* changes:
test(el3-runtime): dit is retained on world switch
fix(el3-runtime): set unset pstate bits to default
refactor(el3-runtime): add prepare_el3_entry func
Add the SZ_* macros from 32 to 2G.
This allows removing some defines in raw NAND driver
and STM32MP1 boot device selection code.
Change-Id: I3c4d4959b0f43e785eeb37a43d03b2906b7fcfbc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Older Qualcomm SoCs seem to have a custom Qualcomm implementation of
the GICv2 specification. It's mostly compliant but unfortunately it
looks like a mistake was made with the GICD_PIDR registers. PIDR2 is
defined to be at offset 0xFE8, but the Qualcomm implementation has it
at 0xFD8.
It looks like the entire PIDR0-3/4-7 block is swapped compared to the
ARM implementation: PIDR0 starts at 0xFD0 (instead of 0xFE0)
and PIDR4 starts at 0xFE0 (instead of 0xFD0).
Actually this only breaks a single assert in gicv2_main.c that checks
the GIC version: assert((gic_version == ARCH_REV_GICV2) ...
In release mode everything seems to work correctly.
To keep the code generic, allow affected platforms to override the
GICD_PIDR2_GICV2 register address in platform_def.h. Since this header
is typically included very early (e.g. from assert.h), add an #ifndef
so the definitions from platform_def.h takes priority.
Change-Id: I2929a8c1726f8d751bc28796567eb30b81eca2fe
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Add tsp service to check the value of the PSTATE DIT bit is as
expected and toggle it's value. This is used to ensure that
the DIT bit is maintained during a switch from the Normal to
Secure worlds and back.
Change-Id: I4e8bdfa6530e5e75925c0079d4fa2795133c5105
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
During a transition to a higher EL some of the PSTATE bits are not set
by hardware, this means that their state may be leaked from lower ELs.
This patch sets those bits to a default value upon entry to EL3.
This patch was tested using a debugger to check the PSTATE values
are correctly set. As well as adding a test in the next patch to
ensure the PSTATE in lower ELs is still maintained after this change.
Change-Id: Ie546acbca7b9aa3c86bd68185edded91b2a64ae5
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
From the new binding, the RCC become secured based on the new
compatible. This must be done only from the secure OS initialisation.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I7f0a62f22bfcca638ddaefc9563df00f89f01653
Allow to set a gpio in output mode from the device tree.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: Ic483324bc5fe916a60df05f74706bd1da4d08aa5
No functional, change, but some improvements:
- Declare set_gpio() as static (only called locally)
- Handle the type ('open-drain') property independently from the
mode one.
- Replace mmio_clrbits_32() + mmio_setbits_32() with
mmio_clrsetbits_32().
- Add a missing log
- Add missing U() in macro definitions
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: I1a79609609ac8e8001127ebefdb81def573f76fa
Rename driver file to BSEC2.
Split header file in IP and feature parts.
Add functions to access BSEC scratch register.
Several corrections and improvements.
Probe the driver earlier, especially to check debug features.
Change-Id: I1981536398d598d67a19d2d7766dacc18de72ec1
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This patch adds the basic CPU library code to support the Poseidon CPU
in TF-A. Poseidon is derived from HunterELP core, an implementation of
v9.2 architecture. Currently, Hunter CPU the predecessor to HunterELP,
is supported in TF-A. Accordingly the Hunter CPU library code has been
as the base and adapted here.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I406b4de156a67132e6a5523370115aaac933f18d
Rework the internal functions __stm32mp1_clk_enable/disable to check for
reference count instead of secure status for a clock.
Some functions now unused can be removed.
Change-Id: Ie4359110d7144229f85c961dcd5a019222c3fd25
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add a platform hook for returning the boot index, i.e. the bank from
which the platform has booted the updatable firmware images. This
value will be passed to the Update Agent.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Ic7bef21071c48cfc7b69c50e89df9ff758d95b00
Add a helper function to pass the metadata structure to the
platforms. Platforms can then read the metadata structure and pass the
boot index value, i.e. the bank(partition) from which the firmware
images were booted, to the Update Agent.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I571179b9baa0fbc4d0f08d7a6e3b50c0c7165c5c
With the GPT partition scheme, a partition can be identified using
it's UniquePartitionGUID, instead of it's name. Add a function to
identify the partition based on this GUID value. This functionality is
useful in identification of a partition whose UniquePartitionGUID
value is known.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I543f794e1f7773f969968a6bce85ecca6f6a1659
The FWU multi bank feature supports multiple partitions or banks of
firmware components, where a platform can support having an active and
a backup partition(bank) of firmware images to boot from. This feature
identifies the images in a given bank using image GUID's --
this GUID value corresponds to the UniquePartitionGUID value used to
uniquely identify a GPT partition.
To support identification of images, add a member to the
partition_entry structure to store the UniquePartitionGUID value of
the GPT partition entry. This value is subsequently used to select the
firmware image to boot in a multi partition setup.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I2d235467ce7a7f20ebc1cef4db09924a5282e714
The EFI_NAMELEN macro has been moved to efi.h header. Get the macro
from efi.h. Use the struct efi_guid structure for declaring GUID
members in gpt.h
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I1c3a2605b9f857b9cf2dcfdaed4dc9d0a2cbf0f0
The FWU metadata structure uses GUID's to identify the updatable
firmware images. Add some basic helper functions and
macros that would be used for working with the GUID datatype.
With the FWU feature enabled, these would then be used for image
identification and booting of images from a particular
bank(partition).
