* changes:
Tegra194: mce: remove unused NVG functions
Tegra194: support for NVG interface v6.6
Tegra194: smmu: add PCIE0R1 mc reg to system suspend save list
Tegra194: enable driver for general purpose DMA engine
Tegra194: access XUSB_PADCTL registers on Si/FPGA platforms
Tegra194: organize the memory/mmio map to make it linear
Tegra194: memctrl: enable mc sid OVERRIDE for PCIE0R1
Tegra194: support for boot params wider than 32-bits
Tegra194: memctrl: set reorder depth limit for PCIE blocks
Tegra194: memctrl: program MC_TXN_OVERRIDE reg for PTCR, MPCORE and MIU
Tegra194: memctrl: set CGID_TAG_ADR instead of CGID_TAG_DEFAULT
Tegra194: memctrl: update mss reprogramming as HW PROD settings
Tegra194: memctrl: Disable PVARDC coalescer
Tegra194: memctrl: force seswr/rd transactions as passsthru & coherent
Tegra194: Request CG7 from last core in cluster
Tegra194: toggle SE clock during context save/restore
Tegra: bpmp: fix header file paths
* changes:
intel: Add function to check fpga readiness
intel: Add bridge control for FPGA reconfig
intel: FPGA config_isdone() status query
intel: System Manager refactoring
intel: Refactor reset manager driver
intel: Enable bridge access in Intel platform
intel: Modify non secure access function
PCIE0R1 security and override registers need to be preserved across
system suspend. Adding them to system suspend save register list.
Due to addition of above registers, increasing context save memory
by 2 bytes.
Change-Id: I1b3a56aee31f3c11e3edc2fb0a6da146eec1a30d
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
This patch enables the GPCDMA for all Tegra194 platforms to help
accelerate all the memory copy operations.
Change-Id: I8cbec99be6ebe4da74221245668b321ba9693479
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Many simulation/emulation platforms do not support this hardware block
leading to SErrors during register accesses.
This patch conditionally accesses the registers from this block only
on actual Si and FPGA platforms.
Change-Id: Ic22817a8c9f81978ba88c5362bfd734a0040d35d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch organizes the platform memory/mmio map, so that the base
addresses for the apertures line up in ascending order. This makes
it easier for the xlat_tables_v2 library to create mappings for each
mmap_add_region call.
Change-Id: Ie1938ba043820625c9fea904009a3d2ccd29f7b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
PCIE0R1 does not program stream IDs, so allow the stream ID to be
overriden by the MC.
Change-Id: I4dbd71e1ce24b11e646de421ef68c762818c2667
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
The previous bootloader is not able to pass boot params wider than
32-bits due to an oversight in the scratch register being used. A
new secure scratch register #75 has been assigned to pass the higher
bits.
This patch adds support to parse the higher bits from scratch #75
and use them in calculating the base address for the location of
the boot params.
Scratch #75 format
====================
31:16 - bl31_plat_params high address
15:0 - bl31_params high address
Change-Id: Id53c45f70a9cb370c776ed7c82ad3f2258576a80
Signed-off-by: Steven Kao <skao@nvidia.com>
HW bug in third party PCIE IP - PCIE datapath hangs when there are
more than 28 outstanding requests on data backbone for x1 controller.
Suggested SW WAR is to limit reorder_depth_limit to 16 for
PCIE 1W/2AW/3W clients.
Change-Id: Id5448251c35d2a93f66a8b5835ae4044f5cef067
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
-PTCR is ISO client so setting it to FORCE_NON_COHERENT.
-MPCORER, MPCOREW and MIU0R/W to MIU7R/W clients itself will provide
ordering so no need to override from mc.
-MIU0R/W to MIU7R/W clients registers are not implemented in tegrasim
so skipping it for simulation.
-All the clients need to set CGID_TAG_ADR to maintain request ordering
within a 4K boundary.
