We don't ever expect to load a binary with an STM32 header on the Arm
FVP platform so remove this type of image from the list of
measurements.
Also remove the GPT image type from the list, as it does not get
measured. GPT is a container, just like FIP is. We don't measure the FIP
but rather the images inside it. It would seem logical to treat GPT the
same way.
Besides, only images that get loaded through load_auth_image() get
measured right now. GPT processing happens before that and is handled in
a different way (see partition_init()).
Change-Id: Iac4de75380ed625b228e69ee4564cf9e67e19336
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
For Arm platforms PIE is enabled when RESET_TO_BL31=1 in aarch64 mode on
the similar lines enable PIE when RESET_TO_SP_MIN=1 in aarch32 mode.
The underlying changes for enabling PIE in aarch32 is submitted in
commit 4324a14bf
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib8bb860198b3f97cdc91005503a3184d63e15469
* changes:
feat(tc0): add cpu capacity to provide scheduling information
fix(tc0): remove "arm,psci" from psci node
feat(tc0): update mhuv2 dts node to align with upstream driver
"arm,psci" expects the FIDs for cpu-on, cpu-off and cpu-suspend, which
arent present in the device tree, so remove it from psci compatible.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: Icd1ce8ec7fd3f270925e4b3d5d0187088ffe4ba5
The MHUv2 driver has been merged upstream, and it has a different
dts format compared to what was previously used. This patch aligns
with the upstream driver.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: Ic963c21c1475d301c3a75686718e6e17841831c3
Enables SVE support for the secure world via ENABLE_SVE_FOR_SWD.
ENABLE_SVE_FOR_SWD defaults to 0 and has to be explicitly set by the
platform. SVE is configured during initial setup and then uses EL3
context save/restore routine to switch between SVE configurations for
different contexts.
Reset value of CPTR_EL3 changed to be most restrictive by default.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I889fbbc2e435435d66779b73a2d90d1188bf4116
As FF-A driver probes OP-TEE SP dynamically, these entries are no more
required.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Ica091722a7fad13e02662b9b2cd11ca1879b9f80
Third instance of cactus is a UP SP. Set its vcpu count to 1.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I34b7feb2915e6d335e690e89dea466e75944ed1b
This patch will make BL2_BASE to be hex valaue but
not a shell command.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Iebb86a0b9bc8cab1676bd8e898cf4a1b6d16f472
Some build variables have already defined in common
make helper file, use them directly.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I7fe6331160bfdf315924d4498d78b0a399eb2e89
Cortex A78 erratum 1821534 is a Cat B erratum present in r0p0 and
r1p0 of the A78 processor core, it is fixed in r1p1.
SDEN can be found here:
https://documentation-service.arm.com/static/603e3733492bde1625aa8780
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I71057c4b9625cd9edc1a06946b453cf16ae5ea2c
To quote jwerner in T925:
"The __sramdata in the declaration is a mistake, the correct target
section for that global needs to be .pmusram.data. This used to be
in .sram.data once upon a time but then the suspend.c stuff got added
and required it to be moved to PMUSRAM. I guess they forgot to update
that part in the declaration and since the old GCC seemed to silently
prefer the attribute in the definition, nobody noticed."
This fixes building with gcc 11.
fix #T925
Change-Id: I2b91542277c95cf487eaa1344927294d5d1b8f2b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Cortex A77 erratum 1791578 is a Cat B erratum present in r0p0, r1p0,
and r1p1 of the A77 processor core, it is still open.
SDEN can be found here:
https://documentation-service.arm.com/static/60a63a3c982fc7708ac1c8b1
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ib4b963144f880002de308def12744b982d3df868
BTI instructions are a part of the NOP space in earlier architecture
versions, so it's not inherently incorrect to enable BTI code
or instructions even if the target architecture does not support them.
This change reduces our reliance on architecture versions when checking
for features.
Change-Id: I79f884eec3d65978c61e72e4268021040fd6c96e
Signed-off-by: Chris Kay <chris.kay@arm.com>
Add parameters to fill header version:
Two new options are added (m and n) to fill header version major and minor.
The default is v1.0 (major = 1, minor = 0)
Fix image header on big endian hosts:
Three header fields are not properly converted to little endian
before assignment, resulting in incorrect header while executing
stm32image on big endian hosts.
Convert the value of the header fields version_number,
image_checksum and edcsa_algorithm to little endian before the
assignment.
Don't force the base of strtol, since it's able to select the base
automatically depending on the prefix of the value.
This does not breaks the current build script that extracts the
addresses, including the 0x prefix, from the map file.
