The PL011 TRM (ARM DDI 0183G) specifies that the UART must be
disabled before any of the control registers are programmed. The
PL011 driver included in TF does not disable the UART, so the
initialization in BL2 and BL31 is violating this requirement
(and potentially in BL1 if the UART is enabled after reset).
This patch modifies the initialization function in the PL011
console driver to disable the UART before programming the
control registers.
Register clobber list and documentation updated.
FixesARM-software/tf-issues#300
Change-Id: I839b2d681d48b03f821ac53663a6a78e8b30a1a1
GIC v2 and v3 specification references in the porting guide
should refer to publically visible links, not ARM internal links.
Change-Id: Ib47c8adda6a03581f23bcaed72d71c08c7dd9fb1
Signed-off-by: Yuping Luo <yuping.luo@arm.com>
Migrate all direct usage of __attribute__ to usage of their
corresponding macros from cdefs.h.
e.g.:
- __attribute__((unused)) -> __unused
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
This patch adds a brief description of 'MAX_MMAP_REGIONS' and
'ADDR_SPACE_SIZE' to the Porting Guide. These fields must be defined
by the platform in order to use the translation table library.
Change-Id: Ida366458fe2bc01979091a014dc38da0fae5991e
This patch adds design documentation for the Firmware Update (FWU)
feature in `firmware-update.md`. It provides an overview of FWU,
describes the BL1 SMC interface, and includes diagrams showing
an example FWU boot flow and the FWU state machine.
This patch also updates the existing TF documents where needed:
* `porting-guide.md`
* `user-guide.md`
* `firmware-design.md`
* `rt-svc-writers-guide.md`
* `trusted_board_boot.md`
Change-Id: Ie6de31544429b18f01327bd763175e218299a4ce
Co-Authored-By: Dan Handley <dan.handley@arm.com>
This patch updates the relevant documentation in ARM Trusted Firmware
for the new GIC drivers. The user-guide.md and porting-guide.md have been
updated as follows:
* The build option to compile Trusted Firmware with different GIC drivers
for FVP has been explained in the user-guide.md.
* The implementation details of interrupt management framework porting
APIs for GICv3 have been added in porting-guide.md.
* The Linaro tracking kernel release does not work OOB in GICv3 mode.
The instructions for changing UEFI configuration in order to run with
the new GICv3 driver in ARM TF have been added to user-guide.md.
The interrupt-framework-design.md has been updated as follows:
* Describes support for registering and handling interrupts targeted to EL3
e.g. Group 0 interrupts in GICv3.
* Describes the build option `TSP_NS_INTR_ASYNC_PREEMPT` in detail.
* Describes preemption of TSP in S-EL1 by non secure interrupts and
also possibly by higher priority EL3 interrupts.
* Describes the normal world sequence for issuing `standard` SMC calls.
* Modifies the document to correspond to the current state of interrupt
handling in TSPD and TSP.
* Modifies the various functions names in the document to reflect
the current names used in code.
Change-Id: I78c9514b5be834f193405aad3c1752a4a9e27a6c
This patch removes the dash character from the image name, to
follow the image terminology in the Trusted Firmware Wiki page:
https://github.com/ARM-software/arm-trusted-firmware/wiki
Changes apply to output messages, comments and documentation.
non-ARM platform files have been left unmodified.
Change-Id: Ic2a99be4ed929d52afbeb27ac765ceffce46ed76
This patch replaces all references to the SCP Firmware (BL0, BL30,
BL3-0, bl30) with the image terminology detailed in the TF wiki
(https://github.com/ARM-software/arm-trusted-firmware/wiki):
BL0 --> SCP_BL1
BL30, BL3-0 --> SCP_BL2
bl30 --> scp_bl2
This change affects code, documentation, build system, tools and
platform ports that load SCP firmware. ARM plaforms have been
updated to the new porting API.
IMPORTANT: build option to specify the SCP FW image has changed:
BL30 --> SCP_BL2
IMPORTANT: This patch breaks compatibility for platforms that use BL2
to load SCP firmware. Affected platforms must be updated as follows:
BL30_IMAGE_ID --> SCP_BL2_IMAGE_ID
BL30_BASE --> SCP_BL2_BASE
bl2_plat_get_bl30_meminfo() --> bl2_plat_get_scp_bl2_meminfo()
bl2_plat_handle_bl30() --> bl2_plat_handle_scp_bl2()
Change-Id: I24c4c1a4f0e4b9f17c9e4929da815c4069549e58
This patch overrides the default weak definition of
`bl31_plat_runtime_setup()` for ARM Standard platforms to
specify a BL31 runtime console. ARM Standard platforms are
now expected to define `PLAT_ARM_BL31_RUN_UART_BASE` and
`PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ` macros which is required
by `arm_bl31_plat_runtime_setup()` to initialize the runtime
console.
The system suspend resume helper `arm_system_pwr_domain_resume()`
is fixed to initialize the runtime console rather than the boot
console on resumption from system suspend.
FixesARM-software/tf-issues#220
Change-Id: I80eafe5b6adcfc7f1fdf8b99659aca1c64d96975
It is not ideal for BL31 to continue to use boot console at
runtime which could be potentially uninitialized. This patch
introduces a new optional platform porting API
`bl31_plat_runtime_setup()` which allows the platform to perform
any BL31 runtime setup just prior to BL31 exit during cold boot.
The default weak implementation of this function will invoke
`console_uninit()` which will suppress any BL31 runtime logs.
On the ARM Standard platforms, there is an anomaly that
the boot console will be reinitialized on resumption from
system suspend in `arm_system_pwr_domain_resume()`. This
will be resolved in the following patch.
NOTE: The default weak definition of `bl31_plat_runtime_setup()`
disables the BL31 console. To print the BL31 runtime
messages, platforms must override this API and initialize a
runtime console.
FixesARM-software/tf-issues#328
Change-Id: Ibaf8346fcceb447fe1a5674094c9f8eb4c09ac4a
This patch introduces a new build option named COLD_BOOT_SINGLE_CPU,
which allows platforms that only release a single CPU out of reset to
slightly optimise their cold boot code, both in terms of code size
and performance.
