This resolves MISRA defects such as:
plat/common/plat_bl1_common.c:63:[MISRA C-2012 Rule 14.4 (required)]
The condition expression "1" does not have an essentially boolean type.
Change-Id: I679411980ad661191fbc834a44a5eca5494fd0e2
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
We relyed on the default signed-ness of constants, which is usually
signed. This can create MISRA violations, such as:
bl1/bl1_main.c:257:[MISRA C-2012 10.8 (required)] Cast of composite
expression off essential type signed to essential type unsigned
These constants were only used as unsigned, so this patch makes them
explicitly unsigned.
Change-Id: I5f1310c881e936077035fbb1d5ffb449b45de3ad
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
There was a collision between the name of the typedef in the CASSERT and
something else, so we make the name of the typedef unique to the
invocation of DEFFINE_SVC_UUID2 by appending the name that's passed into
the macro. This eliminates the following MISRA violation:
bl1/bl1_main.c:233:[MISRA C-2012 Rule 5.6 (required)] Identifier
"invalid_svc_uuid" is already used to represent a typedef.
This also resolves MISRA rule 5.9.
These renamings are as follows:
* tzram -> secram. This matches the function call name as it has
sec_mem in it's name
* fw_config_base -> config_base. This file does not mess with
hw_conig, so there's little chance of confusion
Change-Id: I8734ba0956140c8e29b89d0596d10d61a6ef351e
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
This patch adds RNG driver and use it to generate random number for stack
protection.
Change-Id: I73d79e68d08b5aa902dc7fad48e17a03f996178d
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Following f3ccf036ec the INFO print in amu_enable is causing
a lot of print outs on UART1 in DEBUG mode especially on PSCI test
cases because CPU_ON or SUSPEND operations call:
cm_prepare_el3_exit => enable_extensions_nonsecure => amu_enable.
PSCI SUSPEND is also very frequent in linux boot cases causing test
timeout failures.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I63581f8fa489d44b3b1d10af3b7f6fdf3af44720
For dualroot CoT there are two sets of SP certificates, one owned by
Silicon Provider(SiP) and other owned by Platform. Each certificate can
have a maximum of 4 SPs.
This patch reduces the number of SiP owned SPs from 8 to 4 and adds
the remaining 4 to Plat owned SP.
Plat owned SP certificate is signed using Platform RoT key and
protected against anti-rollback using the Non-trusted Non-volatile
counter.
Change-Id: Idc3ddd87d6d85a5506a7435f45a6ec17c4c50425
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Add support to generate a certificate named "plat-sp-cert" for Secure
Partitions(SP) owned by Platform.
Earlier a single certificate file "sip-sp-cert" was generated which
contained hash of all 8 SPs, with this change SPs are divided into
two categories viz "SiP owned" and "Plat owned" containing 4 SPs each.
Platform RoT key pair is used for signing.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I5bd493cfce4cf3fc14b87c8ed1045f633d0c92b6
This patch fixes the bug when AMUv1 group1 counters was
always assumed being implemented without checking for its
presence which was causing exception otherwise.
The AMU extension code was also modified as listed below:
- Added detection of AMUv1 for ARMv8.6
- 'PLAT_AMU_GROUP1_NR_COUNTERS' build option is removed and
number of group1 counters 'AMU_GROUP1_NR_COUNTERS' is now
calculated based on 'AMU_GROUP1_COUNTERS_MASK' value
- Added bit fields definitions and access functions for
AMCFGR_EL0/AMCFGR and AMCGCR_EL0/AMCGCR registers
- Unification of amu.c Aarch64 and Aarch32 source files
- Bug fixes and TF-A coding style compliant changes.
Change-Id: I14e407be62c3026ebc674ec7045e240ccb71e1fb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
BL31 binary size is aligned to 4KB because of the
code in include\plat\arm\common\arm_reclaim_init.ld.S:
__INIT_CODE_UNALIGNED__ = .;
. = ALIGN(PAGE_SIZE);
__INIT_CODE_END__ = .;
with all the zero data after the last instruction of
BL31 code to the end of the page.
This causes increase in size of BL31 binary stored in FIP
and its loading time by BL2.
This patch reduces the size of BL31 image by moving
page alignment from __INIT_CODE_END__ to __STACKS_END__
which also increases the stack size for secondary CPUs.
Change-Id: Ie2ec503fc774c22c12ec506d74fd3ef2b0b183a9
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Adding support for QTI CHIP SC7180 on ATF
Change-Id: I0d82d3a378036003fbd0bc4784f61464bb76ea82
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Co-authored-by: Maulik Shah <mkshah@codeaurora.org>
This patch adds support for additional Denver MIDRs to
cover all the current SKUs.
Change-Id: I85d0ffe9b3cb351f430ca7d7065a2609968a7a28
Signed-off-by: Alex Van Brunt <avanbrunt@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes the unused TZRAM setup function from the memory
controller driver.
