Changes stm32mp1 reset driver to API to add a timeout argument
to stm32mp_reset_assert() and stm32mp_reset_deassert() and
a return value.
With a supplied timeout, the functions wait the target reset state
is reached before returning. With a timeout of zero, the functions
simply load target reset state in SoC interface and return without
waiting.
Helper functions stm32mp_reset_set() and stm32mp_reset_release()
use a zero timeout and return without a return code.
This change updates few stm32 drivers and plat/stm32mp1 blé_plat_setup.c
accordingly without any functional change.
functional change.
Change-Id: Ia1a73a15125d3055fd8739c125b70bcb9562c27f
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
The patch fixes BL31 linker script error
"Init code ends past the end of the stacks"
for platforms with number of CPUs less than 4,
which is caused by __STACKS_END__ address being
lower than __INIT_CODE_END__.
The modified BL31 linker script detects such cases
and increases the total amount of stack memory,
setting __STACKS_END__ = __INIT_CODE_END__, and
CPUs' stacks are calculated by BL31 'plat_get_my_stack'
function accordingly. For platforms with more than 4 CPUs
and __INIT_CODE_END__ < __STACKS_END__ stack memory does not
increase and allocated CPUs' stacks match the existing
implementation.
The patch removes exclusion of PSCI initialization
functions from the reclaimed .init section in
'arm_reclaim_init.ld.S' script, which increases the
size of reclaimed memory region.
Change-Id: I927773e00dd84e1ffe72f9ee534f4f2fc7b6153c
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch fixes wrong ID_AA64DFR0_EL1 register read instead of
ID_AA64PFR0_EL1 to detect support for MPAM extension.
It also implements get_mpam_version() function which returns
MPAM version as:
0x00: None Armv8.0 or later;
0x01: v0.1 Armv8.4 or later;
0x10: v1.0 Armv8.2 or later;
0x11: v1.1 Armv8.4 or later;
Change-Id: I31d776b1a1b60cb16e5e62296d70adb129d7b760
Reported-by: Matteo Zini <matteozini96@gmail.com>
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
SPCI is renamed as PSA FF-A which stands for Platform Security
Architecture Firmware Framework for A class processors.
This patch replaces the occurrence of SPCI with PSA FF-A(in documents)
or simply FFA(in code).
Change-Id: I4ab10adb9ffeef1ff784641dfafd99f515133760
Signed-off-by: J-Alves <joao.alves@arm.com>
This patch introduces the populate function which leverages
a new driver to extract base address and clk frequency properties
of the uart serial node from HW_CONFIG device tree.
This patch also introduces fdt helper API fdtw_translate_address()
which helps in performing address translation.
Change-Id: I053628065ebddbde0c9cb3aa93d838619f502ee3
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This patch enables the v8.6 extension to add a delay before WFE traps
are taken. A weak hook plat_arm_set_twedel_scr_el3 has been added in
plat/common/aarch64/plat_common.c that disables this feature by default
but platform-specific code can override it when needed.
The only hook provided sets the TWED fields in SCR_EL3, there are similar
fields in HCR_EL2, SCTLR_EL2, and SCTLR_EL1 to control WFE trap delays in
lower ELs but these should be configured by code running at EL2 and/or EL1
depending on the platform configuration and is outside the scope of TF-A.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I0a9bb814205efeab693a3d0a0623e62144abba2d
Removing FPEXC32_EL2 from the register save/restore routine for EL2
registers since it is already a part of save/restore routine for
fpregs.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I5ed45fdbf7c8efa8dcfcd96586328d4f6b256bc4
CoT used for BL1 and BL2 are moved to tbbr_cot_bl1.c
and tbbr_cot_bl2.c respectively.
Common CoT used across BL1 and BL2 are moved to
tbbr_cot_common.c.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2252ac8a6960b3431bcaafdb3ea4fb2d01b79cf5
This patch introduces dynamic configuration for SDEI setup and is supported
when the new build flag SDEI_IN_FCONF is enabled. Instead of using C arrays
and processing the configuration at compile time, the config is moved to
dts files. It will be retrieved at runtime during SDEI init, using the fconf
layer.