COLD_BOOT_SINGLE_CPU defaults to 0, which assumes that the platform
may release several CPUs out of reset. In this case, the cold reset
code needs to coordinate all CPUs via the usual primary/secondary
CPU distinction.
If a platform guarantees that only a single CPU will ever be released
out of reset, there is no need to arbitrate execution ; the notion of
primary and secondary CPUs itself no longer exists. Such platforms
may set COLD_BOOT_SINGLE_CPU to 1 in order to compile out the
primary/secondary CPU identification in the cold reset code.
All ARM standard platforms can release several CPUs out of reset
so they use COLD_BOOT_SINGLE_CPU=0. However, on CSS platforms like
Juno, bringing up more than one CPU at reset should only be attempted
when booting an EL3 payload, as it is not fully supported in the
normal boot flow.
For platforms using COLD_BOOT_SINGLE_CPU=1, the following 2 platform
APIs become optional:
- plat_secondary_cold_boot_setup();
- plat_is_my_cpu_primary().
The Porting Guide has been updated to reflect that.
User Guide updated as well.
Change-Id: Ic5b474e61b7aec1377d1e0b6925d17dfc376c46b
Normally, in the FVP port, secondary CPUs are immediately powered
down if they are powered on at reset. However, when booting an EL3
payload, we need to keep them powered on as the requirement is for
all CPUs to enter the EL3 payload image. This patch puts them in a
holding pen instead of powering them off.
Change-Id: I6526a88b907a0ddb820bead72f1d350a99b1692c
This patch adds support for booting EL3 payloads on CSS platforms,
for example Juno. In this scenario, the Trusted Firmware follows
its normal boot flow up to the point where it would normally pass
control to the BL31 image. At this point, it jumps to the EL3
payload entry point address instead.
Before handing over to the EL3 payload, the data SCP writes for AP
at the beginning of the Trusted SRAM is restored, i.e. we zero the
first 128 bytes and restore the SCP Boot configuration. The latter
is saved before transferring the BL30 image to SCP and is restored
just after the transfer (in BL2). The goal is to make it appear that
the EL3 payload is the first piece of software to run on the target.
The BL31 entrypoint info structure is updated to make the primary
CPU jump to the EL3 payload instead of the BL31 image.
The mailbox is populated with the EL3 payload entrypoint address,
which releases the secondary CPUs out of their holding pen (if the
SCP has powered them on). The arm_program_trusted_mailbox() function
has been exported for this purpose.
The TZC-400 configuration in BL2 is simplified: it grants secure
access only to the whole DRAM. Other security initialization is
unchanged.
This alternative boot flow is disabled by default. A new build option
EL3_PAYLOAD_BASE has been introduced to enable it and provide the EL3
payload's entry point address. The build system has been modified
such that BL31 and BL33 are not compiled and/or not put in the FIP in
this case, as those images are not used in this boot flow.
Change-Id: Id2e26fa57988bbc32323a0effd022ab42f5b5077
This patch modifies the prototype of the bl1_plat_prepare_exit()
platform API to pass the address of the entry point info structure
received from BL2. The structure contains information that can be
useful, depending on the kind of clean up or bookkeeping operations
to perform.
The weak implementation of this function ignores this argument to
preserve platform backwards compatibility.
NOTE: THIS PATCH MAY BREAK PLATFORM PORTS THAT ARE RELYING ON THE
FORMER PROTOTYPE OF THE BL1_PLAT_PREPARE_EXIT() API.
Change-Id: I3fc18f637de06c85719c4ee84c85d6a4572a0fdb
The IMF_READ_INTERRUPT_ID build option enables a feature where the interrupt
ID of the highest priority pending interrupt is passed as a parameter to the
interrupt handler registered for that type of interrupt. This additional read
of highest pending interrupt id from GIC is problematic as it is possible that
the original interrupt may get deasserted and another interrupt of different
type maybe become the highest pending interrupt. Hence it is safer to prevent
such behaviour by removing the IMF_READ_INTERRUPT_ID build option.
The `id` parameter of the interrupt handler `interrupt_type_handler_t` is
now made a reserved parameter with this patch. It will always contain
INTR_ID_UNAVAILABLE.
FixesARM-software/tf-issues#307
Change-Id: I2173aae1dd37edad7ba6bdfb1a99868635fa34de
This patch adds an optional API to the platform port:
void plat_error_handler(int err) __dead2;
The platform error handler is called when there is a specific error
condition after which Trusted Firmware cannot continue. While panic()
simply prints the crash report (if enabled) and spins, the platform
error handler can be used to hand control over to the platform port
so it can perform specific bookeeping or post-error actions (for
example, reset the system). This function must not return.
The parameter indicates the type of error using standard codes from
errno.h. Possible errors reported by the generic code are:
-EAUTH : a certificate or image could not be authenticated
(when Trusted Board Boot is enabled)
-ENOENT : the requested image or certificate could not be found
or an IO error was detected
-ENOMEM : resources exhausted. Trusted Firmware does not use
dynamic memory, so this error is usually an indication
of an incorrect array size
A default weak implementation of this function has been provided.
It simply implements an infinite loop.
Change-Id: Iffaf9eee82d037da6caa43b3aed51df555e597a3
This patch is a complete rework of the main Makefile. Functionality
remains the same but the code has been reorganized in sections in
order to improve readability and facilitate adding future extensions.
A new file 'build_macros.mk' has been created and will contain common
definitions (variables, macros, etc) that may be used from the main
Makefile and other platform specific makefiles.
A new macro 'FIP_ADD_IMG' has been introduced and it will allow the
platform to specify binary images and the necessary checks for a
successful build. Platforms that require a BL30 image no longer need
to specify the NEED_BL30 option. The main Makefile is now completely
unaware of additional images not built as part of Trusted Firmware,
like BL30. It is the platform responsibility to specify images using
the macro 'FIP_ADD_IMG'. Juno uses this macro to include the BL30
image in the build.
BL33 image is specified in the main Makefile to preserve backward
compatibility with the NEED_BL33 option. Otherwise, platform ports
that rely on the definition of NEED_BL33 might break.
