* changes:
mmc: stm32_sdmmc2: correctly manage block size
mmc: stm32_sdmmc2: manage max-frequency property from DT
stm32mp1: move check_header() to common code
stm32mp1: keep console during runtime
stm32mp1: sp_min: initialize MMU and cache earlier
stm32mp1: add support for LpDDR3
stm32mp1: use a common function to check spinlock is available
clk: stm32mp: enable RTCAPB clock for dual-core chips
stm32mp1: check if the SoC is single core
stm32mp1: print information about board
stm32mp1: print information about SoC
stm32mp1: add watchdog support
This console driver sends '\r' before 'n', not after.
It works, but the convention is "\r\n" (i.e. CRLF)
Instead of fixing it in the driver, set CONSOLE_FLAG_TRANSLATE_CRLF
to leave it to the framework.
Change-Id: I2154e29313739a40dff70cfb5c0f8989136d4ad2
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This function can be used on several stm32mp devices, it is then moved in
plat/st/common/stm32mp_common.c.
Change-Id: I862debe39604410f71a9ddc28713026362e9ecda
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The runtime console is only kept in DEBUG configuration.
Change-Id: I0447dfcacb9a63a12bcdab7c55584d70c3220e5b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This change enhances performance and security in BL32 stage.
Change-Id: I64df5995fc6b04f6cf42d6a00a6d3d0f602b5407
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To use spinlocks, MMU should be enabled, as well as data cache.
A common function is created (moved from clock file).
It is then used whenever a spinlock has to be taken, in BSEC and clock
drivers.
Change-Id: I94baed0114a2061ad71bd5287a91bf7f1c6821f6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Among the variants of STM32MP, the STM32MP151 is a single Cortex-A7 chip.
A function is added to check the part number of the SoC.
If it corresponds to STM32MP151A or STM32MP151C, then the chip has a single
Cortex-A7.
Change-Id: Icac2015c5d03ce0bcb8e99bbaf1ec8ada34be49c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
On STMicroelectronics boards, the board information is stored in OTP.
This OTP is described in device tree, in BSEC board_id node.
Change-Id: Ieccbdcb048343680faac8dc577b75c67ac106f5b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
This information is located in DBGMCU registers.
Change-Id: I480aa046fed9992e3d9665b1f0520bc4b6cfdf30
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Introduce driver for STM32 IWDG peripheral (Independent Watchdog).
It is configured according to device tree content and should be enabled
from there.
The watchdog is not started by default. It can be started after an HW
reset if the dedicated OTP is fused.
The watchdog also needs to be frozen if a debugger is attached.
This is done by configuring the correct bits in DBGMCU.
This configuration is allowed by checking BSEC properties.
An increase of BL2 size is also required when adding this new code.
Change-Id: Ide7535d717885ce2f9c387cf17afd8b5607f3e7f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
This patch adds support for Corstone-700 foundation IP, which integrates
both Cortex-M0+ and Cortex-A(Host) processors in one handy, flexible
subsystem.
This is an example implementation of Corstone-700 IP host firmware.
Cortex-M0+ will take care of boot stages 1 and 2(BL1/BL2) as well as
bringing Host out RESET. Host will start execution directly from BL32 and
then will jump to Linux.
It is an initial port and additional features are expected to be added
later.
Change-Id: I7b5c0278243d574284b777b2408375d007a7736e
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Driver will calculate DDR size instead of using hardcoded value
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I642cf2180929965ef12bd5ae4393b2f3d0dcddde
Currently, console drivers prepend '\r' to '\n' by themselves. This is
common enough to be supported in the framework.
Add a new flag, CONSOLE_FLAG_TRANSLATE_CRLF. A driver can set this
flag to ask the framework to transform LF into CRLF instead of doing
it by itself.
Change-Id: I4f5c5887591bc0a8749a105abe62b6562eaf503b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
To provide glitchless clock to downstream logic even if clock toggles
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I728d64d0ba3b4492125bea5b0737fc83180356f1
SMMUv3 driver functions which are called from BL1 and BL31
currently use counter-based poll method for testing status
bits. Adding Delay Timer driver to BL1 and BL31 is required
for timeout-based implementation using timer delay functions
for SMMU and other drivers.
This patch adds new function `fvp_timer_init()` which
initialises either System level generic or SP804 timer based on
FVP_USE_SP804_TIMER build flag.
In BL2U `bl2u_early_platform_setup()` function the call to
`arm_bl2u_early_platform_setup()` (which calls
`generic_delay_timer_init()` ignoring FVP_USE_SP804_TIMER flag),
is replaced with `arm_console_boot_init()` and `fvp_timer_init()`.
Change-Id: Ifd8dcebf4019e877b9bc5641551deef77a44c0d1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Rename RCAR_PRODUCT_* to PRR_PRODUCT_* and drop the duplicate
RCAR_PRODUCT_* macro.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I6b2789790b85edb79c026f0860d70f323d113d96
Pull out the PRR_* macros into rcar_def.h and remove multiple copies of
it. Now that there are still RCAR_* macros in rcar_def.h too and they
have the exact same meaning as the PRR_* macros, but that's for another
patch.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Icb7f61b971b1a23102bd1b9f58cda580660a55fc
This patch updates all Tegra platforms to use the new multi console API.