Change-Id: Ic16f21fb84c47df71be6ab3e1e286640daa39291
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves the 'drivers' and the 'lib' folders out of the
'common' folder. This way the 'common' folder shall contain only
the platform support required for all Tegra platforms.
Change-Id: I2f238572d0a078d60c6b458a559538dc8a4d1856
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes the 'workaround_bpflush_runtime_exceptions' exception
vector table base address from the globals list as it gets used only by
the Denver CPU implementation.
Change-Id: I6ef94989f6dc4535d464493cc8621d32795ee1f6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
MISRA defect cleanup and general code cleanup in mem_region.c and
semihosting.c. This task also called for cleanup of the ARM NOR flash
driver but that was removed at some point since the Jira task was
created. This patch fixes all MISRA defects in these files except for a
few "Calling function "console_flush()" which returns error information
without testing the error information." errors which can't really be
avoided.
Defects Fixed
File Line Rule
lib/semihosting/semihosting.c 70 MISRA C-2012 Rule 14.4 (required)
lib/semihosting/semihosting.c 197 MISRA C-2012 Rule 14.3 (required)
lib/semihosting/semihosting.c 210 MISRA C-2012 Rule 14.4 (required)
lib/utils/mem_region.c 128 MISRA C-2012 Rule 12.1 (advisory)
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I21a039d1cfccd6aa4301da09daec15e373305a80
Add sdei support for i.MX8MM, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I5fd697fee22df151e13d0f1335e8ac8a7bae6189
If the user tries to change BUILD_BASE to put the build products outside
the build tree the compile will fail due to hard coded assumptions that
$BUILD_BASE is a relative path. Fix by using $(abspath $(BUILD_BASE))
to rationalize to an absolute path every time and remove the relative
path assumptions.
This patch also adds documentation that BUILD_BASE can be specified by
the user.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib1af874de658484aaffc672f30029b852d2489c8
These broken links were found with the help of this command:
$> sphinx-build -M linkcheck . build
A sample broken link is reported as follows:
(line 80) -local- firmware-design.rst#secure-el1-payloads-and-dispatchers
Change-Id: I5dcefdd4b8040908658115647e957f6c2c5da7c2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This patch fixes BL31 linker error
"relocation R_AARCH64_ABS32 against `a local symbol'
can not be used when making a shared object"
when Position Independent Executable (PIE) support
is enabled with ENABLE_PIE=1 build option.
Change-Id: I2692269676db3f3b27eed499fc029fffb67969be
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Currently only single signing domain is supported for SP packages but
there is plan to support dual signing domains if CoT is dualroot.
SP_CONTENT_CERT_ID is the certificate file which is currently generated
and signed with trusted world key which in-turn is derived from Silicon
provider RoT key.
To allow dual signing domain for SP packages, other certificate file
will be derived from Platform owned RoT key.
This patch renames "SP_CONTENT_CERT_ID" to "SIP_SP_CONTENT_CERT_ID" and
does other related changes.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I0bc445a3ab257e2dac03faa64f46e36a9fed5e93
Following merge of patchset [1] the spm_mm_boot_info_t structure is
included in few platform files unconditionally even when SPM_MM option
is disabled.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/2647
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I68bc034c9348b5d9bcfd2e5217b781df5ad1b369
The command line for BL33 payloads is typically taken from the DTB. On
"normal" systems the bootloader will put the right version in there, but
we typically don't use one on the FPGAs.
To avoid editing (and possibly re-packaging) the DTB for every change in
the command line, try to read it from some "magic" memory location
instead. It can be easily placed there by the tool that uploads the
other payloads to the FPGA's memory. BL31 will then replace the existing
command line in the DTB with that new string.
To avoid reading garbage, check the memory location for containing a
magic value. This is conveniently chosen to be a simple ASCII string, so
it can just preceed the actual command line in a text file:
--------------------------------
CMD:console=ttyAMA0,38400n8 debug loglevel=8
--------------------------------
Change-Id: I5923a80332c9fac3b4afd1a6aaa321233d0f60da
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Provide manifest and build options to boot OP-TEE as a
guest S-EL1 Secure Partition on top of Hafnium in S-EL2.
Increase ARM_SP_MAX_SIZE to cope with OP-TEE debug build image.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Idd2686fa689a78fe2d05ed92b1d23c65e2edd4cb
Openssl directory path is hardcoded to '/usr' in the makefile
of certificate generation and firmware encryption tool using
'OPENSSL_DIR' variable.
Hence changes are done to make 'OPENSSL_DIR' variable as
a build option so that user can provide openssl directory
path while building the certificate generation and firmware
encryption tool.
Also, updated the document for this newly created build option
Change-Id: Ib1538370d2c59263417f5db3746d1087ee1c1339
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Jimmy Brisson
Mark Dykes
joanna.farley
Saurabh Gorecha
Madhukar Pappireddy
Olivier Deprez
Manish Pandey
Julius Werner
Alexei Fedorov
Alex Van Brunt
Varun Wadekar
johpow01
Peng Fan
Sandrine Bailleux
Grant Likely
André Przywara
Nina Wu
Manish V Badarkhe