Add the basic support for RDC init/config driver,
this module driver can be enhanced more if necessary.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I290dc378d0d85671435f9de46d5aa790b4e006c8
The DMC-620 memory controllers in N1SDP platform has to be put
into CONFIG state before writing to ERR0CTLR0 register to enable
ECC.
This patch fixes the sequence so that DMCs are set to CONFIG
state before writing to ERR0CTLR0 register and moved back to
READY state after writing.
Change-Id: I1252f3ae0991603bb29234029cddb5fbf869c1b2
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
The watchdog is configured with a default value of 256 seconds in order
to implement the Trusted Board Boot Requirements.
For the FVP and Juno platforms, the FWU process relies on a watchdog
reset. In order to automate the test of FWU, the length of this process
needs to be as short as possible. Instead of waiting for those 4 minutes
to have a reset by the watchdog, tell it to reset immediately.
There are no side effects as the value of the watchdog's load register
resets to 0xFFFFFFFF.
Tested on Juno.
Change-Id: Ib1aea80ceddc18ff1e0813a5b98dd141ba8a3ff2
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The features of the previously existing gentbl, genvar and genwrappers
scripts were reimplemented in the romlib_generator.py Python script.
This resulted in more readable and maintainable code and the script
introduces additional features that help dependency handling in
makefiles. The assembly templates were separated from the script logic
and were collected in the 'templates' directory.
The targets and their dependencies were reorganized in the makefile and
the dependency handling of included index files is possible now.
Incremental build is available in case of modifying the index files.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: I79f65fab9dc5c70d1f6fc8f57b2a3009bf842dc5
The AArch32 system registers are not listed if the platform supports
AArch64 only.
Change-Id: I087a10ae6e7cad1bb52775a344635dbac1f12679
Signed-off-by: Imre Kis <imre.kis@arm.com>
This patch adds some common helper code to support a lightweight
platform parameter passing framework between BLs that has already been
used on Rockchip platforms but is more widely useful to others as well.
It can be used as an implementation for the SoC firmware configuration
file mentioned in the docs, and is primarily intended for platforms
that only require a handful of values to be passed and want to get by
without a libfdt dependency. Parameters are stored in a linked list and
the parameter space is split in generic and vendor-specific parameter
types. Generic types will be handled by this code whereas
vendor-specific types have to be handled by a vendor-specific handler
function that gets passed in.
Change-Id: If3413d44e86b99d417294ce8d33eb2fc77a6183f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Add uml sequence and class diagram to illustrate the behavior of the
storage abstraction layer.
Change-Id: I338262729f8034cc3d3eea1d0ce19cca973a91bb
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
When pointer authentication is enabled, the LR value saved on the stack
contains a Pointer Authentication Code (PAC). It must be stripped to
retrieve the return address.
The PAC field is stored on the high bits of the address and defined as:
- PAC field = Xn[54:bottom_PAC_bit], when address tagging is used.
- PAC field = Xn[63:56, 54:bottom_PAC_bit], without address tagging.
With bottom_PAC_bit = 64 - TCR_ELx.TnSZ
Change-Id: I21d804e58200dfeca1da4c2554690bed5d191936
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
The PicoPi iMX7D is a 2 board development board consisting of
a System-on-Module and a carrier baseboard and optimized for
the Internet-of-Things (IoT).
This patch add basic support to this board.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Louis Mayencourt <louis.mayencourt@arm.com>
Change-Id: I009d85819c4f73b7063aab73d0f6ee74e6ef3fc4
For the iMX7 SOCs, part of the code for platform
setup implementation can be reused and made
common for all these SoCs. This patch extracts
the common part for reuse.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Change-Id: I42fd4167e6903416df96a0159a046abf3896e878
When the link goes down (e.g. during a retrain), accessing the device
configuration space can trigger an ARM64 SError interrupt. Such
conditions cannot be predicted, so to avoid a crash the SError is
ignored.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Change-Id: I2b1fd3296cc1c88b9ca1fe21c0924cb324eed58d
This patch adds support for Cortex-A5 FVP for the
DesignStart program. DesignStart aims at providing
low cost and fast access to Arm IP.
