ARMv8.3-PAuth adds functionality that supports address authentication of
the contents of a register before that register is used as the target of
an indirect branch, or as a load.
This feature is supported only in AArch64 state.
This feature is mandatory in ARMv8.3 implementations.
This feature adds several registers to EL1. A new option called
CTX_INCLUDE_PAUTH_REGS has been added to select if the TF needs to save
them during Non-secure <-> Secure world switches. This option must be
enabled if the hardware has the registers or the values will be leaked
during world switches.
To prevent leaks, this patch also disables pointer authentication in the
Secure world if CTX_INCLUDE_PAUTH_REGS is 0. Any attempt to use it will
be trapped in EL3.
Change-Id: I27beba9907b9a86c6df1d0c5bf6180c972830855
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Cortex A5 doesnt support VFP, Large Page addressing and generic timer
which are addressed in this patch. The device tree for Cortex a5
is also included.
Change-Id: I0722345721b145dfcc80bebd36a1afbdc44bb678
Signed-off-by: Usama Arif <usama.arif@arm.com>
Now that setjmp() and longjmp() are compliant with the standard they can
be moved with the other libc files.
Change-Id: Iea3b91c34eb353ace5e171e72f331602d57774d5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch introduces a build option 'OVERRIDE_LIBC' that platforms
can set to override libc from the BL image. The default value is '0'
to keep the library.
Change-Id: I10a0b247f6a782eeea4a0359e30a8d79b1e9e4e1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This reverts commit 2f37046524 ("Add support for the SMC Calling
Convention 2.0").
SMCCC v2.0 is no longer required for SPM, and won't be needed in the
future. Removing it makes the SMC handling code less complicated.
The SPM implementation based on SPCI and SPRT was using it, but it has
been adapted to SMCCC v1.0.
Change-Id: I36795b91857b2b9c00437cfbfed04b3c1627f578
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Following changes are done to make DT pre-processing similar to that of
U-boot/Linux kernel.
1. Creating seperate CPPFLAGS for DT preprocessing so that compiler
options specific to it can be accommodated.
e.g: "-undef" compiler option avoids replacing "linux" string(used in
device trees) with "1" as "linux" is a pre-defined macro in gnu99
standard.
2. Replace CPP with PP for DT pre-processing, as CPP in U-boot/Linux is
exported as "${CROSS_COMPILE}gcc -E" while in TF-A it is exported as
"${CROSS_COMPILE}cpp".
Change-Id: If4c61a249d51614d9f53ae30b602036d50c02349
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
The SPM implementation based on MM is going to be kept for the
foreseeable future.
Change-Id: I11e96778a4f52a1aa803e7e048d9a7cb24a53954
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
With this patch, each BL image can have its own compiler flags.
Change-Id: Ic9075a20bc6f6dc8a277587b9bee5e062306c090
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The current SPM is a prototype that only supports one secure partition
in EL0. The objective of SPM is to have multiple partitions. The current
MM interface isn't adequate for this, so it is needed to modify heavily
the code to add proper support for it.
However, there are platforms which are already using this (like SGI) and
removing the code would break it. For this reason, the current SPM code
has been duplicated in order to temporarily preserve compatibility. All
new improvements/changes to SPM will be done in the non-deprecated copy,
that may change without notice.
The new build option SPM_DEPRECATED has been introduced to select the SPM
implementation. It defaults to 1, that selects the deprecated SPM.
Change-Id: Ic9f80b53b450e97b4d3f47e4ef4a138ee8d87443
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This change allows patching of functions in the
romlib. This can be done by adding "patch" at the
end of the jump table entry for the function that
needs to be patched in the file jmptbl.i.
Functions patched in the jump table list will be
built as part of the BL image and the romlib
version will not be used
Change-Id: Iefb200cb86e2a4b61ad3ee6180d3ecc39bad537f
Signed-off-by: Sathees Balya <sathees.balya@arm.com>
Commit <ee1ba6d4ddf1> ("Makefile: Support totally quiet output with -s")
broke verbose (V=1) builds on Windows. This patch fixes it by adding
helpers to silence echo prints in a OS-dependent way.
Change-Id: I24669150457516e9fb34fa32fa103398efe8082d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
"-s" is a command line option to the make tool, to suppress normal output,
something to the effect of prepending every line with '@' in the Makefile.
However with our V={0|1} support, we now print the shortened command line
output in any case (even with V=1, in addition to the long line!).
Normally -s helps to not miss non-fatal warnings, which tend to scroll out
of the window easily.
Introduce a new Makefile variable ECHO, to control the shortened output.
We only set it in the (current default) V=0 case, and replace every
occurence of "@echo" with that variable.
When the user specifies "-s", we set ECHO to some magic string which
changes the output line into a comment, so the output is suppressed.
Beside suppressing every output for "-s", we also avoid the redundant
short output when compiling with V=1.
This changes the output to:
==========
$ make -s PLAT=.... bl31
Built build/.../release/bl31.bin
==========
$ make PLAT=.... bl31
...
CC lib/libc/strncmp.c
CC lib/libc/strnlen.c
...
==========
$ make V=1 PLAT=.... bl31
...
gcc -DDEBUG=0 .... -o build/.../release/libc/strncmp.o
gcc -DDEBUG=0 .... -o build/.../release/libc/strnlen.o
...
==========
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This patch introduces a build flag "RECLAIM_INIT_CODE" to mark boot time
code which allows platforms to place this memory in an appropriate
section to be reclaimed later. This features is primarily targeted for
BL31. Appropriate documentation updates are also done.
Change-Id: If0ca062851614805d769c332c771083d46599194
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
The code of LOAD_IMAGE_V2=0 has been removed.
Change-Id: Iea03e5bebb90c66889bdb23f85c07d0c9717fffe
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Fixes the dependencies issue for DTB image build.
Use -MT $(DTBS) -MMD -MF $(DTSDEP) to generate the precompilation
dependencies on DTS file(s).
"-MT $(DTBS)" builds a dependency for the target DTS file.
"-MMD" includes header file dependencies but not on system header files.
"-MF $(DTSDEP)" generates a Makefile script to define the dependencies
which is included afterward.
This change renames existing variable DEP into DTBDEP.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
At the moment the AArch32 instruction set isn't specified in the command
line, which means that the compiler is free to choose the one it sees
fit. This decision may change between compiler versions, so it is better
to specify it manually.
The build option AARCH32_INSTRUCTION_SET has been introduced for this
reason. This option can be set to T32 or A32 to pass the correct flags
to the compiler.
The current behaviour is to default to T32 due to it's smaller size.
Change-Id: I02297eb1d9404b5868ff7c054fbff9b3cda7fdb6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Memory Partitioning And Monitoring is an Armv8.4 feature that enables
various memory system components and resources to define partitions.
Software running at various ELs can then assign themselves to the
desired partition to control their performance aspects.
With this patch, when ENABLE_MPAM_FOR_LOWER_ELS is set to 1, EL3 allows
lower ELs to access their own MPAM registers without trapping to EL3.