All Trusted Board Boot related definitions have been moved to a
separate file 'tbbr_tools.mk'. The main Makefile will include this
file unless the platform indicates otherwise by setting the variable
'INCLUDE_TBBR_MK := 0' in the corresponding platform.mk file. This
will keep backward compatibility but ideally each platform should
include the corresponding TBB .mk file in platform.mk.
Change-Id: I35e7bc9930d38132412e950e20aa2a01e2b26801
This patch redefines the values of IO_FAIL, IO_NOT_SUPPORTED and
IO_RESOURCES_EXHAUSTED to match the corresponding definitions in
errno.h:
#define IO_FAIL (-ENOENT)
#define IO_NOT_SUPPORTED (-ENODEV)
#define IO_RESOURCES_EXHAUSTED (-ENOMEM)
NOTE: please note that the IO_FAIL, IO_NOT_SUPPORTED and
IO_RESOURCES_EXHAUSTED definitions are considered deprecated
and their usage should be avoided. Callers should rely on errno.h
definitions when checking the return values of IO functions.
Change-Id: Ic8491aa43384b6ee44951ebfc053a3ded16a80be
This patch adds an optional API to the platform port:
void bl1_plat_prepare_exit(void);
This function is called prior to exiting BL1 in response to the
RUN_IMAGE_SMC request raised by BL2. It should be used to perform
platform specific clean up or bookkeeping operations before
transferring control to the next image.
A weak empty definition of this function has been provided to
preserve platform backwards compatibility.
Change-Id: Iec09697de5c449ae84601403795cdb6aca166ba1
When a platform port does not define PLAT_PERCPU_BAKERY_LOCK_SIZE, the total
memory that should be allocated per-cpu to accommodate all bakery locks is
calculated by the linker in bl31.ld.S. The linker stores this value in the
__PERCPU_BAKERY_LOCK_SIZE__ linker symbol. The runtime value of this symbol is
different from the link time value as the symbol is relocated into the current
section (.bss). This patch fixes this issue by marking the symbol as ABSOLUTE
which allows it to retain its correct value even at runtime.
The description of PLAT_PERCPU_BAKERY_LOCK_SIZE in the porting-guide.md has been
made clearer as well.
Change-Id: Ia0cfd42f51deaf739d792297e60cad5c6e6e610b
This patch unifies the bakery lock api's across coherent and normal
memory implementation of locks by using same data type `bakery_lock_t`
and similar arguments to functions.
A separate section `bakery_lock` has been created and used to allocate
memory for bakery locks using `DEFINE_BAKERY_LOCK`. When locks are
allocated in normal memory, each lock for a core has to spread
across multiple cache lines. By using the total size allocated in a
separate cache line for a single core at compile time, the memory for
other core locks is allocated at link time by multiplying the single
core locks size with (PLATFORM_CORE_COUNT - 1). The normal memory lock
algorithm now uses lock address instead of the `id` in the per_cpu_data.
For locks allocated in coherent memory, it moves locks from
tzfw_coherent_memory to bakery_lock section.
The bakery locks are allocated as part of bss or in coherent memory
depending on usage of coherent memory. Both these regions are
initialised to zero as part of run_time_init before locks are used.
Hence, bakery_lock_init() is made an empty function as the lock memory
is already initialised to zero.
The above design lead to the removal of psci bakery locks from
non_cpu_power_pd_node to psci_locks.
NOTE: THE BAKERY LOCK API WHEN USE_COHERENT_MEM IS NOT SET HAS CHANGED.
THIS IS A BREAKING CHANGE FOR ALL PLATFORM PORTS THAT ALLOCATE BAKERY
LOCKS IN NORMAL MEMORY.
Change-Id: Ic3751c0066b8032dcbf9d88f1d4dc73d15f61d8b
This patch adds the necessary documentation updates to porting_guide.md
for the changes in the platform interface mandated as a result of the new
PSCI Topology and power state management frameworks. It also adds a
new document `platform-migration-guide.md` to aid the migration of existing
platform ports to the new API.
The patch fixes the implementation and callers of
plat_is_my_cpu_primary() to use w0 as the return parameter as implied by
the function signature rather than x0 which was used previously.
Change-Id: Ic11e73019188c8ba2bd64c47e1729ff5acdcdd5b
Since there is a unique warm reset entry point, the FVP and Juno
port can use a single mailbox instead of maintaining one per core.
The mailbox gets programmed only once when plat_setup_psci_ops()
is invoked during PSCI initialization. This means mailbox is not
zeroed out during wakeup.
Change-Id: Ieba032a90b43650f970f197340ebb0ce5548d432
The authentication framework deprecates plat_match_rotpk()
in favour of plat_get_rotpk_info(). This patch removes
plat_match_rotpk() from the platform port.
Change-Id: I2250463923d3ef15496f9c39678b01ee4b33883b
This patch extends the platform port by adding an API that returns
either the Root of Trust public key (ROTPK) or its hash. This is
usually stored in ROM or eFUSE memory. The ROTPK returned must be
encoded in DER format according to the following ASN.1 structure:
SubjectPublicKeyInfo ::= SEQUENCE {
algorithm AlgorithmIdentifier,
subjectPublicKey BIT STRING
}
In case the platform returns a hash of the key:
DigestInfo ::= SEQUENCE {
digestAlgorithm AlgorithmIdentifier,
keyDigest OCTET STRING
}
An implementation for ARM development platforms is provided in this
patch. When TBB is enabled, the ROTPK hash location must be specified
using the build option 'ARM_ROTPK_LOCATION'. Available options are:
- 'regs' : return the ROTPK hash stored in the Trusted
root-key storage registers.
- 'devel_rsa' : return a ROTPK hash embedded in the BL1 and
BL2 binaries. This hash has been obtained from the development
RSA public key located in 'plat/arm/board/common/rotpk'.
On FVP, the number of MMU tables has been increased to map and
access the ROTPK registers.
A new file 'board_common.mk' has been added to improve code sharing
in the ARM develelopment platforms.