Change-Id: I27c0c7830a86e26491dea9991a689f0b01e4dbf0
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Julius Werner <jwerner@chromium.org>
* changes:
rockchip: rk3399: store actual debug uart information on suspend
rockchip: move dt-coreboot uart distinction into param handling code
rockchip: make uart baudrate configurable
rockchip: px30: add uart5 as option for serial output
Extract clock information for UART, MMC & Watchdog from the clock manager
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I42d3d4ceeaf45788d457472f6ddcd3fe099f0133
Add the disable_auth dynamic parameter, that allows to disable the
authentication when TBBR is enabled. This parameter is for development
only.
Change-Id: Ic24ad16738517f7e07c4f506dcf69a1ae8df7d2d
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Extract clock information for UART, MMC & Watchdog from the platform
rather than hard code it
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2582bd34a6da97bd75d5ccba5f93840e65f26b03
The rk3399 suspend code saves and restores the debug uart settings, but
right now always does this for the default uart. Right now this works
only by chance for the majority of rk3399 boards, which do not deviate
from that default.
But both Coreboot as well as U-Boot-based platforms can actually use
different uarts for their output, which can be configured from either
devicetree or Coreboot-variables.
To fix this, just use the stored uart-base information instead of the
default constant.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I1ea059d59a1126f6f8702315df7e620e632b686e
Rockchip platforms can be booted from either u-boot or coreboot.
So far the Coreboot-console was initizalized from a coreboot data struct
in the early_param2 callbacks and dt-based consoles with data from the
rockchip_get_uart_* functions.
But later code may also need this console information for example for
special suspend handling. To make this easy follow a suggestion from
Julius Werner and move the coreboot<->dt distinction into the
rockchip_get_uart_* functions, thus making correct data about the used
uart available to all Rockchip platform code at all times.
This includes a new rockchip_get_uart_clock as well, because while the
dt-platforms right now always just default the rate defined in a constant
Coreboot provides its own field for the clock rate and we don't want to
loose that information for the console init. Similarly the rk_uart_*
variables should move into the non-Coreboot code, to prevent them from
being marked as unused, which also requires the rk_get_uart_* functions
to move below the actual dt-parsing.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I278d595d2aa6c6864187fc8979a9fbff9814feac
Pull out common code from aarch64 and include
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I4d0f5e1bb01bcdacbedf8e6c359de594239b645f
A previous patch already allowed to configure the uart output from the
devicetree, but on Rockchip platforms we also have the issue of different
vendors using different baudrates for their uarts.
For example, rk3399 has a default baudrate of 115200 which is true for
ChromeOS-devices and boards from Theobroma-Systems, while all the boards
using the vendor boot chain actually use a baudrate of 1500000.
Similarly the newly added px30 has a default of said 1500000 but some
boards may want to use the more widely used 115200.
The devicetree stdout-path node already contains the desired baudrate,
so add simple code to parse it from there and override the default,
which stays unchanged.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I7412139c3df3073a1996eb508ec08642ec6af90d
The px30 mini-evb can use either uart2 (muxed with the sd-card pins) or
uart5 via its pin header for serial output. Uart5 is especially useful
when needing to boot from the sd-card, where uart2 obviously is not
useable.
So add the uart5 constants and it as uart option for the serial-param
handler.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: Ib88df7a55d761ee104d312c9953a13de3beba1c4
The CPU[1-3] are reset to initial/cold boot state (with their reset
address set to 0x0). In this state the cpus are waiting for another
one to set the reset address to bl31_warm_entrypoint and wake them up.
The CPU0 needs a bit of a workaround as changing the reset address
either through PSCI mailbox or the mmio mapped RVBAR (at 0xda834650)
does not seem to have any effect. Thus the workaround consists in
emulating the other CPUs' behavior with a WFE loop and manually jumping
to bl31_warm_entrypoint when woken back up by another one.
Change-Id: I11265620b5fd0619285e3993253a3f9a3ff6a7a4
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Before CPU enters standby state (wfi), the AP needs to signal the SCP
through PSCI mailbox.
Also at boot time the AP has to wait for the SCP to be ready before
sending the first scpi commands or it can crash.
Change-Id: Iacc99f5bec745ad71922c5ea07ca5b87088133b6
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
NOTE: AARCH32/AARCH64 macros are now deprecated in favor of __aarch64__.
All common C compilers pre-define the same macros to signal which
architecture the code is being compiled for: __arm__ for AArch32 (or
earlier versions) and __aarch64__ for AArch64. There's no need for TF-A
to define its own custom macros for this. In order to unify code with
the export headers (which use __aarch64__ to avoid another dependency),
let's deprecate the AARCH32 and AARCH64 macros and switch the code base
over to the pre-defined standard macro. (Since it is somewhat
unintuitive that __arm__ only means AArch32, let's standardize on only
using __aarch64__.)
Change-Id: Ic77de4b052297d77f38fc95f95f65a8ee70cf200
Signed-off-by: Julius Werner <jwerner@chromium.org>