This patch however doesn't make use of partitioning in EL3; platform
initialisation code should configure and use partitions in EL3 if
required.
Change-Id: I5a55b6771ccaa0c1cffc05543d2116b60cbbcdcd
Co-authored-by: James Morse <james.morse@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Romlib is a new image that is stored in ROM and contains the code of
several libraries that can be shared between different images. All
the functions within in the library are accessed using a jump table
which allows to update the romlib image whithout changing the binary
compatibility. This jump table can be also stored in RAM and it can
allow to patch a romlib with potential bugs fixes..
Change-Id: If980ccdaca24b7aaca900e32acc68baf6f94ab35
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
This patch adds all the make macros needed to create a library archive
and to use it in the link stage.
Change-Id: I26597bfd6543649d0b68a9b1e06aec1ba353e6de
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Add support for BLx stages to use libraries in MAKE_BL macro.
This change does not affect BL stages that do not have
BL_LIBS variable defined in their makefiles.
However in case that BL wants to use external library
(for instance vendor-specific DDR initialization code supplied
as a library), this patch will allow to build BL image linked
with such library.
Change-Id: Ife29069a72dc4aff833db6ef8b828736d6689b78
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
This is an add-on feature that allows processing
device tree with external includes.
"-Iinclude" is also added to INCLUDES.
It allows inclusion of dt-bindings files either in dts files or drivers,
as those files will be in include/dt-bindings/.
"-i fdts" is added to the DTC command line.
As the pre-processed files are in build directory, the DT source directory
has to be explicitely included, to manages /include/ directives.
fixesarm-software/tf-issues#595
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This patch allows platforms to dynamically disable authentication of
images during cold boot. This capability is controlled via the
DYN_DISABLE_AUTH build flag and is only meant for development
purposes.
Change-Id: Ia3df8f898824319bb76d5cc855b5ad6c3d227260
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
The ARMv8.4 RAS extensions introduce architectural support for software
to inject faults into the system in order to test fault-handling
software. This patch introduces the build option FAULT_HANDLING_SUPPORT
to allow for lower ELs to use registers in the Standard Error Record to
inject fault. The build option RAS_EXTENSIONS must also be enabled along
with fault injection.
This feature is intended for testing purposes only, and is advisable to
keep disabled for production images.
Change-Id: I6f7a4454b15aec098f9505a10eb188c2f928f7ea
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
RAS extensions are mandatory for ARMv8.2 CPUs, but are also optional
extensions to base ARMv8.0 architecture.
This patch adds build system support to enable RAS features in ARM
Trusted Firmware. A boolean build option RAS_EXTENSION is introduced for
this.
With RAS_EXTENSION, an Exception Synchronization Barrier (ESB) is
inserted at all EL3 vector entry and exit. ESBs will synchronize pending
external aborts before entering EL3, and therefore will contain and
attribute errors to lower EL execution. Any errors thus synchronized are
detected via. DISR_EL1 register.
When RAS_EXTENSION is set to 1, HANDLE_EL3_EA_FIRST must also be set to 1.
Change-Id: I38a19d84014d4d8af688bd81d61ba582c039383a
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
At present, any External Abort routed to EL3 is reported as an unhandled
exception and cause a panic. This patch enables ARM Trusted Firmware to
handle External Aborts routed to EL3.
With this patch, when an External Abort is received at EL3, its handling
is delegated to plat_ea_handler() function. Platforms can provide their
own implementation of this function. This patch adds a weak definition
of the said function that prints out a message and just panics.
In order to support handling External Aborts at EL3, the build option
HANDLE_EA_EL3_FIRST must be set to 1.
Before this patch, HANDLE_EA_EL3_FIRST wasn't passed down to
compilation; this patch fixes that too.
Change-Id: I4d07b7e65eb191ff72d63b909ae9512478cd01a1
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Due to differences in the bitfields of the SMC IDs, it is not possible
to support SMCCC 1.X and 2.0 at the same time.
The behaviour of `SMCCC_MAJOR_VERSION` has changed. Now, it is a build
option that specifies the major version of the SMCCC that the Trusted
Firmware supports. The only two allowed values are 1 and 2, and it
defaults to 1. The value of `SMCCC_MINOR_VERSION` is derived from it.
Note: Support for SMCCC v2.0 is an experimental feature to enable
prototyping of secure partition specifications. Support for this
convention is disabled by default and could be removed without notice.
Change-Id: I88abf9ccf08e9c66a13ce55c890edea54d9f16a7
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
In some use-cases BL2 will be stored in eXecute In Place (XIP) memory,
like BL1. In these use-cases, it is necessary to initialize the RW sections
in RAM, while leaving the RO sections in place. This patch enable this
use-case with a new build option, BL2_IN_XIP_MEM. For now, this option
is only supported when BL2_AT_EL3 is 1.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Since we use "?=" to set PLATFORM_ROOT, it is better to change the
name to be more special, or else it may be overridden by some
environment variables, such as in some CI build environments.
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
This makes incremental builds work when the only change is to a definition
in a makefile. This version of the patch has been fixed to avoid depending
on the dependency makefiles that are generated at build time.
Fixesarm-software/tf-issues#551
Signed-off-by: Stephen Warren <swarren@nvidia.com>
For platforms that have not migrated to MULTI_CONSOLE_API == 1, there
are a lot of confusing deprecated declaration warnings relating to
use of console_init() and console_uninit(). Some of these relate to use
by the generic code, not the platform code. These functions are not really
deprecated but *removed* when MULTI_CONSOLE_API == 1.
This patch consolidates these warnings into a single preprocessor warning.
The __deprecated attribute is removed from the console_init() and
console_uninit() declarations.
For preprocessor warnings like this to not cause fatal build errors,
this patch adds -Wno-error=cpp to the build flags when
ERROR_DEPRECATED == 0.
This option (and -Wno-error=deprecated-declarations) is now added to
CPPFLAGS instead of TF_CFLAGS to ensure the build flags are used in the
assembler as well as the compiler.
This patch also disentangles the MULTI_CONSOLE_API and ERROR_DEPRECATED
build flags by defaulting MULTI_CONSOLE_API to 0 instead of
ERROR_DEPRECATED. This allows platforms that have not migrated to
MULTI_CONSOLE_API to use ERROR_DEPRECATED == 1 to emit a more meaningful
build error.
Finally, this patch bans use of MULTI_CONSOLE_API == 1 and AARCH32, since
the AArch32 console implementation does not support
MULTI_CONSOLE_API == 1.
Change-Id: If762165ddcb90c28aa7a4951aba70cb15c2b709c
Signed-off-by: Dan Handley <dan.handley@arm.com>
Seems to have unintended side-effects on the build system such as
rebuilding certain parts of TF even though nothing has changed.
This reverts commit c6f651f9a3.
Change-Id: I1472e6c630cb6371ec629b7d97a5748d9a6fd096
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
This patch makes some minor changes to `MAKE_DTBS` make macro
and adds `dtbs` target to the `all` make target.
Change-Id: I1c5b4a603ada31d2dac2ed73da9ff707b410dd11
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This makes incremental builds work when the only change is to a
definition in a makefile.