Change-Id: Ib25862e5507d1438da10773e62bd338da8f360bf
The Trusted firmware code identifies BL images by name. The platform
port defines a name for each image e.g. the IO framework uses this
mechanism in the platform function plat_get_image_source(). For
a given image name, it returns the handle to the image file which
involves comparing images names. In addition, if the image is
packaged in a FIP, a name comparison is required to find the UUID
for the image. This method is not optimal.
This patch changes the interface between the generic and platform
code with regard to identifying images. The platform port must now
allocate a unique number (ID) for every image. The generic code will
use the image ID instead of the name to access its attributes.
As a result, the plat_get_image_source() function now takes an image
ID as an input parameter. The organisation of data structures within
the IO framework has been rationalised to use an image ID as an index
into an array which contains attributes of the image such as UUID and
name. This prevents the name comparisons.
A new type 'io_uuid_spec_t' has been introduced in the IO framework
to specify images identified by UUID (i.e. when the image is contained
in a FIP file). There is no longer need to maintain a look-up table
[iname_name --> uuid] in the io_fip driver code.
Because image names are no longer mandatory in the platform port, the
debug messages in the generic code will show the image identifier
instead of the file name. The platforms that support semihosting to
load images (i.e. FVP) must provide the file names as definitions
private to the platform.
The ARM platform ports and documentation have been updated accordingly.
All ARM platforms reuse the image IDs defined in the platform common
code. These IDs will be used to access other attributes of an image in
subsequent patches.
IMPORTANT: applying this patch breaks compatibility for platforms that
use TF BL1 or BL2 images or the image loading code. The platform port
must be updated to match the new interface.
Change-Id: I9c1b04cb1a0684c6ee65dee66146dd6731751ea5
This patch adds support for SYSTEM_SUSPEND API as mentioned in the PSCI 1.0
specification. This API, on being invoked on the last running core on a
supported platform, will put the system into a low power mode with memory
retention.
The psci_afflvl_suspend() internal API has been reused as most of the actions
to suspend a system are the same as invoking the PSCI CPU_SUSPEND API with the
target affinity level as 'system'. This API needs the 'power state' parameter
for the target low power state. This parameter is not passed by the caller of
the SYSTEM_SUSPEND API. Hence, the platform needs to implement the
get_sys_suspend_power_state() platform function to provide this information.
Also, the platform also needs to add support for suspending the system to the
existing 'plat_pm_ops' functions: affinst_suspend() and
affinst_suspend_finish().
Change-Id: Ib6bf10809cb4e9b92f463755608889aedd83cef5
The attempt to run the CPU reset code as soon as possible after reset
results in highly complex conditional code relating to the
RESET_TO_BL31 option.
This patch relaxes this requirement a little. In the BL1, BL3-1 and
PSCI entrypoints code, the sequence of operations is now as follows:
1) Detect whether it is a cold or warm boot;
2) For cold boot, detect whether it is the primary or a secondary
CPU. This is needed to handle multiple CPUs entering cold reset
simultaneously;
3) Run the CPU init code.
This patch also abstracts the EL3 registers initialisation done by
the BL1, BL3-1 and PSCI entrypoints into common code.
This improves code re-use and consolidates the code flows for
different types of systems.
NOTE: THE FUNCTION plat_secondary_cold_boot() IS NOW EXPECTED TO
NEVER RETURN. THIS PATCH FORCES PLATFORM PORTS THAT RELIED ON THE
FORMER RETRY LOOP AT THE CALL SITE TO MODIFY THEIR IMPLEMENTATION.
OTHERWISE, SECONDARY CPUS WILL PANIC.
Change-Id: If5ecd74d75bee700b1bd718d23d7556b8f863546
This patch removes the FIRST_RESET_HANDLER_CALL build flag and its
use in ARM development platforms. If a different reset handling
behavior is required between the first and subsequent invocations
of the reset handling code, this should be detected at runtime.
On Juno, the platform reset handler is now always compiled in.
This means it is now executed twice on the cold boot path, first in
BL1 then in BL3-1, and it has the same behavior in both cases. It is
also executed twice on the warm boot path, first in BL1 then in the
PSCI entrypoint code.
Also update the documentation to reflect this change.
NOTE: THIS PATCH MAY FORCE PLATFORM PORTS THAT USE THE
FIRST_RESET_HANDLER_CALL BUILD OPTION TO FIX THEIR RESET HANDLER.
Change-Id: Ie5c17dbbd0932f5fa3b446efc6e590798a5beae2
Update the User Guide, Porting Guide and Firmware Design documents
to align them with the recent changes made to the FVP and Juno
platform ports.
Also fix some other historical inaccuracies.
Change-Id: I37aba4805f9044b1a047996d3e396c75f4a09176
This patch removes the plat_get_max_afflvl() platform API
and instead replaces it with a platform macro PLATFORM_MAX_AFFLVL.
This is done because the maximum affinity level for a platform
is a static value and it is more efficient for it to be defined
as a platform macro.
NOTE: PLATFORM PORTS NEED TO BE UPDATED ON MERGE OF THIS COMMIT
FixesARM-Software/tf-issues#265
Change-Id: I31d89b30c2ccda30d28271154d869060d50df7bf
This patch updates the user-guide.md with the various build options related to
Trusted Board Boot and steps to build a FIP image which includes this
support. It also adds a trusted-board-boot.md which describes the scope and
design of this feature.
Change-Id: Ifb421268ebf7e06a135684c8ebb04c94835ce061
The CPU specific reset handlers no longer have the freedom
of using any general purpose register because it is being invoked
by the BL3-1 entry point in addition to BL1. The Cortex-A57 CPU
specific reset handler was overwriting x20 register which was being
used by the BL3-1 entry point to save the entry point information.
This patch fixes this bug by reworking the register allocation in the
Cortex-A57 reset handler to avoid using x20. The patch also
explicitly mentions the register clobber list for each of the
callee functions invoked by the reset handler
Change-Id: I28fcff8e742aeed883eaec8f6c4ee2bd3fce30df
This patch adds the function plat_match_rotpk() to the platform
porting layer to provide a Root Of Trust Public key (ROTPK)
verification mechanism. This function is called during the
Trusted Board Boot process and receives a supposed valid copy
of the ROTPK as a parameter, usually obtained from an external
source (for instance, a certificate). It returns 0 (success) if
that key matches the actual ROTPK stored in the system or any
other value otherwise.
