Add helper function gicv3_get_espi_limit() to get the value of
(maximum extended SPI INTID + 1), so that some duplicated code can be
removed later.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I0355ca2647f872e8189add259f6c47d415494cce
Add macro of SUPPORTED_BOOT_MODE for board lx2160ardb, lx2160aqds,
lx2162aqds.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I4451ca030eca79c9bc5fee928eec497a7f0e878c
1. Added the build macro "add_boot_mode_define".
2. Use the macro to validate current BOOT_MODE against the
pre-determined list of SUPPORTED_BOOT_MODE, so each platform
need to define the list: SUPPORTED_BOOT_MODE.
3. Reports error if BOOT_MODE is not in SUPPORTED_BOOT_MODE list,
or BOOT_MODE is not supported yet althoug it is in SUPPORTED_BOOT_MODE.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I29be60ecdb19fbec1cd162e327cdfb30ba629b07
Move some soc make variables to new soc_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ia30bd332c95b6475f1cfee2f03a8ed3892a9568d
Use common code in common file to configure platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I72fe22751f12b8a4996a7b9f75fae4c912ea86de
Move some common make variables to new plat_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I37bd65b0f8124f63074fa03339f886c2cdb30bd3
The arm-gic.h was a concatenation of arm-gic.h and irq.h from Linux.
Just copy the 2 files here. They both have MIT license which is accepted
in TF-A.
With this alignment, a new macro is added (GIC_CPU_MASK_SIMPLE).
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ib45174f35f1796ebb7f34af861b59810cfb808b0
In case of TF-A running out of DDR there is a need to reserved
memory to let other SW know that none can't use this memory. HW
wise this region can be (and should be) also protected by
protection unit XMPU. This is the first step to add reserved
memory location to DT.
DT address corresponds with default address in U-Boot and also
default address in Xilinx BSPs.
Code is valid only when TF-A runs out of DDR. When it runs out
of OCM there is no need to reseve anything because OCM is hidden
to OS.
Change-Id: I01f230ced67207a159128cc11d11d36dd4590cab
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add sdei support for i.MX8MM, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I8308c629448bd8adca9d3d25701adcf0c5a6afc2
Add sdei support for i.MX8MN, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ie15fffdd09e1bba1b22334b8ccac2335c96b8b4d
Add newline(\n) to make the message clearer when the warnings are
really triggered.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I5e2574a52c9065db32ecb4d453b9b02445f69a82
Add helper function gicv3_get_spi_limit() to get the value of (maximum
SPI INTID + 1), so that some duplicated code can be removed later.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I160c8a88fbb71d22790b8999a84afbfba766f5e7
Due to the small OCRAM space used for TF-A, we will
meet imx8mq build failure caused by too small RAM size.
We CANNOT support it in TF-A CI. It does NOT mean that
imx8mq will be dropped by NXP. NXP will still actively
maintain it in NXP official release.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Iad726ffbc4eedc5f6770612bb9750986b9324ae9
When retrieving data from stm32 image file, the header is removed with
a memcpy that shifts the data to overwrite the useless header for next
binary.
STM32 binary from boot device:
|-------------------------------------|
| header | payload |
|-------------------------------------|
After the memcpy:
|-------------------------------------|
| payload | remain |
|-------------------------------------|
But the remaining data after the shifted payload is still in
the cache. As it is of no use for anyone, just invalidate the cache
at this address.
This is required if the DDR is mapped secure in BL2, and the secure
access is forbidden in BL33, or else TZC-400 issues an error.
Change-Id: Ice2af3b1ca49eccb79bfc62db60437e259d344ca
Signed-off-by: Yann Gautier <yann.gautier@st.com>
A variable hdr_sz is created in stm32image_partition_read() function.
It just represents the size of the stm32 image header but it really
improves the readability of the function.
Change-Id: I95ec62a78a4b6c6a75b0d8c8aa0faef8bee424da
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Fixes implementation against build warning reported by GCC:
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:6: error: ‘result’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
int result;
^~~~~~
Actually, by construction the current implementation of function
stm32image_partition_read() does not mandate result to be initialized
since it always reaches the exit point with a valid value in 'result'.
