNTFRQ register in the Non Secure CNTBaseN frame.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I5204fb57f28c0945812814f008c4905ef0882e2b
Handle boot from UART with STM32CubeProgammer based on mmap io
for STM32MP15.
Depends-On: Iba84e8dfd67b9f30416efb0f6778e48ba1f75dad
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ibd719dd46a11da78633728675ef6639635b6cf67
Add a file to support the STMicroelectronics tool STM32CubeProgrammer
over UART in BL2 for STM32MP15x platform.
This tools is based on protocol defined in AN5275,
"USB DFU/USART protocols used in STM32MP1 Series bootloaders"
based on STM32 MCU protocols (AN3155, "USART protocol used
in the STM32 bootloader").
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I956c95d8de0a94d1eb8e61f043651dae7b838170
These registers make it is possible to do external resets of A3700
peripherals. Most peripherals are reset by clearing a particular bit,
but some need setting the bit. Reflect this via "_N" suffix in macro
names.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iacef5e671746b831b5beea9e4fdcc59d8de84edc
Commit 4333f95 ("fix(spm_mm): do not compile if SVE/SME is enabled")
introduced a comiple time check to verify if ENABLE_SVE_FOR_NS is set to
0 when SPM_MM build is enabled. To support SPM_MM builds on SGI/RD
platforms set ENABLE_SVE_FOR_NS to 0.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: If78ed7567f6d988795b2bc7f772a883783246964
MISRA Violation: MISRA-C:2012 R.10.6
- The value of a composite expression shall not be assigned to an object
with wider essential type
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: Ia0d13c3cfeb13d22b6fc7e8869cc713218302973
MISRA Violation: MISRA-C:2012 R.14.4
- The controlling expression of an if statement and the controlling
expression of an iteration-statement shall have essentially Boolean type.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I8cf821a42015858200cc0c514600012c8f61061f
MISRA Violation: MISRA-C:2012 R.17.7
- The value returned by a function having non-void return type shall be
used ((void) missing for discarded return value.).
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I1e6a598b9fe6c571a3e5010ee832ef860dfe491d
MISRA Violation: MISRA-C:2012 R.10.3
- The value of an expression shall not be assigned to an object with a
narrower essential type or of a different essential type category
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I9c6dd8dba40db8067b46947ceff295732648612a
Venkatesh Yadav Abbarapu
Madhukar Pappireddy
Yann Gautier
Chandni Cherukuri
sah01
Manoj Kumar
Yann Gautier
Manish Pandey
Manish V Badarkhe
Sandrine Bailleux
Masahisa Kojima
Tinghan Shen
Patrick Delaunay
Patrick Delaunay
Pali Rohár
Vijayenthiran Subramaniam
Rex-BC Chen
Abhyuday Godhasara