Changing the log message from notice to verbose, to save some space
and that leads to successfull compilation.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Iee5a808febf211464eb8ba6f0377f79378333f5d
* changes:
feat(intel): add SMC support for HWMON voltage and temp sensor
feat(intel): add SMC support for Get USERCODE
fix(intel): extend SDM command to return the SDM firmware version
feat(intel): add SMC for enquiring firmware version
fix(intel): configuration status based on start request
fix(intel): bit-wise configuration flag handling
fix(intel): get config status OK status
fix(intel): use macro as return value
fix(intel): fix fpga config write return mechanism
feat(intel): add SiP service for DCMF status
feat(intel): add RSU 'Max Retry' SiP SMC services
feat(intel): enable SMC SoC FPGA bridges enable/disable
feat(intel): add SMC/PSCI services for DCMF version support
feat(intel): allow to access all register addresses if DEBUG=1
fix(intel): modify how configuration type is handled
feat(intel): support SiP SVC version
feat(intel): enable firewall for OCRAM in BL31
feat(intel): create source file for firewall configuration
fix(intel): refactor NOC header
This change performs a basic configuration of the SMMU root registers
interface on an RME enabled system. This permits enabling GPC checks
for transactions originated from a non-secure or secure device upstream
to an SMMU. It re-uses the boot time GPT base address and configuration
programmed on the PE.
The root register file offset is platform dependent and has to be
supplied on a model command line.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I4f889be6b7afc2afb4d1d147c5c1c3ea68f32e07
Add support to read temperature and voltage using SMC command
Signed-off-by: Kris Chaplin <kris.chaplin@linux.intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I806611610043906b720b5096728a5deb5d652b1d
This patch adds SMC support for enquiring FPGA's User Code.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I82c1fa9390b6f7509b2284d51e199fb8b6a9b1ad
Updates intel_smc_fw_version function to read SDM
firmware version in major/minor ACDS release number.
Update CONFIG_STATUS Response Data [1] bit0-23.
Return INTEL_SIP_SMC_STATUS_ERROR if unexpected
firmware version is being retrieved.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I018ccbb961786a75dc6eb873b0f232e71341e1d2
This command allows non-secure world software to enquire the
version of currently running Secure Device Manager (SDM) firmware.
This will be useful in maintaining backward-compatibility as well
as ensuring software cross-compabitility.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ibc23734d1135db74423da5e29655f9d32472a3b0
Configuration status command now returns the result based on the last
config start command made to the runtime software. The status type can
be either:
- NO_REQUEST (default)
- RECONFIGURATION
- BITSTREAM_AUTH
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I97406abe09b49b9d9a5b43e62fe09eb23c729bff
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change configuration type handling to bit-wise flag. This is to align
with Linux's FPGA Manager definitions and promotes better compatibility.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I5aaf91d3fec538fe3f4fe8395d9adb47ec969434
Config status have different OK requirement between MBOX_CONFIG_STATUS
and MBOX_RECONFIG_STATUS request. This patch adds the checking to
differentiate between both command.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I45a4c3de460b031757dbcbd0b3a8055cb0a55aff
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
SMC function should strictly return INTEL_SIP_SMC_STATUS macro. Directly
returning value of variable status might cause confusion in calling
software.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Iea17f4feaa5c917e8b995471f3019dba6ea8dcd3
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
This revert commit 279c8015fefcb544eb311b9052f417fc02ab84aa.
The previous change breaks this feature compatibility with Linux driver.