The mechanism to access the actual ROTPK stored in the system
is platform specific and should be implemented as part of this
function. The format of the ROTPK is also platform specific
(to save memory, some platforms might store a hash of the key
instead of the whole key).
TRUSTED_BOARD_BOOT build option has been added to allow the user
to enable the Trusted Board Boot features. The implementation of
the plat_match_rotpk() funtion is mandatory when Trusted Board
Boot is enabled.
For development purposes, FVP and Juno ports provide a dummy
function that returns always success (valid key). A safe trusted
boot implementation should provide a proper matching function.
Documentation updated accordingly.
Change-Id: I74ff12bc2b041556c48533375527d9e8c035b8c3
This patch adds support to call the reset_handler() function in BL3-1 in the
cold and warm boot paths when another Boot ROM reset_handler() has already run.
This means the BL1 and BL3-1 versions of the CPU and platform specific reset
handlers may execute different code to each other. This enables a developer to
perform additional actions or undo actions already performed during the first
call of the reset handlers e.g. apply additional errata workarounds.
Typically, the reset handler will be first called from the BL1 Boot ROM. Any
additional functionality can be added to the reset handler when it is called
from BL3-1 resident in RW memory. The constant FIRST_RESET_HANDLER_CALL is used
to identify whether this is the first version of the reset handler code to be
executed or an overridden version of the code.
The Cortex-A57 errata workarounds are applied only if they have not already been
applied.
FixesARM-software/tf-issue#275
Change-Id: Id295f106e4fda23d6736debdade2ac7f2a9a9053
This patch allows the platform to validate the power_state and
entrypoint information from the normal world early on in PSCI
calls so that we can return the error safely. New optional
pm_ops hooks `validate_power_state` and `validate_ns_entrypoint`
are introduced to do this.
As a result of these changes, all the other pm_ops handlers except
the PSCI_ON handler are expected to be successful. Also, the PSCI
implementation will now assert if a PSCI API is invoked without the
corresponding pm_ops handler being registered by the platform.
NOTE : PLATFORM PORTS WILL BREAK ON MERGE OF THIS COMMIT. The
pm hooks have 2 additional optional callbacks and the return type
of the other hooks have changed.
FixesARM-Software/tf-issues#229
Change-Id: I036bc0cff2349187c7b8b687b9ee0620aa7e24dc
This patch removes the non-secure entry point information being passed
to the platform pm_ops which is not needed. Also, it removes the `mpidr`
parameter for platform pm hooks which are meant to do power management
operations only on the current cpu.
NOTE: PLATFORM PORTS MUST BE UPDATED AFTER MERGING THIS COMMIT.
Change-Id: If632376a990b7f3b355f910e78771884bf6b12e7
This patch extends the build option `USE_COHERENT_MEMORY` to
conditionally remove coherent memory from the memory maps of
all boot loader stages. The patch also adds necessary
documentation for coherent memory removal in firmware-design,
porting and user guides.
FixesARM-Software/tf-issues#106
Change-Id: I260e8768c6a5c2efc402f5804a80657d8ce38773
This patch adds support for supplying pre-built BL binaries for BL2,
BL3-1 and BL3-2 during trusted firmware build. Specifying BLx = <path_to_BLx>
in the build command line, where 'x' is any one of BL2, BL3-1 or BL3-2, will
skip building that BL stage from source and include the specified binary in
final fip image.
This patch also makes BL3-3 binary for FIP optional depending on the
value of 'NEED_BL33' flag which is defined by the platform.
FixesARM-software/tf-issues#244FixesARM-software/tf-issues#245
Change-Id: I3ebe1d4901f8b857e8bb51372290978a3323bfe7
This patch gathers miscellaneous minor fixes to the documentation, and comments
in the source code.
Change-Id: I631e3dda5abafa2d90f464edaee069a1e58b751b
Co-Authored-By: Soby Mathew <soby.mathew@arm.com>
Co-Authored-By: Dan Handley <dan.handley@arm.com>
This patch adds CPU core and cluster power down sequences to the CPU specific
operations framework introduced in a earlier patch. Cortex-A53, Cortex-A57 and
generic AEM sequences have been added. The latter is suitable for the
Foundation and Base AEM FVPs. A pointer to each CPU's operations structure is
saved in the per-cpu data so that it can be easily accessed during power down
seqeunces.
An optional platform API has been introduced to allow a platform to disable the
Accelerator Coherency Port (ACP) during a cluster power down sequence. The weak
definition of this function (plat_disable_acp()) does not take any action. It
should be overriden with a strong definition if the ACP is present on a
platform.
Change-Id: I8d09bd40d2f528a28d2d3f19b77101178778685d
This patch adds an optional platform API (plat_reset_handler) which allows the
platform to perform any actions immediately after a cold or warm reset
e.g. implement errata workarounds. The function is called with MMU and caches
turned off. This API is weakly defined and does nothing by default but can be
overriden by a platform with a strong definition.
Change-Id: Ib0acdccbd24bc756528a8bd647df21e8d59707ff
* Move TSP platform porting functions to new file:
include/bl32/tsp/platform_tsp.h.
* Create new TSP_IRQ_SEC_PHY_TIMER definition for use by the generic
TSP interrupt handling code, instead of depending on the FVP
specific definition IRQ_SEC_PHY_TIMER.
* Rename TSP platform porting functions from bl32_* to tsp_*, and
definitions from BL32_* to TSP_*.
* Update generic TSP code to use new platform porting function names
and definitions.
* Update FVP port accordingly and move all TSP source files to:
plat/fvp/tsp/.
* Update porting guide with above changes.