Change-Id: If5c35a7517ba00a9f258d7f3e7c8c20cee169a31
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Co-authored-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
During context switching from higher EL (EL2 or higher)
to lower EL can cause incorrect translation in TLB due to
speculative execution of AT instruction using out-of-context
translation regime.
Workaround is implemented as below during EL's (EL1 or EL2)
"context_restore" operation:
1. Disable page table walk using SCTLR.M and TCR.EPD0 & EPD1
bits for EL1 or EL2 (stage1 and stage2 disabled)
2. Save all system registers except TCR and SCTLR (for EL1 and EL2)
3. Do memory barrier operation (isb) to ensure all
system register writes are done.
4. Restore TCR and SCTLR registers (for EL1 and EL2)
Errata details are available for various CPUs as below:
Cortex-A76: 1165522
Cortex-A72: 1319367
Cortex-A57: 1319537
Cortex-A55: 1530923
Cortex-A53: 1530924
More details can be found in mail-chain:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-April/000445.html
Currently, Workaround is implemented as build option which is default
disabled.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: If8545e61f782cb0c2dda7ffbaf50681c825bd2f0
Currently BL2 passes TOS_FW_CONFIG address and size through registers to
BL31. This corresponds to SPMC manifest load address and size. The SPMC
manifest is mapped in BL31 by dynamic mapping. This patch removes BL2
changes from generic code (which were enclosed by SPD=spmd) and retrieves
SPMC manifest size directly from within SPMD. The SPMC manifest load
address is still passed through a register by generic code.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I35c5abd95c616ae25677302f0b1d0c45c51c042f
As a follow-up to bdd2596d4, and related to SPM Dispatcher
EL3 component and SPM Core S-EL2/S-EL1 component: update
with cosmetic and coding rules changes. In addition:
-Add Armv8.4-SecEL2 arch detection helper.
-Add an SPMC context (on current core) get helper.
-Return more meaningful error return codes.
-Remove complexity in few spmd_smc_handler switch-cases.
-Remove unused defines and structures from spmd_private.h
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I99e642450b0dafb19d3218a2f0e2d3107e8ca3fe
Oscillators, PLLs and some system clocks can be related straight to
a parent clock. Prior this change were only oscillators and few
clocks supported by this look up. This changes adds PLLs and other
system clocks. This enables for flexible use of clock tree exploration
when computing a clock frequency value.
Change-Id: I15ec98023a7095e3120a6954de59a4799d92c66b
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
The stdout-path property in the /chosen node of a DTB points to a device
node, which is used for boot console output.
On most (if not all) ARM based platforms this is the debug UART.
The ST platform code contains a function to parse this property and
chase down eventual aliases to learn the node offset of this UART node.
Introduce a slightly more generalised version of this ST platform function
in the generic fdt_wrappers code. This will be useful for other platforms
as well.
Change-Id: Ie6da47ace7833861b5e35fe8cba49835db3659a5
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The STM32 platform port parse DT nodes to find base address to
peripherals. It does this by using its own implementation, even though
this functionality is generic and actually widely useful outside of the
STM32 code.
Re-implement fdt_get_reg_props_by_name() on top of the newly introduced
fdt_get_reg_props_by_index() function, and move it to fdt_wrapper.c.
This is removes the assumption that #address-cells and #size-cells are
always one.
Change-Id: I6d584930262c732b6e0356d98aea50b2654f789d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment the fconf_populate_gicv3_config() implementation is
somewhat incomplete: First it actually fails to store the retrieved
information (the local addr[] array is going nowhere), but also it makes
quite some assumptions about the device tree passed to it: it needs to
use two address-cells and two size-cells, and also requires all five
register regions to be specified, where actually only the first two
are mandatory according to the binding (and needed by our code).
Fix this by introducing a proper generic function to retrieve "reg"
property information from a DT node:
We retrieve the #address-cells and #size-cells properties from the
parent node, then use those to extract the right values from the "reg"
property. The function takes an index to select one region of a reg
property.
This is loosely based on the STM32 implementation using "reg-names",
which we will subsume in a follow-up patch.