Yet, this change prevents compiler from complaining and is more robust
against future changes in the implementation.
Change-Id: I383575edb605b7535398952a5fdfc266c0068c71
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Device Tree address is now a parameter for dt_open_and_check() function.
This will allow better flexibility when introducing PIE and FIP.
The fdt pointer is now only assigned if the given address holds
a valid device tree file. This allows removing the fdt_checked variable,
as we now check fdt is not null.
Change-Id: I04cbb2fc05c9c711ae1c77d56368dbeb6dd4b01a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The boot device is now checked inside a dedicated rule, that is only
called during BL2 compilation step
Change-Id: Ie7bcd1f166285224b0c042238989a82f7b6105c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Added a new STM32MP_EMMC_BOOT option, which is used to look for SSBL in
the same eMMC boot partition TF-A booted from at a fixed 256k offset. In
case STM32 image header is not found, the boot process rolls back to a
GPT partition look-up scheme.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I85a87dc9ae7f2b915ed8e584be80f4b3588efc48
Use dedicated read function for boot partition
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: If75df7691fce0797205365736fc6e4e3429efdca
Added a public function to read blocks from a current boot partition.
switch between partitions has to respect eMMC partition switch timing.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I55b0c910314253e5647486609583fd290dadd30a
Add basic SDEI support, implementing the software event 0 only for now.
This already allows hypervisors like Jailhouse to use SDEI for internal
signaling while passing the GICC through to the guest (see also IMX8).
With SDEI on, we overrun the SRAM and need to stay in DRAM. So keep SDEI
off by default.
Co-developed-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: Ic0d71b4ef0978c0a34393f4e3530ed1e24a39ca2
The io_dummy code and function calls are only used in case BL32 is TF-A
SP_min, and not OP-TEE. This code in bl2_io_storage can then be put under
#ifndef AARCH32_SP_OPTEE.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I52787a775160b335f97547203f653419621f5147
STM32MP1 does not use BL1, the loading of BL2 is done by ROM code. It is
then useless to have an entry BL2_IMAGE_ID in the policies.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I464cedf588114d60522433123f8dbef32ae36818
The SPMC at S-EL2 manages S-EL1 execution contexts for SPs. The
currently running SP vCPU state is always saved when the SPMC exits to
SPMD. A fresh vCPU context is always restored when the SPMC is entered
from the SPMD and a SP resumed. For performance optimization reasons
this permits omitting the saving/restoring of the S-EL1 context from
within the EL3 SPMD on entering/exiting the SPMC. The S-EL2 SPMC and
NS-EL1 context save/restore remain done in the SPMD.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I66413ed5983913791ff5c9fc03c590ee65c6ccd7
Fix a remainder from early prototyping. OP-TEE as a secure partition
does not need specific SMC function id pass through to EL3.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I2843d1b9a5eb4c966f82790e1655fb569c2de7d4
The UUID strings used in FW_CONFIG DT are not aligned with UUIDs defined
in include/tools_share/firmware_image_package.h for BL32_EXTRA1 and
TRUSTED_KEY_CERT.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I517f8f9311585931f2cb931e0588414da449b694
The UART code for the A3K platform assumes that UART parent clock rate
is always 25 MHz. This is incorrect, because the xtal clock can also run
at 40 MHz (this is board specific).
The frequency of the xtal clock is determined by a value on a strapping
pin during SOC reset. The code to determine this frequency is already in
A3K's comphy driver.
Move the get_ref_clk() function from the comphy driver to a separate
file and use it for UART parent clock rate determination.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
We currently use Linaro release software stack version
20.01 in the CI. Reflect that change in the docs.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I0fa9f0163afb0bf399ec503abe9af4f17231f173
Heyi Guo
Mark Dykes
Jiafei Pan
Yann Gautier
Michal Simek
Peng Fan
Alexei Fedorov
Madhukar Pappireddy
Joanna Farley
dependabot[bot]
Jacky Bai
Manish Pandey
Yann Gautier
Nicolas Le Bayon
Olivier Deprez
Vyacheslav Yurkov
Jan Kiszka
Pali Rohár
Zelalem