Change-Id: Iaa3189a1f3e40fb4cef28be36bc4baeb5ac8f9ca
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
- All SoC clients should use CGID_TAG_ADR to improve perf
- Remove tegra194_txn_override_cfgs array that is not getting used.
Change-Id: I9130ef5ae8659ed5f9d843ab9a0ecf58b5ce9c74
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Memory clients are divided in to ISO/NonISO/Order/Unordered/Low
BW/High BW. Based on the client types, HW team recommends, different
memory ordering settings, IO coherency settings and SMMU register settings
for optimized performance of the MC clients.
For example ordered ISO clients should be set as strongly ordered and
should bypass SCF and directly access MC hence set as
FORCE_NON_COHERENT. Like this there are multiple recommendations
for all of the MC clients.
This change sets all these MC registers as per HW spec file.
Change-Id: I8a8a0887cd86bf6fe8ac7835df6c888855738cd9
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Due to a hardware bug PVA may perform memory transactions which
cause coalescer faults. This change works around the issue by
disabling coalescer for PVA0RDC and PVA1RDC.
Change-Id: I27d1f6e7bc819fb303dae98079d9277fa346a1d3
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Force memory transactions from seswr and sesrd as coherent_snoop from
no-override. This is necessary as niso clients should use coherent
path.
Presently its set as FORCE_COHERENT_SNOOP. Once SE+TZ is enabled
with SMMU, this needs to be replaced by FORCE_COHERENT.
Change-Id: I8b50722de743b9028129b4715769ef93deab73b5
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
- SC7 requires all the cluster groups to be in CG7 state, else
is_sc7_allowed will get denied
- As a WAR while requesting CC6, request CG7 as well
- CG7 request will not be honored if it is not last core in Cluster
group
- This is just to satisfy MCE for now as CG7 is going to be defeatured
Change-Id: Ibf2f8a365a2e46bd427abd563da772b6b618350f
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
This patch adds support to toggle SE clock, using the bpmp_ipc
interface, to enable SE context save/restore. The SE sequence mostly
gets called during System Suspend/Resume.
Change-Id: I9cee12a9e14861d5e3c8c4f18b4d7f898b6ebfa7
Signed-off-by: steven kao <skao@nvidia.com>
This patch fixes the header file paths to include debug.h
from the right location.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: If303792d2169158f436ae6aa5b6d7a4f88e28f7b
Parse the parameter structure the PLM populates, to populate the
bl32 and bl33 image structures.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I317072d1086f6cc6f90883c1b8b6d086ff57b443
ATF handover can be used by Xilinx platforms, so move it to common
file from platform specific files.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5f0839351f534619de581d1953c8427a079487e0
Even though ERET always causes a jump to another address, aarch64 CPUs
speculatively execute following instructions as if the ERET
instruction was not a jump instruction.
The speculative execution does not cross privilege-levels (to the jump
target as one would expect), but it continues on the kernel privilege
level as if the ERET instruction did not change the control flow -
thus execution anything that is accidentally linked after the ERET
instruction. Later, the results of this speculative execution are
always architecturally discarded, however they can leak data using
microarchitectural side channels. This speculative execution is very
reliable (seems to be unconditional) and it manages to complete even
relatively performance-heavy operations (e.g. multiple dependent
fetches from uncached memory).