Note: THIS CHANGE REQUIRES ALL PLATFORM PORTS OF THE TSP TO
BE UPDATED
FixesARM-software/tf-issues#167
Change-Id: Ic0ff8caf72aebb378d378193d2f017599fc6b78f
The intent of io_init() was to allow platform ports to provide
a data object (io_plat_data_t) to the IO storage framework to
allocate into. The abstraction was incomplete because io_plat_data_t
uses a platform defined constant and the IO storage framework
internally allocates other arrays using platform defined constants.
This change simplifies the implementation by instantiating the
supporting objects in the IO storage framework itself. There is now
no need for the platform to call io_init().
The FVP port has been updated accordingly.
THIS CHANGE REQUIRES ALL PLATFORM PORTS THAT USE THE IO STORAGE
FRAMEWORK TO BE UDPATED.
Change-Id: Ib48ac334de9e538064734334c773f8b43df3a7dc
Secure ROM at address 0x0000_0000 is defined as FVP_TRUSTED_ROM
Secure RAM at address 0x0400_0000 is defined as FVP_TRUSTED_SRAM
Secure RAM at address 0x0600_0000 is defined as FVP_TRUSTED_DRAM
BLn_BASE and BLn_LIMIT definitions have been updated and are based on
these new memory regions.
The available memory for each bootloader in the linker script is
defined by BLn_BASE and BLn_LIMIT, instead of the complete memory
region.
TZROM_BASE/SIZE and TZRAM_BASE/SIZE are no longer required as part of
the platform porting.
FVP common definitions are defined in fvp_def.h while platform_def.h
contains exclusively (with a few exceptions) the definitions that are
mandatory in the porting guide. Therefore, platform_def.h now includes
fvp_def.h instead of the other way around.
Porting guide has been updated to reflect these changes.
Change-Id: I39a6088eb611fc4a347db0db4b8f1f0417dbab05
The purpose of platform_is_primary_cpu() is to determine after reset
(BL1 or BL3-1 with reset handler) if the current CPU must follow the
cold boot path (primary CPU), or wait in a safe state (secondary CPU)
until the primary CPU has finished the system initialization.
This patch removes redundant calls to platform_is_primary_cpu() in
subsequent bootloader entrypoints since the reset handler already
guarantees that code is executed exclusively on the primary CPU.
Additionally, this patch removes the weak definition of
platform_is_primary_cpu(), so the implementation of this function
becomes mandatory. Removing the weak symbol avoids other
bootloaders accidentally picking up an invalid definition in case the
porting layer makes the real function available only to BL1.
The define PRIMARY_CPU is no longer mandatory in the platform porting
because platform_is_primary_cpu() hides the implementation details
(for instance, there may be platforms that report the primary CPU in
a system register). The primary CPU definition in FVP has been moved
to fvp_def.h.
The porting guide has been updated accordingly.
FixesARM-software/tf-issues#219
Change-Id: If675a1de8e8d25122b7fef147cb238d939f90b5e
This patch adds the CPUECTLR_EL1 register and the CCI Snoop Control
register to the list of registers being reported when an unhandled
exception occurs.
Change-Id: I2d997f2d6ef3d7fa1fad5efe3364dc9058f9f22c
This patch introduces platform APIs to initialise and
print a character on a designated crash console.
For the FVP platform, PL011_UART0 is the designated
crash console. The platform porting guide is also updated
to document the new APIs.
Change-Id: I5e97d8762082e0c88c8c9bbb479353eac8f11a66
This patch removes the allocation of memory for coherent stacks, associated
accessor function and some dead code which called the accessor function. It also
updates the porting guide to remove the concept and the motivation behind using
stacks allocated in coherent memory.
FixesARM-software/tf-issues#198
Change-Id: I00ff9a04f693a03df3627ba39727e3497263fc38
Update the "Memory layout on FVP platforms" section in the Firmware
Design document to reflect the overlaying of BL1 and BL2 images
by BL3-1 and BL3-2.
Also update the Porting Guide document to mention the
BL31_PROGBITS_LIMIT and BL32_PROGBITS_LIMIT constants.
Change-Id: I0b23dae5b5b4490a01be7ff7aa80567cff34bda8
- Add support for loading a BL3-0 image in BL2. Information about
memory extents is populated by platform-specific code. Subsequent
handling of BL3-0 is also platform specific.
The BL2 main function has been broken down to improve readability.
The BL3-2 image is now loaded before the BL3-3 image to align with
the boot flow.
- Build system: Add support for specifying a BL3-0 image that will be
included into the FIP image.
- IO FIP driver: Add support for identifying a BL3-0 image inside a
FIP image.
- Update the documentation to reflect the above changes.
Change-Id: I067c184afd52ccaa86569f13664757570c86fc48
This concept is no longer required since we now support loading of
images at fixed addresses only.
The image loader now automatically detects the position of the image
inside the current memory layout and updates the layout such that
memory fragmentation is minimised.
The 'attr' field of the meminfo data structure, which used to hold
the bottom/top loading information, has been removed. Also the 'next'
field has been removed as it wasn't used anywhere.
The 'init_bl2_mem_layout()' function has been moved out of common
code and put in BL1-specific code. It has also been renamed into
'bl1_init_bl2_mem_layout'.
FixesARM-software/tf-issues#109
Change-Id: I3f54642ce7b763d5ee3b047ad0ab59eabbcf916d
The array of affinity nodes is currently allocated for 32 entries
with the PSCI_NUM_AFFS value defined in psci.h. This is not enough
for large systems, and will substantially over allocate the array
for small systems.
This patch introduces an optional platform definition
PLATFORM_NUM_AFFS to platform_def.h. If defined this value is
used for PSCI_NUM_AFFS, otherwise a value of two times the number
of CPU cores is used.
The FVP port defines PLATFORM_NUM_AFFS to be 10 which saves
nearly 1.5KB of memory.
FixesARM-software/tf-issues#192
Change-Id: I68e30ac950de88cfbd02982ba882a18fb69c1445
This patch adds documentation that describes the design of the Interrupt
management framework in the ARM Trusted Firmware. The porting-guide.md has also
been updated to describe the interface that should be implemented by each
platform to support this framework.