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Ia54c0402d72b503d6abd1d94bc751cc14602cd39
The metadata structure copy is passed to the platform routine to set
the image source to boot the platform from. This is done by reading
the metadata structure. Pass the metadata as a read-only copy to the
routine -- the routine only needs to consume the metadata values and
should not be able to update the metadata fields.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I399cad99ab89c71483e5a32a1de0e22df304f8b0
Added offset for register DEVDISR2 and DEVDISR3, added
bit definiton for PORSR1_RCW, and some macro for SVR.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ie49392b89280c6c2c3510fcb4c85d827a1efdac0
Instead of transmitting an 'enum stm32mp_osc_id', just send
directly the clock name with a 'const char *'
Change-Id: I866b05cbb1685a9b9f80e63dcd5ba7b1d35fc932
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Add L1PCTL field definiton in register CPUACTLR_EL1.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Iebfb240ac58aa8f3dc870804bf4390dfbdfa9b95
Measured-Boot and Trusted-Boot are orthogonal to each other and hence
removed dependency of Trusted-Boot on Measured-Boot by making below
changes -
1. BL1 and BL2 main functions are used for initializing Crypto module
instead of the authentication module
2. Updated Crypto module registration macro for MEASURED_BOOT with only
necessary callbacks for calculating image hashes
3. The 'load_auth_image' function is now used for the image measurement
during Trusted or Non-Trusted Boot flow
Change-Id: I3570e80bae8ce8f5b58d84bd955aa43e925d9fff
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
These basic tests are generic and should be used independently of the
driver, depending on the plaftorm characteristics.
Change-Id: I38161b659ef2a23fd30a56e1c9b1bd98461a2fe4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
stm32mp_ddrctl structure contains DDRCTRL registers definitions.
stm32mp_ddr_info contains general DDR information extracted from DT.
stm32mp_ddr_size moves to the generic side.
stm32mp1_ddr_priv contains platform private data.
stm32mp_ddr_dt_get_info() and stm32mp_ddr_dt_get_param() allow to
retrieve data from DT. They are located in new generic c/h files in
which stm32mp_ddr_param structure is declared. Platform makefile
is updated.
Adapt driver with this new classification.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I4187376c9fff1a30e7a94407d188391547107997
A new flag STM32MP_DDR_DUAL_AXI_PORT is added, and enabled by default.
It will allow choosing single or dual AXI ports for DDR.
Change-Id: I48826a66a6f4d18df87e081c0960af89ddda1b9d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the read data eye training = training for optimal read valid placement
(RVTRN) when the built-in calibration is executed for LPDDR2 and LPDDR3.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I7ac1c77c21ebc30315b532741f2f255c2312d5b2
The support of a predefined DDR PHY tuning result is removed for
STM32MP1 driver because it is not needed at the supported frequency
when built-in calibration is executed.
The calibration parameters were provided in the device tree by the
optional node "st,phy-cal", activated in ddr helper file by the
compilation flag DDR_PHY_CAL_SKIP and filled with values generated
by CubeMX.
This patch
- updates the binding file to remove "st,phy-cal" support
- updates the device trees and remove the associated defines
- simplifies the STM32MP1 DDR driver and remove the support of
the optional "st,phy-cal"
After this patch the built-in calibration is always executed.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I3fc445520c259f7f05730aefc25e64b328bf7159
Refactor the GPIO code to use a small lookup table instead of redundant or
repetitive code.
Signed-off-by: Jona Stubbe <tf-a@jona-stubbe.de>
Change-Id: Icf60385095efc1f506e4215d497b60f90e16edfd
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
For somewhat historical reasons we are doing some initial PMIC regulator
setup in BL31, as U-Boot does not (yet) have a PMIC driver. This worked
fine so far, but there is at least one board (OrangePi 3) that gets upset,
because the Ethernet PHY needs some *coordinated* bringup of *two*
regulators.
To avoid custom hacks, let's introduce a build option to keep doing the
regulator setup in TF-A. Defining SUNXI_SETUP_REGULATORS to 0 will break
support for some devices on some boards in U-Boot (Ethernet and HDMI),
but will allow to bring up the OrangePi 3 in Linux correctly. We keep
the default at 1 to not change the behaviour for all other boards.
After U-Boot gained proper PMIC support at some point in the future, we
will probably change the default to 0, to get rid of the less optimal
PMIC code in TF-A.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ie8e2583d0396f6eeaae8ffe6b6190f27db63e2a7
To correctly initialize the MMC devices, a power cycle is required.
For this we need to:
- disable vmmc-supply regulator
- make the power cycle required for SDMMC2 peripheral
- enable regulators
Change-Id: I2be6d9082d1cc4c864a82cf2c31ff8522e2d31a2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Fixed regulator is mainly used when no pmic is available
Change-Id: Ib6a998684bcb055ba95a093bee563372d9051474
Signed-off-by: Pascal Paillet <p.paillet@st.com>
print_pmic_info_and_debug() prints the PMIC version ID and displays
regulator information if debug is enabled.
It is under DEBUG flag and called after initialize_pmic() in BL2.
Change-Id: Ib81a625740b7ec6abb49cfca05e44c69efaa4718
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Add a regulator framework to:
- provide an interface to consumers and drivers,
- connect consumers with drivers,
- handle most of devicetree-parsing,
- handle always-on and boot-on regulators,
- handle min/max voltages,
Change-Id: I23c939fdef2c71a416c44c9de332f70db0d2aa53
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Federico Recanati
Madhukar Pappireddy
Manish Pandey
Yann Gautier
Stephan Gerhold
Daniel Boulby
Lionel Debieve
Fabien Dessenne
Nicolas Le Bayon
Jayanth Dodderi Chidanand
Sughosh Ganu
Sandrine Bailleux
Jiafei Pan
Gabriel Fernandez
Manish V Badarkhe
Nicolas Le Bayon
Patrick Delaunay
Jona Stubbe
André Przywara
Joanna Farley
Pascal Paillet
Yann Gautier