Added a sub-section in the "Processes and Policies" chapter under
Contributor's guide on how to add new build configurations when new
source files are added to the TF-A repository. This will help the patch
contributor to update their files to get analysed by Coverity Scan.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I71f410a061028f89bd0e984e48e61e5935616d71
BL2 passes FW_CONFIG to BL31 which contains information
about different DTBs present. BL31 then uses FW_CONFIG
to get the base address of HW_CONFIG and populate fconf.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I0b4fc83e6e0a0b9401f692516654eb9a3b037616
This avoids duplicate define of TZC_REGION_NSEC_ALL_ACCESS_RDWR.
And remove the previous TZC400 definitions from stm32mp1_def.h.
Change-Id: I6c72c2a18731f69d855fbce8ce822a21da9364fa
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add required code to support FCONF on STM32MP1 platform.
The new FW_CONFIG DT file will be inside the FIP, and loaded by BL2.
It will be used to configure the addresses where to load other binaries.
BL2 should be agnostic of which BL32 is in the FIP (OP-TEE or SP_min),
so optee_utils.c is always compiled, and some OP-TEE flags are removed.
Change-Id: Id957b49b0117864136250bfc416664f815043ada
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Instead of using a scratch buffer of 512 bytes, we can directly use the
image address and max size. The mmc_block_dev_spec struct info is then
overwritten for each image with this info, except FW_CONFIG and GPT
table which will still use the scratch buffer.
This allows using multiple blocks read on MMC, and so improves the boot
time.
A cache invalidate is required for the remaining data not used from the
first and last blocks read. It is not required for FW_CONFIG_ID,
as it is in scratch buffer in SYSRAM, and also because bl_mem_params
struct is overwritten in this case. This should also not be done if
the image is not found (OP-TEE extra binaries when using SP_min).
Change-Id: If3ecfdfe35bb9db66284036ca49c4bd1be4fd121
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BL2 still uses the STM32 header binary format to be loaded from ROM code.
BL32 and BL33 and their respective device tree files are now put together
in a FIP file.
One DTB is created for each BL. To reduce their sizes, 2 new dtsi file are
in charge of removing useless nodes for a given BL. This is done because
BL2 and BL32 share the same device tree files base.
The previous way of booting is still available, the compilation flag
STM32MP_USE_STM32IMAGE has to be set to 1 in the make command. Some files
are duplicated and their names modified with _stm32_ to avoid too much
switches in the code.
Change-Id: I1ffada0af58486d4cf6044511b51e56b52269817
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add bindings that will be used to define DDR regions
and their access rights.
Change-Id: I745a7e580ef2b9e251d53db12c5a0a86dfe34463
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add the UUID into the io policies node that are retrieved
by BL2 using stm32mp_fconf_io.c populate function.
Change-Id: I595d5a41a1e0a27fcc02ea2ab5495d9dbf0e6773
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Create all boards fw-config DT files. They all include a generic
stm32mp15-fw-config.dtsi.
Change-Id: Ib9ac8a59e93e01365001b0d11fee41f7c507c08e
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Rename the FF-A specification to:
Arm Firmware Framework for Arm A-profile
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I4f9d29409d048e7a49832b95d39d2583c1fb5792
Protect BL32 (SP_min) with MMU if OP-TEE is not used.
Validate OP-TEE header with optee_header_is_valid().
Use default values in bl2_mem_params_descs[]. They will be overwritten
in bl2_plat_handle_post_image_load() if OP-TEE is used.
Change-Id: I8614f3a17caa827561614d0f25f30ee90c4ec3fe
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
This new function optee_header_is_valid() allows platform to know
whether OP-TEE OS is loaded from multi-image (using OP-TEE header
image as BL32_IMAGE_ID) or from a single OP-TEE binary image.
The function tee_validate_header() is reworked to return a boolean,
and is now silent.
Change-Id: Idc7dde091f2ada8898f40d02e68c3834ca39d8e8
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Neoverse N2 erratum 2138956 is a Cat B erratum that applies to
revision r0p0 and is still open. This erratum can be avoided by
inserting a sequence of 16 DMB ST instructions prior to WFI or WFE.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I1aac87b3075992f875451e4767b21857f596d0b2
Neoverse N2 erratum 2189731 is a Cat B erratum that applies to
revision r0p0 and is still open. The workaround is to set
CPUACTLR5_EL1[44] to 1 which will cause the CPP instruction to
invalidate the hardware prefetcher state trained from any EL.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Iddc6a59adf9fa3cab560c46f2133e1f5a8b3ad03
Cortex-A710 erratum 2017096 is a Cat B erratum that applies to
revisions r0p0, r1p0 & r2p0 and is still open. The workaround is to
set CPUECLTR_EL1[8] to 1 which disables store issue prefetching.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: If5f61ec30dbc2fab7f2c68663996057086e374e3
Cortex-A710 erratum 2055002 is a Cat B erratum that applies to
revisions r1p0 & r2p0 and is still open. The workaround is to
set CPUACTLR_EL1[46] to force L2 tag ECC inline correction mode.
This workaround works on revision r1p0 & r2p0.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I67be1dce53c4651167d8cee33c116e73b9dafe81
* changes:
refactor(plat/nxp): refine api to read SVR register
refactor(plat/nxp): each errata use a seperate source file
refactor(plat/nxp): use a unified errata api
refactor(plat/soc-lx2160): move errata to common directory
Currently the list of SP UUIDs loaded by BL2 is hardcoded in the DT.
This is a problem when building a system with other SPs (e.g. from
Trusted Services). This commit implements a workaround to enable adding
SP UUIDs to the list at build time.