Change-Id: Ia59bfdf80aea4e36876c7b6ed4d153e303f482e8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The STM32 platform code uses its own set of FDT helper functions,
although some of them are fairly generic.
Remove the implementation of fdt_read_uint32_default() and implement it
on top of the newly introduced fdt_read_uint32() function, then convert
all users over.
This also fixes two callers, which were slightly abusing the "default"
semantic.
Change-Id: I570533362b4846e58dd797a92347de3e0e5abb75
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Our fdtw_read_cells() implementation goes to great lengths to
sanity-check every parameter and result, but leaves a big hole open:
The size of the storage the value pointer points at needs to match the
number of cells given. This can't be easily checked at compile time,
since we lose the size information by using a void pointer.
Regardless the current usage of this function is somewhat wrong anyways,
since we use it on single-element, fixed-length properties only, for
which the DT binding specifies the size.
Typically we use those functions dealing with a number of cells in DT
context to deal with *dynamically* sized properties, which depend on
other properties (#size-cells, #clock-cells, ...), to specify the number
of cells needed.
Another problem with the current implementation is the use of
ambiguously sized types (uintptr_t, size_t) together with a certain
expectation about their size. In general there is no relation between
the length of a DT property and the bitness of the code that parses the
DTB: AArch64 code could encounter 32-bit addresses (where the physical
address space is limited to 4GB [1]), while AArch32 code could read
64-bit sized properties (/memory nodes on LPAE systems, [2]).
To make this more clear, fix the potential issues and also align more
with other DT users (Linux and U-Boot), introduce functions to explicitly
read uint32 and uint64 properties. As the other DT consumers, we do this
based on the generic "read array" function.
Convert all users to use either of those two new functions, and make
sure we never use a pointer to anything other than uint32_t or uint64_t
variables directly.
This reveals (and fixes) a bug in plat_spmd_manifest.c, where we write
4 bytes into a uint16_t variable (passed via a void pointer).
Also we change the implementation of the function to better align with
other libfdt users, by using the right types (fdt32_t) and common
variable names (*prop, prop_names).
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi#n874
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/ecx-2000.dts
Change-Id: I718de960515117ac7a3331a1b177d2ec224a3890
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The device tree parsing code for the STM32 platform is using its own FDT
helper functions, some of them being rather generic.
In particular the existing fdt_read_uint32_array() implementation is now
almost identical to the new generic code in fdt_wrappers.c, so we can
remove the ST specific version and adjust the existing callers.
Compared to the original ST implementation the new version takes a
pointer to the DTB as the first argument, and also swaps the order of
the number of cells and the pointer.
Change-Id: Id06b0f1ba4db1ad1f733be40e82c34f46638551a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Currently our fdtw_read_array() implementation requires the length of
the property to exactly match the requested size, which makes it less
flexible for parsing generic device trees.
Also the name is slightly misleading, since we treat the cells of the
array as 32 bit unsigned integers, performing the endianess conversion.
To fix those issues and align the code more with other DT users (Linux
kernel or U-Boot), rename the function to "fdt_read_uint32_array", and
relax the length check to only check if the property covers at least the
number of cells we request.
This also changes the variable names to be more in-line with other DT
users, and switches to the proper data types.
This makes this function more useful in later patches.
Change-Id: Id86f4f588ffcb5106d4476763ecdfe35a735fa6c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Move the data section to the common header.
I slightly tweaked some scripts as follows:
[1] bl1.ld.S has ALIGN(16). I added DATA_ALIGN macro, which is 1
by default, but overridden by bl1.ld.S. Currently, ALIGN(16)
of the .data section is redundant because commit 4128659076
("Fix boot failures on some builds linked with ld.lld.") padded
out the previous section to work around the issue of LLD version
<= 10.0. This will be fixed in the future release of LLVM, so
I am keeping the proper way to align LMA.
[2] bl1.ld.S and bl2_el3.ld.S define __DATA_RAM_{START,END}__ instead
of __DATA_{START,END}__. I put them out of the .data section.