Fixesarm-software/tf-issues#551
Signed-off-by: Stephen Warren <swarren@nvidia.com>
One typical usage of the pre-tool image filter is data compression,
and GZIP is one of the most commonly used compression methods.
I guess this is generic enough to be put in the common script instead
of platform.mk.
If you want to use this, you can add something like follows to your
platform.mk:
BL32_PRE_TOOL_FILTER := GZIP
BL33_PRE_TOOL_FILTER := GZIP
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There are cases where we want to process images before they are
passed to cert_create / fiptool.
My main motivation is data compression. By compressing images, we can
save data storage, and possibly speed up loading images. The image
verification will also get faster because certificates are generated
based on compressed images.
Other image transformation filters (for ex. encryption), and their
combinations would be possible. So, our build system should support
transformation filters in a generic manner.
The choice of applied filters is up to platforms (so specified in
platform.mk)
To define a new filter, <FILTER_NAME>_RULE and <FILTER_NAME>_SUFFIX
are needed.
For example, the GZIP compression filter can be implemented as follows:
------------------------>8------------------------
define GZIP_RULE
$(1): $(2)
@echo " GZIP $$@"
$(Q)gzip -n -f -9 $$< --stdout > $$@
endef
GZIP_SUFFIX := .gz
------------------------>8------------------------
The _RULE defines how to create the target $(1) from the source $(2).
The _SUFFIX defines the extension appended to the processed image path.
The suffix is not so important because the file name information is not
propagated to FIP, but adding a sensible suffix will be good to classify
the data file.
Platforms can specify which filter is applied to which BL image, like
this:
------------------------>8------------------------
BL32_PRE_TOOL_FILTER := GZIP
BL33_PRE_TOOL_FILTER := GZIP
------------------------>8------------------------
<IMAGE_NAME>_PRE_TOOL_FILTER specifies per-image filter. With this,
different images can be transformed differently. For the case above,
only BL32 and BL33 are GZIP-compressed. Nothing is done for other
images.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In the next commit, I need the image name in lowercase because
output files are generally named in lowercase.
Unfortunately, TOOL_ADD_IMG takes the first argument in uppercase
since we generally use uppercase Make variables.
make_helpers/build_macros.mk provides 'uppercase' macro to convert
a string into uppercase, but 'lowercase' does not exist. We can
implement it if we like, but it would be more straightforward to
change the argument of TOOL_ADD_IMG.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The PHONY target "bl*" generate $(BIN) and $(DUMP), but host tools
(fiptool, cert_create) only need $(BIN).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The third argument was given "true" by images, but it was moved
to TOOL_ADD_PAYLOAD. No more caller of CERT_ADD_CMD_OPT uses this.
So, the third argument is always empty. Remove it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now FIP_ADD_IMG takes care of both fiptool and cert_create
symmetrically. Rename it so that it matches the behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now FIP_ADD_PAYLOAD takes care of both fiptool and cert_create
symmetrically. Rename it so that it matches the behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The fiptool and cert_create use the same command options for images.
It is pretty easy to handle both in the same, symmetrical way.
Move CRT_ARGS and CRT_DEPS to FIP_ADD_PAYLOAD. This refactoring makes
sense because FIP_ADD_PAYLOAD is called from MAKE_BL (when building
images from source), and from FIP_ADD_IMG (when including external
images). (FIP_ADD_PAYLOAD will be renamed later on since it now
caters to both fiptool and cert_create).
We can delete CERT_ADD_CMD_OPT for images in tbbr.mk. It still
needs to call CERT_ADD_CMD_OPT directly for certificates.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The callers of these macros are supposed to use $(eval $(call, ...)).
The $(eval ...) on the callee side is unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The build system supports generating two FIP images, fip and fwu_fip.
Accordingly, we have similar build macros.
FIP_ADD_PAYLOAD <--> FWU_FIP_ADD_PAYLOAD
CERT_ADD_CMD_OPT <--> FWU_CERT_ADD_CMD_OPT
FIP_ADD_IMG <--> FWU_FIP_ADD_IMG
The duplicated code increases the maintenance burden. Also, the build
rule of BL2U looks clumsy - we want to call MAKE_BL to compile it from
source files, but we want to put it in fwu_fip. We can not do it in a
single macro call since the current MAKE_BL does not support fwu_fip.
To refactor those in a clean way is to support one more argument to
specify the FIP prefix. If it is empty, the images are targeted to
fip, whereas if the argument is "FWU_", targeted to fwu_fip.
The build macros prefixed with FWU_ go away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
check_* targets check if the required option are given, but do not
check the validity of the argument. If the specified file does not
exist, let the build fail immediately instead of passing the invalid
file path to tools.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch adds the foundation for a platform-independent coreboot
support library that can be shared by all platforms that boot BL31 from
coreboot (acting as BL2). It adds code to parse the "coreboot table", a
data structure that coreboot uses to communicate different kinds of
information to later-stage firmware and certain OS drivers.
As a first small use case for this information, allow platforms to
access the serial console configuration used by coreboot, removing the
need to hardcode base address and divisors and allowing Trusted Firmware
to benefit from coreboot's user configuration (e.g. which UART to pick
and which baud rate to use).
Change-Id: I2bfb39cd2609ce6640b844ab68df6c9ae3f28e9e
Signed-off-by: Julius Werner <jwerner@chromium.org>
It is better to not include BL2 in FIP when using `BL2 at EL3` as
platforms using this config would not have the capability to parse the
FIP format in Boot ROM and BL2 needs to be loaded independently. This
patch does the required changes for the same.
Change-Id: Iad285c247b3440e2d827fef97c3dd81f5c09cabc
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
This patch enables BL2 to execute at the highest exception level
without any dependancy on TF BL1. This enables platforms which already
have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL
stages without need for BL1. This is not currently possible because
BL2 executes at S-EL1 and cannot jump straight to EL3.
Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
check_* targets just check necessary command line argument, not
build any images. They should be specified as .PHONY.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 8f0617ef9e ("Apply TBBR naming convention to the fip_create
options") changed fiptool command options. We often forget to update
documentation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch overhauls the console API to allow for multiple console
instances of different drivers that are active at the same time. Instead
of binding to well-known function names (like console_core_init),
consoles now provide a register function (e.g. console_16550_register())
that will hook them into the list of active consoles. All console
operations will be dispatched to all consoles currently in the list.
The new API will be selected by the build-time option MULTI_CONSOLE_API,
which defaults to ${ERROR_DEPRECATED} for now. The old console API code
will be retained to stay backwards-compatible to older platforms, but
should no longer be used for any newly added platforms and can hopefully
be removed at some point in the future.
The new console API is intended to be used for both normal (bootup) and
crash use cases, freeing platforms of the need to set up the crash
console separately. Consoles can be individually configured to be active
active at boot (until first handoff to EL2), at runtime (after first
handoff to EL2), and/or after a crash. Console drivers should set a sane
default upon registration that can be overridden with the
console_set_scope() call. Code to hook up the crash reporting mechanism
to this framework will be added with a later patch.