Hence, the fix for the earlier issue is going to be fixed in uboot instead.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I93220243bad65ed53322050d990544c7df4ce66b
This patch adds 2 additional RSU SiP services for Intel SoCFPGA
platforms:
- INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS stores current DCMF status in
BL31
- INTEL_SIP_SMC_RSU_DCMF_STATUS is calling function for non-secure
software to retrieve stored DCMF status
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ic7a3e6988c71ad4bf66c58a1d669956524dfdf11
Enable SoC FPGA bridges enable/disable from non-secure world
through secure monitor calls
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I4474abab9731923a61ff0e7eb2c2fa32048001cb
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Support get/store RSU DCMF version:
INTEL_SIP_SMC_RSU_DCMF_VERSION - Get current DCMF version
INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION - Store current DCMF version
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I85ffbc0efc859736899d4812f040fd7be17c8d8d
Allow to access all register addresses from SMC call if compile the code
with DEBUG=1 for debugging purpose.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Idd31827fb71307efbdbcceeaa05f6cb072842e10
This patch creates macros to handle different configuration
types. These changes will help in adding new configuration
types in the future.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I5826a8e5942228a9ed376212f0df43b1605c0199
This command supports to return SiP SVC major and minor version.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Ia8bf678b8de0278aeaae748f24bdd05f8c9f9b47
Set OCRAM as secure region and required privileged access in BL31 to
prevent software running in normal world (non-secure) accessing memory
region in OCRAM which may contain sensitive information (e.g. FSBL,
handoff data)
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib6b24efd69f49cd3f9aa4ef2ea9f1af5ce582bd6
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Move codes that previously were part of system_manager driver into
firewall driver which are more appropriate based on their functionalities.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I35e9d792f35ee7491c2f306781417a0c8faae3fd
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Refactor NOC header to be shareable across both Stratix 10 and Agilex
platforms. This patch also removes redundant NOC declarations in system
manager header file.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I6348b67a8b54c2ad19327d6b8c25ae37d25e4b4a
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
In order to modularize software libraries and platform drivers,
we create makefile helpers to treat a folder as a basic compile
unit.
Each module has a build rule (rules.mk) to describe driver and software
library source codes to be built in.
Signed-off-by: Leon Chen <leon.chen@mediatek.com>
Change-Id: Ib2113b259dc97937b7295b265509025b43b14077
Not all K3 platforms support low power mode, so to allow these
features to be included for platforms that do in build and
therefore reported in the PSCI caps, define K3_PM_SYSTEM_SUSPEND
flag that can be set during build that will cause appropriate
space and functionality to be included in build for system
suspend support.
Change-Id: I821fbbd5232d91de6c40f63254b855e285d9b3e8
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Increase the lite platform SEC_SRAM_SIZE to 128k to allow space
for GIC context.
Change-Id: I6414309757ce9a9b7b3a9233a401312bfc459a3b
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Add necessary K3 PSCI handlers to enable system suspend to be reported
in the PSCI capabilities when asked during OS boot.
Additionally, have the handlers provide information that all domains
should be off and also have the power domain suspend handler invoke the
TISCI_MSG_ENTER_SLEEP message to enter system suspend.
Change-Id: I351a16167770e9909e8ca525ee0d74fa93331194
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Add functions to save and restore GICv3 redist and dist contexts during
low power mode and then call these during the suspend entry and finish
psci handlers.
Change-Id: I26c2c0f3b7fc925de3b349499fa42d2405441577
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
This TISCI API must be used to trigger entry into system suspend, and
this is done through the use of TI_SCI_MSG_ENTER_SLEEP. Introduce a
method to send this message.
Change-Id: Id7af5fb2a34623ad69e76764f389ff4d8d259fba
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
* changes:
fix(versal): fix coverity scan warnings
feat(versal): get version for ATF related EEMI APIs
feat(versal): enhance PM_IOCTL EEMI API to support additional arg
feat(versal): add common interfaces to handle EEMI commands
The patch does below things.
1. As per current implementation, when Linux send a request to ATF to
get the version of APIs which are implemented in ATF then ATF wasn't
returning any version because there is a check for LIBPM module id.
The ATF is used to return version for the APIs which are implemented
in the firmware only.
Hence moved this switch-case before checking module id to get ATF
version.
Also, no need to pass Linux request to the firmware for the APIs
which are implemented in ATF instead return success after updating
version.
2. As per current implementation, higher 16-bit is used for ATF
version and lower 16-bit is used for firmware version. Now, removed
16-bit shift operation and send complete word i.e. 32-bit to Linux
user as there is no user who checks ATF version.