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Change-Id: Iff85d3778596d23d777dec458f131bd7a8647031
Addition of documents for platforms based on
NXP SoC LX2160A.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I39ac5a9eb0b668d26301a0a24a1e6bf87f245f02
Neoverse N2 erratum 2025414 is a Cat B erratum that applies to
revision r0p0 and is still open. The workaround is to set
CPUECLTR_EL1[8] to 1 which disables store issue prefetching.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ia1c63fb93a1bdb1c3f4cf019a197b2a59233885a
Neoverse N2 erratum 2067956 is a Cat B erratum that applies to
revision r0p0 and is still open. The workaround is to set
CPUACTLR_EL1[46] to force L2 tag ECC inline correction mode.
This workaround works on revision r0p0.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ie92d18a379c66675b5c1c50fd0b8dde130848b21
The FMU is part of the GIC Distributor (GICD) component. It implements
the following functionality in GIC-600AE:
* Provides software the means to enable or disable a Safety Mechanism
within a GIC block.
* Receives error signaling from all Safety Mechanisms within other GIC
blocks.
* Maintains error records for each GIC block, for software inspection
and provides information on the source of the error.
* Retains error records across functional reset.
* Enables software error recovery testing by providing error injection
capabilities in a Safety Mechanism.
This patch introduces support to enable error detection for all safety
mechanisms provided by the FMU. Platforms are expected to invoke the
initialization function during cold boot.
The support for the FMU is guarded by the GICV3_SUPPORT_GIC600AE_FMU
makefile variable. The default value of this variable is '0'.
Change-Id: I421c3d059624ddefd174cb1140a2d2a2296be0c6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Up until now we relied on the GICs used in our FPGA images to be GICv3
compliant, without the "direct virtual injection" feature (aka GICv4)
enabled.
To support newer images which have GICv4 compliant GICs, enable the
newly introduced GICv4 detection code, and use that also when we adjust
the redistributor region size in the devicetree.
This allows the same BL31 image to be used with GICv3 or GICv4 FPGA
images.
Change-Id: I9f6435a6d5150983625efe3650a8b7d1ef11b1d1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment we have a GIC_ENABLE_V4_EXTN build time variable to
determine whether the GIC interrupt controller is compliant to version
4.0 of the spec or not. This just changes the number of 64K MMIO pages
we expect per redistributor.
To support firmware builds which run on variable systems (emulators,
fast model or FPGAs), let's make this decision at runtime.
The GIC specification provides several architected flags to learn the
size of the MMIO frame per redistributor, we use GICR_TYPER[VLPI] here.
Provide a (static inline) function to return the size of each
redistributor.
We keep the GIC_ENABLE_V4_EXTN build time variable around, but change
its meaning to enable this autodetection code. Systems not defining this
rely on a "pure" GICv3 (as before), but platforms setting it to "1" can
now deal with both configurations.
Change-Id: I9ede4acf058846157a0a9e2ef6103bf07c7655d9
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment we have a GIC_ENABLE_V4_EXTN build time variable to
determine whether the GIC interrupt controller is compliant to version
4.0 of the GIC spec or not.
In case of the GIC-600 multichip support we were somewhat abusing that
flag to differentiate between a GIC-700 and GIC-600 implementation
being used in the system.
To avoid a build time dependency on this flag, look at the GICD_IIDR
register and check if the hardware is a GIC-600 or not, to make this
decision at runtime. We then use the values for either GIC-700 or the
GIC-600, respectively.
Change-Id: I8c09ec1cd6fd60d28da879ed55ffef5506f9869d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
For the GIC power management we need to identify certain GIC
implementations, so we have the IIDR values for some Arm Ltd. GIC models
defined.
We will need those number elsewhere very soon, so export them to a
shared header file, to avoid defining them again.
Change-Id: I1b8e2d93d6cea0d066866143c89eef736231134f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Neoverse-N2 erratum 2002655 is a Cat B erratum present in r0p0 of
the Neoverse-N2 processor core, and it is still open.
Neoverse-N2 SDEN: https://documentation-service.arm.com/static/61098b4e3d73a34b640e32c9?token=
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I1380418146807527abd97cdd4918265949ba5c01
There is no support for 2.5/3.125G SGMII. This 3.125G SerDes mode is not
SGMII. It is just plain 1000Base-X (as defined in IEEE 802.3z standard)
but upclocked 2.5x. This mode is commonly known under name 2500Base-X.
So remove incorrect SGMII keyword from names and comments and replace it
by more adequate 2500Base-X keyword.
There is no functional change in code, just renaming macros and updating
comments.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: If79aec16cc233f4896aafd75bfbbebb3f172a197
Introduced a build flag 'ENABLE_TRF_FOR_NS' to enable trace filter
control registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).
Change-Id: If3f53b8173a5573424b9a405a4bd8c206ffdeb8c
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Trap bits of trace filter control registers access are in
architecturally UNKNOWN state at boot hence
1. Initialized trap bits to one to prohibit trace filter control
registers accesses in lower ELs (EL2, EL1) in all security states
when FEAT_TRF is implemented.
2. These bits are RES0 when FEAT_TRF is not implemented and hence set
it to zero to aligns with the Arm ARM reference recommendation,
that mentions software must writes RES0 bits with all 0s.
Change-Id: I1b7abf2170ece84ee585c91cda32d22b25c0fc34
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Madhukar Pappireddy
Jayanth Dodderi Chidanand
Saurabh Gorecha
Olivier Deprez
Usama Arif
Yann Gautier
Lionel Debieve
Joanna Farley
Etienne Carriere
Bipin Ravi
Balint Dobszay
Pankaj Gupta
Varun Wadekar
Andre Przywara
nayanpatel-arm
Pali Rohár
Manish Pandey
Manish V Badarkhe