This patch only affects AArch64, but the new API could easily be ported
to AArch32 as well if desired.
Change-Id: I35c5aa2cb3f719cfddd15565eb13c7cde4162549
Signed-off-by: Julius Werner <jwerner@chromium.org>
This patch adds a new build option, ENABLE_SVE_FOR_NS, which when set
to one EL3 will check to see if the Scalable Vector Extension (SVE) is
implemented when entering and exiting the Non-secure world.
If SVE is implemented, EL3 will do the following:
- Entry to Non-secure world: SIMD, FP and SVE functionality is enabled.
- Exit from Non-secure world: SIMD, FP and SVE functionality is
disabled. As SIMD and FP registers are part of the SVE Z-registers
then any use of SIMD / FP functionality would corrupt the SVE
registers.
The build option default is 1. The SVE functionality is only supported
on AArch64 and so the build option is set to zero when the target
archiecture is AArch32.
This build option is not compatible with the CTX_INCLUDE_FPREGS - an
assert will be raised on platforms where SVE is implemented and both
ENABLE_SVE_FOR_NS and CTX_INCLUDE_FPREGS are set to 1.
Also note this change prevents secure world use of FP&SIMD registers on
SVE-enabled platforms. Existing Secure-EL1 Payloads will not work on
such platforms unless ENABLE_SVE_FOR_NS is set to 0.
Additionally, on the first entry into the Non-secure world the SVE
functionality is enabled and the SVE Z-register length is set to the
maximum size allowed by the architecture. This includes the use case
where EL2 is implemented but not used.
Change-Id: Ie2d733ddaba0b9bef1d7c9765503155188fe7dae
Signed-off-by: David Cunado <david.cunado@arm.com>
This patch fixes a couple of issues for AArch32 builds on ARM reference
platforms :
1. The arm_def.h previously defined the same BL32_BASE value for AArch64 and
AArch32 build. Since BL31 is not present in AArch32 mode, this meant that
the BL31 memory is empty when built for AArch32. Hence this patch allocates
BL32 to the memory region occupied by BL31 for AArch32 builds.
As a side-effect of this change, the ARM_TSP_RAM_LOCATION macro cannot
be used to control the load address of BL32 in AArch32 mode which was
never the intention of the macro anyway.
2. A static assert is added to sp_min linker script to check that the progbits
are within the bounds expected when overlaid with other images.
3. Fix specifying `SPD` when building Juno for AArch32 mode. Due to the quirks
involved when building Juno for AArch32 mode, the build option SPD needed to
specifed. This patch corrects this and also updates the documentation in the
user-guide.
4. Exclude BL31 from the build and FIP when building Juno for AArch32 mode. As
a result the previous assumption that BL31 must be always present is removed
and the certificates for BL31 is only generated if `NEED_BL31` is defined.
Change-Id: I1c39bbc0abd2be8fbe9f2dea2e9cb4e3e3e436a8
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
The Cortex A75 has 5 AMU counters. The first three counters are fixed
and the remaining two are programmable.
A new build option is introduced, `ENABLE_AMU`. When set, the fixed
counters will be enabled for use by lower ELs. The programmable
counters are currently disabled.
Change-Id: I4bd5208799bb9ed7d2596e8b0bfc87abbbe18740
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
This patch replaces the macro ASM_ASSERTION with the macro
ENABLE_ASSERTIONS in ARM Cortex-A53/57/72 MPCore Processor
related files. There is build error when ASM_ASSERTION is set
to 1 and ENABLE_ASSERTIONS is set to 0 because function
asm_assert in common/aarch32/debug.S is defined in the macro
ENABLE_ASSERTIONS but is called with the macro ASM_ASSERTION.
There is also the indication to use ENABLE_ASSERTIONS but not
ASM_ASSERTION in the Makefile.
Signed-off-by: Matt Ma <matt.ma@spreadtrum.com>
The flag support the following values:
- sha256 (default)
- sha384
- sha512
Change-Id: I7a49d858c361e993949cf6ada0a86575c3291066
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>
It is not possible to detect at compile-time whether support for an
optional extension such as SPE should be enabled based on the
ARM_ARCH_MINOR build option value. Therefore SPE is now enabled by
default.
Change-Id: I670db164366aa78a7095de70a0962f7c0328ab7c
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
The implementation currently supports only interrupt-based SDEI events,
and supports all interfaces as defined by SDEI specification version
1.0 [1].
Introduce the build option SDEI_SUPPORT to include SDEI dispatcher in
BL31.
Update user guide and porting guide. SDEI documentation to follow.
[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0054a/ARM_DEN0054A_Software_Delegated_Exception_Interface.pdf
Change-Id: I758b733084e4ea3b27ac77d0259705565842241a
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
EHF is a framework that allows dispatching of EL3 interrupts to their
respective handlers in EL3.
This framework facilitates the firmware-first error handling policy in
which asynchronous exceptions may be routed to EL3. Such exceptions may
be handed over to respective exception handlers. Individual handlers
might further delegate exception handling to lower ELs.
The framework associates the delegated execution to lower ELs with a
priority value. For interrupts, this corresponds to the priorities
programmed in GIC; for other types of exceptions, viz. SErrors or
Synchronous External Aborts, individual dispatchers shall explicitly
associate delegation to a secure priority. In order to prevent lower
priority interrupts from preempting higher priority execution, the
framework provides helpers to control preemption by virtue of
programming Priority Mask register in the interrupt controller.
This commit allows for handling interrupts targeted at EL3. Exception
handlers own interrupts by assigning them a range of secure priorities,
and registering handlers for each priority range it owns.
Support for exception handling in BL31 image is enabled by setting the
build option EL3_EXCEPTION_HANDLING=1.
Documentation to follow.
NOTE: The framework assumes the priority scheme supported by platform
interrupt controller is compliant with that of ARM GIC architecture (v2
or later).
Change-Id: I7224337e4cea47c6ca7d7a4ca22a3716939f7e42
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
A Secure Partition is a software execution environment instantiated in
S-EL0 that can be used to implement simple management and security
services. Since S-EL0 is an unprivileged exception level, a Secure
Partition relies on privileged firmware e.g. ARM Trusted Firmware to be
granted access to system and processor resources. Essentially, it is a
software sandbox that runs under the control of privileged software in
the Secure World and accesses the following system resources:
- Memory and device regions in the system address map.
- PE system registers.
- A range of asynchronous exceptions e.g. interrupts.
- A range of synchronous exceptions e.g. SMC function identifiers.
A Secure Partition enables privileged firmware to implement only the
absolutely essential secure services in EL3 and instantiate the rest in
a partition. Since the partition executes in S-EL0, its implementation
cannot be overly complex.
The component in ARM Trusted Firmware responsible for managing a Secure
Partition is called the Secure Partition Manager (SPM). The SPM is
responsible for the following:
- Validating and allocating resources requested by a Secure Partition.
- Implementing a well defined interface that is used for initialising a
Secure Partition.
- Implementing a well defined interface that is used by the normal world
and other secure services for accessing the services exported by a
Secure Partition.