This change helps using stm32image in shell scripts where the
addresses can be computed using the shell arithmetic expansion
"$((...))", that produces a value in base decimal.
The variable stm32image_header is declared with global visibility
but is use in one function only, move it as local variable in the function.
Fix error message on destination file:
The error message on mmap() failure of destination file reports
incorrectly information about the source file.
Change the error message to match the file that causes the error.
Change-Id: Iebc8c915297306845b3847b32f9516443a515c97
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
In stm32mp1_syscfg_disable_io_compensation(), to disable the IO
compensation cell, we have to set the corresponding bit in
SYSCFG_CMPENCLRR register, instead of clearing the bit in SETR register.
Change-Id: I510a50451f8afb9e98c24e1ea84efbf73a39e6b4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Invert test logic on the status register control to
fix issue when the bit SR_QUAD_EN_MX is not set.
Change-Id: I8b2f140219f124336bf96462abf9d9445d0308bc
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The dependency on this macro was added by patch [1]. But the macro
itself was forgotten in the patch.
[1] 128e0b3e2e ("stm32mp1: update rules for stm32image tool")
Change-Id: I49219e1e13828b97b95f404983da33ef4567fe23
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BSEC services should return SMC error codes as other IDs (defined in
stm32mp1_smc.h) and not BSEC driver ones. So that non-secure caller
is able to treat them correctly.
In global SMC handler, unknown ID should also return a value from this
definition list, and not the generic one, which seems not well adapted
for our needs.
Two unsigned values initializations are also changed from 0 to 0U.
Change-Id: Ib6fd3866a748cefad1d13d48f7be38241621023e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
In pmic_operate(), "regulators" node value must be checked before
entering in the fdt_for_each_subnode loop.
Change-Id: I1460cd24ec56ec47ab644f396b71b92973e75fb4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Make sure that i2c->i2c_state is correctly initialized
with I2C_STATE_RESET value this avoid hi2c->lock to not
be set to 0 when calling stm32_i2c_init during platform
suspend/resume operations.
Change-Id: I3b4c1f9115589325eb256789a1764c322741db7d
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The function stm32mp1_clk_init() returns an int. Return a negative
error value if the device tree is not found.
Change-Id: I422d5fea46c4d63d55a5b62e1db154c1f53f41b7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
We will maintain the kernel command line here instead of in U-Boot.
Signed-off-by: Anders Dellien <anders.dellien@arm.com>
Change-Id: I6011306cbaf47717c061f542e180005281695516
As there is constraint with the space for the release builds,
remove some of the legacy code.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5b8b16f34ed8e480f16ab1aeac80b85cdb391852
Add imx_system_reset2 which extends existing SYSTEM_RESET. It provides
architectural reset definitions and vendor-specific resets.
By default warm reset is triggered.
Also refactor existing implementation of wdog reset, add details about
each flag used.
Change-Id: Ia7348c32c385f1c61f8085776e81dd1e38ddda5c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
* changes:
feat(plat/nxp/lx2): add SUPPORTED_BOOT_MODE definition
feat(plat/nxp/common): add build macro for BOOT_MODE validation checking
refactor(plat/nxp/common): moved soc make-variables to new soc_common_def.mk
refactor(plat/nxp/lx216x): clean up platform configure file
refactor(plat/nxp/common): moved plat make-variables to new plat_common_def.mk
Fix the mapping of SCMI clock specifiers to the clusters they drive.
Also, add CPU cores to cluster mappings.
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Change-Id: I230bea5614de4e29b54e1686b31bf01c0b6aa86c
* changes:
refactor(plat/nvidia): use SOC_ID defines
refactor(plat/mediatek): use SOC_ID defines
refactor(plat/arm): use SOC_ID defines
feat(plat/st): implement platform functions for SMCCC_ARCH_SOC_ID
refactor(plat/st): export functions to get SoC information
feat(smccc): add bit definition for SMCCC_ARCH_SOC_ID
Use helper functions to get SPI and ESPI INTID limit, to remove
several pieces of similar code in gicv3 driver.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Iaf441fe5e333c4260e7f6d98df6fdd931591976d
Manish Pandey
Sandrine Bailleux
Madhukar Pappireddy
Mark Dykes
Usama Arif
Max Shvetsov
Arunachalam Ganapathy
Olivier Deprez
Jiafei Pan
bipin.ravi
johpow01
Patrick Georgi
Chris Kay
Nicolas Le Bayon
Yann Gautier
Lionel Debieve
Yann Gautier
Benjamin Gaignard
Anders Dellien
Venkatesh Yadav Abbarapu
Igor Opaniuk
Anurag Koul
Heyi Guo