3. Add bit mask support in the feature check PM EEMI API for QUERY and
IOCTL ids.
Change-Id: Icdca3de6659f3b673b81a423ed79a3c20b678768
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
Currently, SMC handler is limited to parsing 5 arguments (1 API ID + 4
32-bit command args). Extend this handling to support one more 32-bit
command argument which is necessary to support new IOCTL IDs for
secure read/write interface.
Note that, this change is completely transparent and does not affect
existing functionality of any of the EEMI APIs.
Change-Id: I72016620eeeaf598f14853512120bfb30bb9a3e9
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@xilinx.com>
Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
This change adds common interfaces to handle commands from firmware driver
to power management controller. It removes big chunk of source line of code
that was handling each command separately and doing same repetitive work.
EEMI - Embedded Energy Management Interface is Xilinx proprietary
protocol to allow communication between power management controller
and different processing clusters.
As of now, Each EEMI command has its own implementation in TF-A.
This is redundant. Essentially most EEMI command implementation
in TF-A does same work. It prepares payload received from kernel, sends
payload to firmware, receives response from firmware and send response
back to kernel.
The same functionality can be achieved if common interface is used among
multiple EEMI commands. This change divides platform management related
SMCCC requests into 4 categories.
1) EEMI commands required for backward compatibility.
Some EEMI commands are still required for backward compatibility
until removed completely or its use is changed to accommodate
common interface
2) EEMI commands that require for PSCI interface and accessed from debugfs
For example EEMI calls related to CPU suspend/resume
3) TF-A specific requests
Functionality such as getting TF-A version and getting callback
data for platform management is handled by this interface
4) Common interface for rest of EEMI commands
This handlers performs payload and firmware response transaction job for
rest of EEMI commands. Also it parses module ID from SMC payload and inserts
in IPI request. If not module ID is found, then default is LIBPM_MODULE_ID.
This helps in making common path in TF-A for all the modules in PLM firmware
Change-Id: I57a2787c7fff9f2e1d1f9003b3daab092632d57e
Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
Depending on the shell used, the grep command can fail, leading to
a wrong dtc version detection. Correct that by adding quotes.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I329ec929559c94bf1bf99b127662c9d978e067cf
* changes:
refactor(stm32mp1-fdts): remove nvmem_layout node
refactor(stm32mp1): drop the "st,stm32-nvmem-layout" node
refactor(st): remove useless includes
The current implementation uses plat_arm API under generic code.
"plat_arm" API is a convention used with Arm common platform layer
and is reserved for that purpose. In addition, the function has a
weak definition which is not encouraged in TF-A.
Henceforth, removing the weak API with a configurable macro "TWED_DELAY"
of numeric data type in generic code and simplifying the implementation.
By default "TWED_DELAY" is defined to zero, and the delay value need to
be explicitly set by the platforms during buildtime.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I25cd6f628e863dc40415ced3a82d0662fdf2d75a
As part of the RFC:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/13651,
this patch adds the 'cm_prepare_el3_exit_ns' function. The function is
a wrapper to 'cm_prepare_el3_exit' function for Non-secure state.
When EL2 sysregs context exists (CTX_INCLUDE_EL2_REGS is
enabled) EL1 and EL2 sysreg values are restored from the context
instead of directly updating the registers.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I9b071030576bb05500d54090e2a03b3f125d1653
Used MBEDTLS_CONFIG_FILE macro for including mbedTLS
configuration.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Change-Id: I374b59a31df3ab1e69481b2c37a6f7455a106b6e
Venkatesh Yadav Abbarapu
Manish Pandey
Olivier Deprez
Kris Chaplin
Sieu Mun Tang
Abdul Halim, Muhammad Hadi Asyrafi
Chee Hong Ang
Ruchika Gupta
Manish V Badarkhe
Siew Chin Lim
Leon Chen
Dave Gerlach
Madhukar Pappireddy
Tanmay Shah
Ronak Jain
Lauren Wehrmeister
Yann Gautier
Jayanth Dodderi Chidanand
Zelalem Aweke
Sandrine Bailleux