- Implementing a well defined interface that is used by a Secure
Partition to fulfil service requests.
- Instantiating the software execution environment required by a Secure
Partition to fulfil a service request.
Change-Id: I6f7862d6bba8732db5b73f54e789d717a35e802f
Co-authored-by: Douglas Raillard <douglas.raillard@arm.com>
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: Achin Gupta <achin.gupta@arm.com>
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
If ARMv7 based platform does not set ARM_CORTEX_Ax=yes, platform
shall define ARMV7_SUPPORTS_GENERIC_TIMER to enable generic timer
support.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
ARMv7-A Virtualization extensions brings new instructions and resources
that were supported by later architectures. Reference ARM ARM Issue C.c
[DDI0406C_C].
ERET and extended MSR/MRS instructions, as specified in [DDI0406C_C] in
ID_PFR1 description of bits[15:12] (Virtualization Extensions):
A value of 0b0001 implies implementation of the HVC, ERET, MRS
(Banked register), and MSR (Banked register) instructions. The ID_ISARs
do not identify whether these instructions are implemented.
UDIV/SDIV were introduced with the Virtualization extensions, even if
not strictly related to the virtualization extensions.
If ARMv7 based platform does not set ARM_CORTEX_Ax=yes, platform
shall define ARMV7_SUPPORTS_VIRTUALIZATION to enable virtualization
extension related resources.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
ARCH_SUPPORTS_LARGE_PAGE_ADDRESSING allows build environment to
handle specific case when target ARMv7 core only supports 32bit MMU
descriptor mode.
If ARMv7 based platform does not set ARM_CORTEX_Ax=yes, platform
shall define ARMV7_SUPPORTS_LARGE_PAGE_ADDRESSING to enable
large page addressing support.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
External build environment shall sets directive ARM_ARCH_MAJOR to 7
to specify a target ARMv7-A core.
As ARM-TF expects AARCH to be set, ARM_ARCH_MAJOR==7 mandates
AARCH=aarch32.
The toolchain target architecture/cpu is delegated after the platform
configuration is parsed. Platform shall define target core through
ARM_CORTEX_A<x>=yes, <x> being 5, 7, 9, 12, 15 and/or 17.
Platform can bypass ARM_CORTEX_A<x>=yes directive and provide straight
the toolchain target directive through MARCH32_DIRECTIVE.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Some platforms (for ex. UniPhier) want to create files in the very
top of the build directory. Add ${BUILD_PLAT} so such files can
depend on it.
Make existing directory targets depend on ${BUILD_PLAT} because
they are sub-directories of ${BUILD_PLAT}.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The back end GIC driver converts and assigns the interrupt type to
suitable group.
For GICv2, a build option GICV2_G0_FOR_EL3 is introduced, which
determines to which type Group 0 interrupts maps to.
- When the build option is set 0 (the default), Group 0 interrupts are
meant for Secure EL1. This is presently the case.
- Otherwise, Group 0 interrupts are meant for EL3. This means the SPD
will have to synchronously hand over the interrupt to Secure EL1.
The query API allows the platform to query whether the platform supports
interrupts of a given type.
API documentation updated.
Change-Id: I60fdb4053ffe0bd006b3b20914914ebd311fc858
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This is a revamp of the original approach in:
https://github.com/ARM-software/arm-trusted-firmware/pull/747
Current build system has no means to automatically generate dtbs from
dts, instead, stores the dtbs in the fdts/ folder. While this makes
perfect sense for many reference platforms, this becomes a minor
breakage in development flow for newer platforms.
However, this can be solved by providing a rule for the dtbs while
building the ATF binaries by purely describing which dts sources we
need.
For example, with this change, we will now be able to describe the
dtbs we need for the platform in the corresponding platform.mk file:
FDT_SOURCES += fdts/abc.dts
This should be able to generate the abc.dtb appropriately.
Since device trees are specification of hardware, we don't tie the rule
to any specific BL, instead a generic rule is introduced.
Further, this approach allows us to generate appropriate dtbs which may be
need to be regenerated when a common dtsi gets updated, by just
restricting changes to the dtsi alone, instead of synchronizing all the
dtbs as well.
If dtc is not available in default paths, but is available in an
alternate location, it can be chosen by overriding the DTC variable
such as 'make DTC=~/dtc/dtc ....`
NOTE: dtbs are built only with the explicit make dtbs command. The rule
is only available if the platform defines a FDT_SOURCES variable.
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
The `KEY_ALG` variable is used to select the algorithm for key
generation by `cert_create` tool for signing the certificates. This
variable was previously undocumented and did not have a global default
value. This patch corrects this and also adds changes to derive the
value of `TF_MBEDTLS_KEY_ALG` based on `KEY_ALG` if it not set by the
platform. The corresponding assignment of these variables are also now
removed from the `arm_common.mk` makefile.
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I78e2d6f4fc04ed5ad35ce2266118afb63127a5a4
Since Trusted OS firmware may have extra images, need to
assign new uuid and image id for them.
The TBBR chain of trust has been extended to add support
for the new images within the existing Trusted OS firmware
content certificate.
Change-Id: I678dac7ba1137e85c5779b05e0c4331134c10e06
Signed-off-by: Summer Qin <summer.qin@arm.com>
The current build system and driver requires the CCI product to be
specified at build time. The device constraints can be determined at run
time from its ID registers, obviating the need for specifying them
ahead.
This patch adds changes to identify and validate CCI at run time. Some
global variables are renamed to be in line with the rest of the code
base.
The build option ARM_CCI_PRODUCT_ID is now removed, and user guide is
updated.
Change-Id: Ibb765e349d3bc95ff3eb9a64bde1207ab710a93d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch defines the variable `LDLIBS` which allows external
libraries to be specified to 'ld' to enable it to link the
libraries.
Change-Id: I02a490eca1074063d00153ccb0ee974ef8859a0e
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Use TF_LDFLAGS from the Makefiles, and still append LDFLAGS as well to
the compiler's invocation. This allows passing extra options from the
make command line using LDFLAGS.
Document new LDFLAGS Makefile option.
Change-Id: I88c5ac26ca12ac2b2d60a6f150ae027639991f27
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
SPE is only supported in non-secure state. Accesses to SPE specific
registers from SEL1 will trap to EL3. During a world switch, before
`TTBR` is modified the SPE profiling buffers are drained. This is to
avoid a potential invalid memory access in SEL1.
SPE is architecturally specified only for AArch64.
Change-Id: I04a96427d9f9d586c331913d815fdc726855f6b0
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
It doesn't make sense to use the `-pedantic` flag when building the
Trusted Firmware as we use GNU extensions and so our code is not
fully ISO C compliant. This flag only makes sense if the code intends to
be ISO C compliant.
Change-Id: I6273564112759ff57f03b273f5349733a5f38aef
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Platforms aligned with TBBR are supposed to use their own OIDs, but
defining the same macros with different OIDs does not provide any
value (at least technically).
For easier use of TBBR, this commit allows platforms to reuse the OIDs
obtained by ARM Ltd. This will be useful for non-ARM vendors that
do not need their own extension fields in their certificate files.