[3] SORT_BY_ALIGNMENT() is missing tsp.ld.S, sp_min.ld.S, and
mediatek/mt6795/bl31.ld.S. This commit adds SORT_BY_ALIGNMENT()
for all images, so the symbol order in those three will change,
but I do not think it is a big deal.
Change-Id: I215bb23c319f045cd88e6f4e8ee2518c67f03692
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
By writing 0 to CLUSTERPWRDN DSU register bit 0, we send an
advisory to the power controller that cluster power is not required
when all cores are powered down.
The AArch32 CLUSTERPWRDN register is architecturally mapped to the
AArch64 CLUSTERPWRDN_EL1 register
Change-Id: Ie6e67c1c7d811fa25c51e2e405ca7f59bd20c81b
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This patch adds support for GICv4 extension.
New `GIC_ENABLE_V4_EXTN` option passed to gicv3.mk makefile
was added, and enables GICv4 related changes when set to 1.
This option defaults to 0.
Change-Id: I30ebe1b7a98d3a54863900f37eda4589c707a288
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch adds code to parse memory range information passed by
coreboot, and a simple helper to test whether a specific address belongs
to a range. This may be useful for coreboot-using platforms that need to
know information about the system's memory layout (e.g. to check whether
an address passed in via SMC targets valid DRAM).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3bea326c426db27d1a8b7d6e17418e4850e884b4
bakery_lock_normal.c uses the raw register accessor, read_sctlr(_el3)
to check whether the dcache is enabled.
Using is_dcache_enabled() is cleaner, and a good abstraction for
the library code like this.
A problem is is_dcache_enabled() is declared in the local header,
lib/xlat_tables_v2/xlat_tables_private.h
I searched for a good place to declare this helper. Moving it to
arch_helpers.h, closed to cache operation helpers, looks good enough
to me.
I also changed the type of 'is_cached' to bool for consistency,
and to avoid MISRA warnings.
Change-Id: I9b016f67bc8eade25c316aa9c0db0fa4cd375b79
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch provides support for GICv3.1 extended PPI and SPI
range. The option is enabled by setting to 1 and passing
`GIC_EXT_INTID` build flag to gicv3.mk makefile.
This option defaults to 0 with no extended range support.
Change-Id: I7d09086fe22ea531c5df51a8a1efd8928458d394
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Attempts to address MISRA compliance issues in BL1, BL2, and BL31 code.
Mainly issues like not using boolean expressions in conditionals,
conflicting variable names, ignoring return values without (void), adding
explicit casts, etc.
Change-Id: If1fa18ab621b9c374db73fa6eaa6f6e5e55c146a
Signed-off-by: John Powell <john.powell@arm.com>
* changes:
doc: brcm: Add documentation file for brcm stingray platform
drivers: Add SPI Nor flash support
drivers: Add iproc spi driver
drivers: Add emmc driver for Broadcom platforms
Add BL31 support for Broadcom stingray platform
Add BL2 support for Broadcom stingray platform
Add bl31 support common across Broadcom platforms
Add bl2 setup code common across Broadcom platforms
drivers: Add support to retrieve plat_toc_flags
Present framework restricts platform to pass desired shareability attribute
for normal memory region mapped in MMU. it defaults to inner shareability.
There are platforms where memories (like SRAM) are not placed at snoopable
region in advaned interconnect like CCN/CMN hence snoopable transaction is
not possible to these memory. Though These memories could be mapped in MMU
as MT_NON_CACHEABLE, data caches benefits won't be available.
If these memories are mapped as cacheable with non-shareable attribute,
when only one core is running like at boot time, MMU data cached could be
used for faster execution. Hence adding support to pass the shareability
attribute for memory regions.
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Change-Id: I678cb50120a28dae4aa9d1896e8faf1dd5cf1754
Mark Dykes
Etienne Carriere
Alexei Fedorov
Olivier Deprez
J-Alves
Madhukar Pappireddy
johpow01
Manish Pandey
Max Shvetsov
Manish V Badarkhe
Varun Wadekar
Balint Dobszay
Andre Przywara
Sandrine Bailleux
Masahiro Yamada
Julius Werner
Pramod Kumar
Sheetal Tigadoli
joanna.farley