This was fixed in Linux, FreeBSD, OpenBSD and Optee OS:
679db7080129fb48ace43a08873eceabfd092aa1
It is demonstrated in a SafeSide example:
https://github.com/google/safeside/blob/master/demos/eret_hvc_smc_wrapper.cchttps://github.com/google/safeside/blob/master/kernel_modules/kmod_eret_hvc_smc/eret_hvc_smc_module.c
Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Change-Id: Iead39b0b9fb4b8d8b5609daaa8be81497ba63a0f
* changes:
plat: xilinx: Move pm_client.h to common directory
plat: xilinx: versal: Make silicon default build target
xilinx: versal: Wire silicon default setup
versal: Increase OCM memory size for DEBUG builds
plat: xilinx: versal: Dont set IOU switch clock
arm64: versal: Adjust cpu clock for versal virtual
xilinx: versal: Add support for PM_GET_OPERATING_CHARACTERISTIC EEMI call
plat: versal: Add Get_ChipID API
plat: xilinx: versal: Add load Pdi API support
xilinx: versal: Add feature check API
xilinx: versal: Implement set wakeup source for client
plat: xilinx: versal: Add GET_CALLBACK_DATA function
xilinx: versal: Add PSCI APIs for system shutdown & reset
xilinx: versal: Add PSCI APIs for suspend/resume
xilinx: versal: Remove no_pmc ops to ON power domain
xilinx: versal: Add set wakeup source API
xilinx: versal: Add client wakeup API
xilinx: versal: Add query data API
xilinx: versal: Add request wakeup API
xilinx: versal: Add PM_INIT_FINALIZE API for versal
xilinx: versal: Add support of PM_GET_TRUSTZONE_VERSION API
xilinx: versal: enable ipi mailbox service
xilinx: move ipi mailbox svc to xilinx common
plat: xilinx: versal: Implement PM IOCTL API
xilinx: versal: Implement power down/restart related EEMI API
xilinx: versal: Add SMC handler for EEMI API
xilinx: versal: Implement PLL related PM APIs
xilinx: versal: Implement clock related PM APIs
xilinx: versal: Implement pin control related PM APIs
xilinx: versal: Implement reset related PM APIs
xilinx: versal: Implement device related PM APIs
xilinx: versal: Add support for suspend related APIs
xilinx: versal: Add get_api_version support
xilinx: Add support to send PM API to PMC using IPI for versal
plat: xilinx: versal: Move versal_def.h to include directory
plat: xilinx: versal: Move versal_private.h to include directory
plat: xilinx: zynqmp: Use GIC framework for warm restart
In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
the build to require that ARM_BL31_IN_DRAM is enabled as well.
Naturally with SEPARATE_NOBITS_REGION enabled, the BL31 initialization code
cannot be reclaimed to be used for runtime data such as secondary cpu stacks.
Memory map for BL31 NOBITS region also has to be created.
Change-Id: Ibd480f82c1dc74e9cbb54eec07d7a8fecbf25433
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
* changes:
Tegra194: platform handler for entering CPU standby state
Tegra194: memctrl: force viw and vifalr/w transactions as non-coherent
Tegra194: memctrl: fix bug in client order id reg value generation
Tegra194: memctrl: enable mc coalescer
Tegra194: update scratch registers used to read boot parameters
Tegra194: implement system shutdown/reset handlers
Tegra194: mce: support for shutdown and reboot
Tegra194: request CG7 before checking if SC7 is allowed
Tegra194: config to enable/disable strict checking mode
Tegra194: remove unused platform configs
Tegra194: restore XUSB stream IDs on System Resume
Remove the general BL31 mmap region: it duplicates the existing static
mapping for the entire SRAM region. Use the helper definitions when
applicable to simplify the code and add the MT_EXECUTE_NEVER flag.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I7a6b79e50e4b5c698774229530dd3d2a89e94a6d
STM32MP1 platform is able to boot from SPI-NOR devices.
These modifications add this support using the new
SPI-NOR framework.
Change-Id: I75ff9eba4661f9fb87ce24ced2bacbf8558ebe44
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
STM32MP1 platform is able to boot from SPI-NAND devices.
These modifications add this support using the new
SPI-NAND framework.
Change-Id: I0d5448bdc4bde153c1209e8043846c0f935ae5ba
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Deepika Bhavnani
Soby Mathew
Manish Pandey
Alexei Fedorov
Varun Wadekar
Pritesh Raithatha
Steven Kao
Puneet Saxena
Arto Merilainen
Vignesh Radhakrishnan
Mark Dykes
Venkatesh Yadav Abbarapu
Anthony Steinhauser
Norbert Werner
Madhukar Pappireddy
Sandrine Bailleux
Samuel Holland
Lionel Debieve