The OIDs of ARM Ltd. have been moved to include/tools_share/tbbr_oid.h
Platforms can include <tbbr_oid.h> instead of <platform_oid.h> by
defining USE_TBBR_DEFS as 1. USE_TBBR_DEFS is 0 by default to keep the
backward compatibility.
For clarification, I inserted a blank line between headers from the
include/ directory (#include <...>) and ones from a local directory
(#include "..." ).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The current assert_boolean does not work with variables assigned with
'=' flavor instead of ':='.
For example,
FOO = $(BAR)
BAR := 1
Here, $(value FOO) is evaluated to $(BAR), not 1. This is not what
we expect. While I am here, I simplified the implementation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch adds `TRUSTED_BOARD_BOOT` support for AArch32 mode.
To build this patch the "mbedtls/include/mbedtls/bignum.h"
needs to be modified to remove `#define MBEDTLS_HAVE_UDBL`
when `MBEDTLS_HAVE_INT32` is defined. This is a workaround
for "https://github.com/ARMmbed/mbedtls/issues/708"
NOTE: TBBR support on Juno AArch32 is not currently supported.
Change-Id: I86d80e30b9139adc4d9663f112801ece42deafcf
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Co-Authored-By: Yatharth Kochar <yatharth.kochar@arm.com>
To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.
NOTE: Files that have been imported by FreeBSD have not been modified.
[0]: https://spdx.org/
Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Some recent changes have added direct use of the echo command without
parameters. This fails on a Windows shell, because echo without
parameters reports the mode ("ECHO is on").
This is corrected using the ECHO_BLANK_LINE macro already provided
for that purpose.
Change-Id: I5fd7192861b4496f6f46b4f096e80a752cd135d6
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
2 problems were found, but are in one change to avoid submitting a patch
that might fail to build. The problems were:
1. The macro MAKE_PREREQ_DIR has a minor bug, in that it is capable of
generating recursive dependencies.
2. The inclusion of BUILD_DIR in TEMP_OBJ_DIRS left no explicit
dependency, BUILD_DIR might not exist when subdirectories are
created by a thread on another CPU.
This fix corrects these with the following changes:
1. MAKE_PREREQ_DIR does nothing for a direct self dependency.
2. BUILD_DIR is built using MAKE_PREREQ_DIR.
3. BUILD_DIR is an explicit prerequisite of all OBJ_DIRS.
Change-Id: I938cddea4a006df225c02a47b9cf759212f27fb7
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
This patch introduces a build option to enable D-cache early on the CPU
after warm boot. This is applicable for platforms which do not require
interconnect programming to enable cache coherency (eg: single cluster
platforms). If this option is enabled, then warm boot path enables
D-caches immediately after enabling MMU.
FixesARM-Software/tf-issues#456
Change-Id: I44c8787d116d7217837ced3bcf0b1d3441c8d80e
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Introduce new build option ENABLE_STACK_PROTECTOR. It enables
compilation of all BL images with one of the GCC -fstack-protector-*
options.
A new platform function plat_get_stack_protector_canary() is introduced.
It returns a value that is used to initialize the canary for stack
corruption detection. Returning a random value will prevent an attacker
from predicting the value and greatly increase the effectiveness of the
protection.
A message is printed at the ERROR level when a stack corruption is
detected.
To be effective, the global data must be stored at an address
lower than the base of the stacks. Failure to do so would allow an
attacker to overwrite the canary as part of an attack which would void
the protection.
FVP implementation of plat_get_stack_protector_canary is weak as
there is no real source of entropy on the FVP. It therefore relies on a
timer's value, which could be predictable.
Change-Id: Icaaee96392733b721fa7c86a81d03660d3c1bc06
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
The boolean build option HW_ASSISTED_COHERENCY is introduced to enable
various optimizations in ARM Trusted Software, when built for such
systems. It's set to 0 by default.
Change-Id: I638390da6e1718fe024dcf5b402e07084f1eb014
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The ARMv8v.1 architecture extension has introduced support for far
atomics, which includes compare-and-swap. Compare and Swap instruction
is only available for AArch64.
Introduce build options to choose the architecture versions to target
ARM Trusted Firmware:
- ARM_ARCH_MAJOR: selects the major version of target ARM
Architecture. Default value is 8.
- ARM_ARCH_MINOR: selects the minor version of target ARM
Architecture. Default value is 0.
When:
(ARM_ARCH_MAJOR > 8) || ((ARM_ARCH_MAJOR == 8) && (ARM_ARCH_MINOR >= 1)),
for AArch64, Compare and Swap instruction is used to implement spin
locks. Otherwise, the implementation falls back to using
load-/store-exclusive instructions.
Update user guide, and introduce a section in Firmware Design guide to
summarize support for features introduced in ARMv8 Architecture
Extensions.
Change-Id: I73096a0039502f7aef9ec6ab3ae36680da033f16
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The current fiptool packs all the images without any padding between
them. So, the offset to each image has no alignment. This is not
efficient, for example, when the FIP is read from a block-oriented
device.
For example, (e)MMC is accessed by block-addressing. The block size
is 512 byte. So, the best case is each image is aligned by 512 byte
since the DMA engine can transfer the whole of the image to its load
address directly. The worst case is the offset does not have even
DMA-capable alignment (this is where we stand now). In this case,
we need to transfer every block to a bounce buffer, then do memcpy()
from the bounce buffer to our final destination. At least, this
should work with the abstraction by the block I/O layer, but the
CPU-intervention for the whole data transfer makes it really slow.
This commit adds a new option --align to the fiptool. This option,
if given, requests the tool to align each component in the FIP file
by the specified byte. Also, add a new Make option FIP_ALIGN for
easier access to this feature; users can give something like
FIP_ALIGN=512 from the command line, or add "FIP_ALIGN := 512" to
their platform.mk file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Soren reports build fails if -j option is given:
$ make -j16 CROSS_COMPILE=aarch64-linux-gnu-
Building fvp
make: *** No rule to make target 'build/fvp/release/bl1/',
needed by 'build/fvp/release/bl1/bl1.ld'. Stop.
make: *** Waiting for unfinished jobs....
The cause of the failure is that $(dir ) leaves a trailing / on the
directory names. It must be ripped off to let Make create the
directory.
There are some ways to fix the issue. Here, I chose to make MAKE_LD
look like MAKE_C and MAKE_S because bl*_dirs seems the central place
of making directories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
This adds a phony target for each dependency other than the main
file, causing each to depend on nothing.
Without this, the incremental build will fail when a header file
is removed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, .d files are generated before any objects are built.
So, IS_ANYTHING_TO_BUILD flag is needed to avoid such processing for
non-build targets.
There is a cleverer way; just create a .d file simultaneously when
the corresponding object is created. No need to have separate rules
for .d files.
This commit will also fix a bug; -D$(IMAGE) is defined for $(OBJ),
but not for $(PREREQUISITES). So, .d files are generated with
different macro sets from those for .o files, then wrong .d files
are generated.