Change-Id: I3eda48e5c9456e6a9516956bee16a29e366633b7
Co-Authored-By: Soby Mathew <soby.mathew@arm.com>
Update documentation with BL3-1 hardening interface
changes and for using BL3-1 as a reset vector feature
Change-Id: Iafdd05e7a8e66503409f2acc934372efef5bc51b
This patch modifies and adds to the existing documentation
for the crash reporting implementation in BL3-1.
Change-Id: I2cfbfeeeb64996ec7d19a9ddf95295482899b4bd
Following recent refactoring changes to platform.h, this commit updates
porting-guide.md to correctly refer to platform.h and platform_def.h where
appropriate.
Change-Id: Idf1e77503c24358696f8f3c14caa0cc1d579deb4
Rework the "Memory layout on FVP platforms" section in the Firmware
Design document. Add information about where the TSP image fits
in the memory layout when present.
Add documentation for the base addresses of each bootloader image
in the porting guide.
Change-Id: I4afb2605e008a1cb28c44a697804f2cb6bb4c9aa
The generic image loading and IO FIP code no longer forces the
platform to create BL3-2 (Secure-EL1 Payload) specific
definitions. The BL3-2 loading code in bl2/bl2main.c is wrapped
by a #ifdef BL32_BASE blocks, allowing the BL3-2 definitions to
be optional. Similarly for the name_uuid array defintion in
drivers/io/io_fip.c.
Also update the porting guide to reflect this change.
The BL3-2 platform definitions remain non-configurably present
in the FVP port.
FixesARM-software/tf-issues#68
Change-Id: Iea28b4e94d87a31f5522f271e290919a8a955460
The TSP's linker script used to assume that the TSP would
execute from secure DRAM. Although it is currently the case
on FVPs, platforms are free to use any secure memory they wish.
This patch introduces the flexibility to load the TSP into any
secure memory. The platform code gets to specify the extents of
this memory in the platform header file, as well as the BL3-2 image
limit address. The latter definition allows to check in a generic way
that the BL3-2 image fits in its bounds.
Change-Id: I9450f2d8b32d74bd00b6ce57a0a1542716ab449c
This patch implements the register reporting when unhandled exceptions are
taken in BL3-1. Unhandled exceptions will result in a dump of registers
to the console, before halting execution by that CPU. The Crash Stack,
previously called the Exception Stack, is used for this activity.
This stack is used to preserve the CPU context and runtime stack
contents for debugging and analysis.
This also introduces the per_cpu_ptr_cache, referenced by tpidr_el3,
to provide easy access to some of BL3-1 per-cpu data structures.
Initially, this is used to provide a pointer to the Crash stack.
panic() now prints the the error file and line number in Debug mode
and prints the PC value in release mode.
The Exception Stack is renamed to Crash Stack with this patch.
The original intention of exception stack is no longer valid
since we intend to support several valid exceptions like IRQ
and FIQ in the trusted firmware context. This stack is now
utilized for dumping and reporting the system state when a
crash happens and hence the rename.
FixesARM-software/tf-issues#79 Improve reporting of unhandled exception
Change-Id: I260791dc05536b78547412d147193cdccae7811a
The TZC configuration on FVP was incorrectly allowing both secure
and non-secure accesses to the DRAM, which can cause aliasing
problems for software. It was also not enabling virtio access on
some models.
This patch fixes both of those issues. The patch also enabless
non-secure access to the DDR RAM for all devices with defined IDs.
The third region of DDR RAM has been removed from the configuration
as this is not used in any of the FVP models.
FixesARM-software/tf-issues#150FixesARM-software/tf-issues#151
Change-Id: I60ad5daaf55e14f178affb8afd95d17e7537abd7
The BL images share common stack management code which provides
one coherent and one cacheable stack for every CPU. BL1 and BL2
just execute on the primary CPU during boot and do not require
the additional CPU stacks. This patch provides separate stack
support code for UP and MP images, substantially reducing the
RAM usage for BL1 and BL2 for the FVP platform.
This patch also provides macros for declaring stacks and
calculating stack base addresses to improve consistency where
this has to be done in the firmware.
The stack allocation source files are now included via
platform.mk rather than the common BLx makefiles. This allows
each platform to select the appropriate MP/UP stack support
for each BL image.
Each platform makefile must be updated when including this
commit.
FixesARM-software/tf-issues#76
Change-Id: Ia251f61b8148ffa73eae3f3711f57b1ffebfa632
BL3-1 architecture setup code programs the system counter frequency
into the CNTFRQ_EL0 register. This frequency is defined by the
platform, though. This patch introduces a new platform hook that
the architecture setup code can call to retrieve this information.
In the ARM FVP port, this returns the first entry of the frequency
modes table from the memory mapped generic timer.
All system counter setup code has been removed from BL1 as some
platforms may not have initialized the system counters at this stage.
The platform specific settings done exclusively in BL1 have been moved
to BL3-1. In the ARM FVP port, this consists in enabling and
initializing the System level generic timer. Also, the frequency change
request in the counter control register has been set to 0 to make it
explicit it's using the base frequency. The CNTCR_FCREQ() macro has been
fixed in this context to give an entry number rather than a bitmask.
In future, when support for firmware update is implemented, there
is a case where BL1 platform specific code will need to program
the counter frequency. This should be implemented at that time.
This patch also updates the relevant documentation.
It properly fixesARM-software/tf-issues#24
Change-Id: If95639b279f75d66ac0576c48a6614b5ccb0e84b
This reverts commit 1c297bf015
because it introduced a bug: the CNTFRQ_EL0 register was no
longer programmed by all CPUs. bl31_platform_setup() function
is invoked only in the cold boot path and consequently only
on the primary cpu.
A subsequent commit will correctly implement the necessary changes
to the counter frequency setup code.
FixesARM-software/tf-issues#125
Conflicts:
docs/firmware-design.md
plat/fvp/bl31_plat_setup.c
Change-Id: Ib584ad7ed069707ac04cf86717f836136ad3ab54
At present, bl1_arch_setup() and bl31_arch_setup() program the counter
frequency using a value from the memory mapped generic timer. The
generic timer however is not necessarily present on all ARM systems
(although it is architected to be present on all server systems).