Currently with this patch only the primary CPU is booted
and the rest of them wait for an interrupt.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I3a2281ce6de2402dda4610a89939ed53aa045fab
Update the skeleton implementation of the console interface.
The 32 bit version was outdated and has been copied from the 64 bit
version.
Change-Id: Ib3e4eb09402ffccb1a30c703a53829a7bf064dfe
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
* changes:
Enable -Wshift-overflow=2 to check for undefined shift behavior
Update base code to not rely on undefined overflow behaviour
Update hisilicon drivers to not rely on undefined overflow behaviour
Update synopsys drivers to not rely on undefined overflow behaviour
Update imx platform to not rely on undefined overflow behaviour
Update mediatek platform to not rely on undefined overflow behaviour
Update layerscape platform to not rely on undefined overflow behaviour
Update intel platform to not rely on undefined overflow behaviour
Update rockchip platform to not rely on undefined overflow behaviour
Update renesas platform to not rely on undefined overflow behaviour
Update meson platform to not rely on undefined overflow behaviour
Update marvell platform to not rely on undefined overflow behaviour
Pass the ddrBackup variable around instead of making it a global variable.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ib796181247712e464b77f5f8be5f851745727d74
---
NOTE: The camelcase is fixed in later patch.
Partly inline ddr_init_e3.h into ddr_init_e3.c . Drop duplicate
INITDRAM_* macros, which are defined in boot_init_dram.h .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I758661d337a86b6a07f82cd4067fbc149cbaed1e
Replace ad-hoc register accessors with generic ones, remove the ad-hoc
implementation. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I21446a00a38c6a39d6a48652c34f59814074e831
Unify boot_init_dram_regdef_*.h into boot_init_dram_regdef.h and
clean up it's coding style a bit.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Iae3375969c05f80209ebf7b1ebc3633a7f6317ff
Remove the ad-hoc BITn macros and replace them with generic BIT(n) macro.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I5d0b44d6cba5a69895fed505f6ff780d3574907f
Currently we have some pre-rendered versions of certain diagrams
in SVG format. These diagrams have corresponding PlantUML source
that can be rendered automatically as part of the documentation
build, removing the need for any intermediate files.
This patch adds the Sphinx "plantuml" extension, replaces
references to the pre-rendered SVG files within the documents,
and finally removes the SVG files and helper script.
New requirements for building the docs are the
"sphinxcontrib-plantuml" Python module (added to the pip
requirements.txt file) and the Graphviz package (provides the
"dot" binary) which is in the Ubuntu package repositories.
Change-Id: I24b52ee40ff79676212ed7cff350294945f1b50d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Update the revision number in the revision management file.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I94acd1bb53d9d2453e550e2a13b6391b9088ff8d
Modify PFC code and rename macro of MFIS according to Errata of
Hardware User's Manual
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I0ece522647319286350843bbbe8b8ba8b0ae9bac
As it turns out, Gerrit's merge commits don't always respect that format
so these mistakes have to be ignored as false positives.
Change-Id: I4e38d9c34c95588e7916fba4c154f017d8c92dec
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
This patch enables MTE for Normal world if the CPU suppors it. Enabling
MTE for secure world will be done later.
Change-Id: I9ef64460beaba15e9a9c20ab02da4fb2208b6f7d
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Jacky Bai
Soby Mathew
Manoj Kumar
Ambroise Vincent
Imre Kis
Julius Werner
Louis Mayencourt
Hadi Asyrafi
Jun Nie
Remi Pommarel
Usama Arif
Marek Vasut
Madhukar Pappireddy
Paul Beesley
Sandrine Bailleux
Toshiyuki Ogasahara
Chiaki Fujii
John Tsichritzis