For example, in lib/cpus/aarch64/cpu_helpers.S
#if IMAGE_BL31
#include <cpu_data.h>
#endif
<cpu_data.h> is parsed for the object when built for BL31, but the
.d file does not pick up that dependency.
With this commit, the compiler will generate .o and .d at the same
time, guaranteeing they are generated under the same circumstances.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Using AS for pre-processing looks a bit weird, and some assembly
specific options are given for nothing. Rather, use CPP.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The -c flag should not be included in the global variable TF_CFLAGS;
it should be specified in the build rule only when its target is a
*.o file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Some files have incorrect copyright notices, this patch fixes all
files with deviations from the standard notice.
Change-Id: I66b73e78a50a235acb55f1e2ec2052a42c0570d2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
When build variables are assigned or processed en masse, they'd appear
neater in alphabetical order.
Static initializations are moved to a separate file,
make_helpers/defaults.mk, which in itself is sorted alphabetically.
No functional changes.
Change-Id: I966010042b33de6b67592fb9ffcef8fc44d7d128
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
fiptool provides a more consistent and intuitive interface compared to
the fip_create program. It serves as a better base to build on more
features in the future.
fiptool supports various subcommands. Below are the currently
supported subcommands:
1) info - List the images contained in a FIP file.
2) create - Create a new FIP file with the given images.
3) update - Update an existing FIP with the given images.
4) unpack - Extract a selected set or all the images from a FIP file.
5) remove - Remove images from a FIP file. This is a new command that
was not present in fip_create.
To create a new FIP file, replace "fip_create" with "fiptool create".
To update a FIP file, replace "fip_create" with "fiptool update".
To dump the contents of a FIP file, replace "fip_create --dump" with
"fiptool info".
A compatibility script that emulates the basic functionality of
fip_create is provided. Existing scripts might or might not work with
the compatibility script. Users are strongly encouraged to migrate to
fiptool.
FixesARM-Software/tf-issues#87FixesARM-Software/tf-issues#108FixesARM-Software/tf-issues#361
Change-Id: I7ee4da7ac60179cc83cf46af890fd8bc61a53330
The user can provide additional CFLAGS to use when building TF.
However, these custom CFLAGS are currently prepended to the
standard CFLAGS that are hardcoded in the TF build system. This
is an issue because when providing conflicting compiler flags
(e.g. different optimisations levels like -O1 and -O0), the last
one on the command line usually takes precedence. This means that
the user flags get overriden.
To address this problem, this patch separates the TF CFLAGS from
the user CFLAGS. The former are now stored in the TF_CFLAGS make
variable, whereas the CFLAGS make variable is untouched and reserved
for the user. The order of the 2 sets of flags is enforced when
invoking the compiler.
FixesARM-Software/tf-issues#350
Change-Id: Ib189f44555b885f1dffbec6015092f381600e560
To get round problems encountered when building in a DOS build
environment the generation of the .o file containing build identifier
strings is modified.
The problems encounterred were:
1. DOS echo doesn't strip ' characters from the output text.
2. git is not available from CMD.EXE so the BUILD_STRING value needs
some other origin.
A BUILD_STRING value of "development build" is used for now.
MAKE_BUILD_STRINGS is used to customise build string generation in a DOS
environment. This variable is not defined in the UNIX build environment
make file helper, and so the existing build string generation behaviour
is retained in these build environments.
NOTE: This commit completes a cumulative series aimed at improving
build portability across development environments.
This enables the build to run on several new build environments,
if the relevant tools are available.
At this point the build is tested on Windows 7 Enterprise SP1,
using CMD.EXE, Cygwin and Msys (MinGW),as well as a native
Linux envionment". The Windows platform builds used
aarch64-none-elf-gcc.exe 4.9.1. CMD.EXE and Msys used Gnu
Make 3.81, cygwin used Gnu Make 4.1.
CAVEAT: The cert_create tool build is not tested on the Windows
platforms (openssl-for-windows has a GPL license).
Change-Id: Iaa4fc89dbe2a9ebae87e2600c9eef10a6af30251
Because of command differences in some build environments the "inline"
method of generating the build directory structure is not portable.
(e.g. in DOS environments the mkdir shell command fails if a directory
already exists, whereas in UNIX environments it succeeds.)
To improve portability we generate the directories needed using make,
but use the "order-only prerequisites" feature of make to prevent writes
of files into the directories generating re-builds, as suggested in the
GNU make Manual (Version 4.1 September 2014).
Change-Id: Ic9af475831063c7fe6f8bccffef184d79e799419
In some build environments executable programs have a specific file
extension. The value of BIN_EXT is appended to the relevant tool file
names to allow for this.
The value of BIN_EXT is set, where appropriate, by the build environment
specific make helper (to .exe for Windows build environments).
.gitignore is updated to hide the new (.exe) files.
Change-Id: Icc32f64b750e425265075ad4e0dea18129640b86
Add make helper files to select the appropriate settings for the build
environment. Selection is made in make_helpers/build_env.mk, which
selects other files to include using generic build environment settings.
The Trusted Firmware Makefile and supporting tool Makefiles are updated
to include build_env.mk instead of unix.mk.
NOTE: This change does not fully enable builds in other build
environments. It facilitates this without compromising the
existing build environments.
Change-Id: Ic4064ffe6ce158bbd16d7cc9f27dd4655a3580f6
To help diagnose make problems, we report an error if the make
program used does not provide the $(eval ) make functionality.
This will detect early versions of GNU make and other make programs.
Change-Id: I0ebb0f63694cf0b04eaeb7ea1e9e172fb9770ce0
Macros are inserted to replace direct invocations of commands that are
problematic on some build environments. (e.g. Some environments expect
\ in paths instead of /.)
The changes take into account mismatched command mappings across
environments.
The new helper file unix.mk retains existing makefile behaviour on unix
like build environments by providing the following macro definitions:
SHELL_COPY cp -f
SHELL_COPY_TREE cp -rf
SHELL_DELETE rm -f
SHELL_DELETE_ALL rm -rf
MAKE_PREREQ_DIR mkdir -p (As make target)
SHELL_REMOVE_DIR rm -rf
Change-Id: I1b5ca5e1208e78230b15284c4af00c1c006cffcb
As an initial stage of making Trusted Firmware build environment more
portable, we remove most uses of the $(shell ) function and replace them
with more portable make function based solutions.
Note that the setting of BUILD_STRING still uses $(shell ) since it's
not possible to reimplement this as a make function. Avoiding invocation
of this on incompatible host platforms will be implemented separately.
Change-Id: I768e2f9a265c78814a4adf2edee4cc46cda0f5b8
This patch adds non-volatile counter support to the Certificate
Generation tool. The TBBR Chain of Trust definition in the tool
has been extended to include the counters as certificate extensions.
The counter values can be specified in the command line.
The following default counter values are specified in the build
system:
* Trusted FW Non-Volatile counter = 0
* Non-Trusted FW Non-Volatile counter = 0
These values can be overridden by the platform at build time.