This patch moves the timer setup to platform-specific code and updates
the relevant documentation. Also, CNTR.FCREQ is set as the specification
requires the bit corresponding to the counter's frequency to be set when
enabling. Since we intend to use the base frequency, set bit 8.
FixesARM-software/tf-issues#24
Change-Id: I32c52cf882253e01f49056f47c58c23e6f422652
Consolidate firmware-design.md and porting-guide.pm so
that recently added sections fit better with
pre-existing sections. Make the documentation more
consistent in use of terminology.
Change-Id: Id87050b096122fbd845189dc2fe1cd17c3003468
The UART used to be initialised in bl1_platform_setup(). This is too
late because there are some calls to the assert() macro, which needs
to print some messages on the console, before that.
This patch moves the UART initialisation code to
bl1_early_platform_setup().
FixesARM-software/tf-issues#49
Change-Id: I98c83a803866372806d2a9c2e1ed80f2ef5b3bcc
This patch adds the following support to the BL3-1 stage:
1. BL3-1 allows runtime services to specify and determine the security
state of the next image after BL3-1. This has been done by adding
the `bl31_set_next_image_type()` & `bl31_get_next_image_type()`
apis. The default security state is non-secure. The platform api
`bl31_get_next_image_info()` has been modified to let the platform
decide which is the next image in the desired security state.
2. BL3-1 exports the `bl31_prepare_next_image_entry()` function to
program entry into the target security state. It uses the apis
introduced in 1. to do so.
3. BL3-1 reads the information populated by BL2 about the BL3-2 image
into its internal data structures.
4. BL3-1 introduces a weakly defined reference `bl32_init()` to allow
initialisation of a BL3-2 image. A runtime service like the Secure
payload dispatcher will define this function if present.
Change-Id: Icc46dcdb9e475ce6575dd3f9a5dc7a48a83d21d1
This patch adds support for loading a BL3-2 image in BL2. In case a
BL3-2 image is found, it also passes information to BL3-1 about where it
is located and the extents of memory available to it. Information about
memory extents is populated by platform specific code.
The documentation has also been updated to reflect the above changes.
Change-Id: I526b2efb80babebab1318f2b02e319a86d6758b0
Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch reworks BL2 to BL3-1 hand over interface by introducing a
composite structure (bl31_args) that holds the superset of information
that needs to be passed from BL2 to BL3-1.
- The extents of secure memory available to BL3-1
- The extents of memory available to BL3-2 (not yet implemented) and
BL3-3
- Information to execute BL3-2 (not yet implemented) and BL3-3 images
This patch also introduces a new platform API (bl2_get_bl31_args_ptr)
that needs to be implemented by the platform code to export reference to
bl31_args structure which has been allocated in platform-defined memory.
The platform will initialize the extents of memory available to BL3-3
during early platform setup in bl31_args structure. This obviates the
need for bl2_get_ns_mem_layout platform API.
BL2 calls the bl2_get_bl31_args_ptr function to get a reference to
bl31_args structure. It uses the 'bl33_meminfo' field of this structure
to load the BL3-3 image. It sets the entry point information for the
BL3-3 image in the 'bl33_image_info' field of this structure. The
reference to this structure is passed to the BL3-1 image.
Also fixes issue ARM-software/tf-issues#25
Change-Id: Ic36426196dd5ebf89e60ff42643bed01b3500517
The FVP platform has a few filenames that begin with fvp_. These are
renamed to plat_ to make it easier to use the FVP port as a template.
Change-Id: I601e6256d5ef3bae81a2e1f5df6de56db5b27069
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
- Update porting guide to describe where files live and how to get
FreeBSD source code.
- Update change-log to describe relocation and new functions.
Change-Id: Id8f30cc7bafdd1064b3a5c5aae958c5aa3fb79f3
Platform setup code has to reserve some memory for storing the
memory layout information. It is populated in early platform setup
code.
blx_get_sec_mem_layout() functions used to return a copy of this
structure. This patch modifies blx_get_sec_mem_layout() functions
so that they now directly return a pointer to their memory layout
structure. It ensures that the memory layout returned by
blx_get_sec_mem_layout() is always up-to-date and also avoids a
useless copy of the meminfo structure.
Also rename blx_get_sec_mem_layout() to blx_plat_sec_mem_layout()
to make it clear those functions are platform specific.
Change-Id: Ic7a6f9d6b6236b14865ab48a9f5eff545ce56551
In the previous psci implementation, the psci_afflvl_power_on_finish()
function would run into an error condition if the value of the context
id parameter in the cpu_on and cpu_suspend psci calls was != 0. The
parameter was being restored as the return value of the affinity level
0 finisher function. A non zero context id would be treated as an
error condition. This would prevent successful wake up of the cpu from
a power down state. Also, the contents of the general purpose
registers were not being cleared upon return to the non-secure world
after a cpu power up. This could potentially allow the non-secure
world to view secure data.
This patch ensures that all general purpose registers are set to ~0
prior to the final eret that drops the execution to the non-secure
world. The context id is used to initialize the general purpose
register x0 prior to re-entry into the non-secure world and is no
longer restored as a function return value. A platform helper
(platform_get_stack()) has been introduced to facilitate this change.
Change-Id: I2454911ffd75705d6aa8609a5d250d9b26fa097c
- Add instructions for contributing to ARM Trusted Firmware.
- Update copyright text in all files to acknowledge contributors.
Change-Id: I9311aac81b00c6c167d2f8c889aea403b84450e5
This patch updates the user guide section about the memory layout.
- Explain the verifications that the linker scripts does on the
global memory layout.
- Refer to the new linker symbols.
- Describe the linker symbols exported to the trusted firmware code.
Change-Id: I033ab2b867e8b9776deb4185b9986bcb8218f286
Juan Castillo
danh-arm
Yuping Luo
Soren Brinkmann
Sandrine Bailleux
Yatharth Kochar
Soby Mathew
Juan Castillo
Vikram Kanigiri
Andrew Thoelke
Achin Gupta
Joakim Bech
Harry Liebel
Jeenu Viswambharan
Ryan Harkin
James Morrissey