Change-Id: I7ea10ee78d72748d181df4ee78a7169b3ef2720c
This allows reproducible builds (same source and same compiler produce
bit-identical results) and also allows coordinating the timestamp across
multiple projects, eg. with another firmware.
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
The fip_create tool specifies images in the command line using the
ARM TF naming convention (--bl2, --bl31, etc), while the cert_create
tool uses the TBBR convention (--tb-fw, --soc-fw, etc). This double
convention is confusing and should be aligned.
This patch updates the fip_create command line options to follow the
TBBR naming convention. Usage examples in the User Guide have been
also updated.
NOTE: users that build the FIP by calling the fip_create tool directly
from the command line must update the command line options in their
scripts. Users that build the FIP by invoking the main ARM TF Makefile
should not notice any difference.
Change-Id: I84d602630a2585e558d927b50dfde4dd2112496f
This patch removes the dash character from the image name, to
follow the image terminology in the Trusted Firmware Wiki page:
https://github.com/ARM-software/arm-trusted-firmware/wiki
Changes apply to output messages, comments and documentation.
non-ARM platform files have been left unmodified.
Change-Id: Ic2a99be4ed929d52afbeb27ac765ceffce46ed76
This patch replaces all references to the SCP Firmware (BL0, BL30,
BL3-0, bl30) with the image terminology detailed in the TF wiki
(https://github.com/ARM-software/arm-trusted-firmware/wiki):
BL0 --> SCP_BL1
BL30, BL3-0 --> SCP_BL2
bl30 --> scp_bl2
This change affects code, documentation, build system, tools and
platform ports that load SCP firmware. ARM plaforms have been
updated to the new porting API.
IMPORTANT: build option to specify the SCP FW image has changed:
BL30 --> SCP_BL2
IMPORTANT: This patch breaks compatibility for platforms that use BL2
to load SCP firmware. Affected platforms must be updated as follows:
BL30_IMAGE_ID --> SCP_BL2_IMAGE_ID
BL30_BASE --> SCP_BL2_BASE
bl2_plat_get_bl30_meminfo() --> bl2_plat_get_scp_bl2_meminfo()
bl2_plat_handle_bl30() --> bl2_plat_handle_scp_bl2()
Change-Id: I24c4c1a4f0e4b9f17c9e4929da815c4069549e58
Firmware update feature needs a new FIP called `fwu_fip.bin` that
includes Secure(SCP_BL2U, BL2U) and Normal world(NS_BL2U) images
along with the FWU_CERT certificate in order for NS_BL1U to load
the images and help the Firmware update process to complete.
This patch adds the capability to support the new target `fwu_fip`
which includes above mentioned FWU images in the make files.
The new target of `fwu_fip` and its dependencies are included for
compilation only when `TRUSTED_BOARD_BOOT` is defined.
Change-Id: Ie780e3aac6cbd0edfaff3f9af96a2332bd69edbc
The Firmware Update (FWU) feature needs support for an optional
secure world image, BL2U, to allow additional secure world
initialization required by FWU, for example DDR initialization.
This patch adds generic framework support to create BL2U.
NOTE: A platform makefile must supply additional `BL2U_SOURCES`
to build the bl2u target. A subsequent patch adds bl2u
support for ARM platforms.
Change-Id: If2ce036199bb40b39b7f91a9332106bcd4e25413
This patch adds `uppercase` macro to prepare IMAGE_BLxx defines
used for conditional compilation and to prepare variables used
for defining BL source and linker file names.
This change is needed for upcoming BL images that can have names
which uses both letters and numbers.
Change-Id: I05ce9bcd0d221a54db92c0fe3ad28e9e0080ed2e
If an SPD wants to use a prebuilt binary as BL32 image (for example,
the OPTEE Dispatcher), it must point the `BL32` variable to the
image file. This dependency should apply only to the `fip` target.
However, it also applies to the `all` target at the moment. If the
user tries to build all individual TF images using `make all`
without setting BL32, the build fails. The following command will
throw the error:
make CROSS_COMPILE=aarch64-linux-gnu- SPD=opteed all
...
...
aarch64-linux-gnu-gcc: fatal error: no input files
compilation terminated.
make: *** [build/fvp/release/bl32/bl32.ld] Error 1
The reason is that the build system checks if BL32 is defined, and
if it is not, it will try to build BL32 from source. If the SPD
makefile does not provide support for that (as is the case of the
OPTEE Dispatcher, since OPTEE is provided as an external binary),
the build will fail.
This patch fixes the issue by checking if `BL32_SOURCES` has been
defined by the SPD before attempting to build BL32 from source.
If neither `BL32` nor `BL32_SOURCES` is defined when building the
FIP, a warning message will be printed and the process aborted.
FixesARM-software/tf-issues#333
Change-Id: I5e801ad333103ed9b042e5c4757424c8df2ff6e4
Currently, if no make goal is specified in the command line, 'all'
is assumed by default, but the dependency files are not generated.
This might lead to a successful but inconsistent build. This patch
provides a fix to the problem.
Change-Id: I0148719e114dbdbe46f8a57c7d05da7cbc212c92
This patch is a complete rework of the main Makefile. Functionality
remains the same but the code has been reorganized in sections in
order to improve readability and facilitate adding future extensions.
A new file 'build_macros.mk' has been created and will contain common
definitions (variables, macros, etc) that may be used from the main
Makefile and other platform specific makefiles.
A new macro 'FIP_ADD_IMG' has been introduced and it will allow the
platform to specify binary images and the necessary checks for a
successful build. Platforms that require a BL30 image no longer need
to specify the NEED_BL30 option. The main Makefile is now completely
unaware of additional images not built as part of Trusted Firmware,
like BL30. It is the platform responsibility to specify images using
the macro 'FIP_ADD_IMG'. Juno uses this macro to include the BL30
image in the build.
BL33 image is specified in the main Makefile to preserve backward
compatibility with the NEED_BL33 option. Otherwise, platform ports
that rely on the definition of NEED_BL33 might break.
All Trusted Board Boot related definitions have been moved to a
separate file 'tbbr_tools.mk'. The main Makefile will include this
file unless the platform indicates otherwise by setting the variable
'INCLUDE_TBBR_MK := 0' in the corresponding platform.mk file. This
will keep backward compatibility but ideally each platform should
include the corresponding TBB .mk file in platform.mk.
Change-Id: I35e7bc9930d38132412e950e20aa2a01e2b26801
Antonio Nino Diaz
Usama Arif
Varun Wadekar
Manish Pandey
Jeenu Viswambharan
Sathees Balya
Soby Mathew
Andre Przywara
Daniel Boulby
Roberto Vargas
Yann Gautier
Konstantin Porotchkin
Jiafei Pan
davidcunado-arm
Heyi Guo
Stephen Warren
Dan Handley
Dimitris Papastamos
Masahiro Yamada
Julius Werner
Matt Ma
Qixiang Xu
Etienne Carriere
Nishanth Menon
Summer Qin
Douglas Raillard
Evan Lloyd
Soren Brinkmann
Sandrine Bailleux
Juan Castillo
Patrick Georgi
Yatharth Kochar