The LS1046A is a cost-effective, power-efficient, and highly
integrated system-on-chip (SoC) design that extends the reach
of the NXP value-performance line of QorIQ communications
processors. Featuring power-efficient 64-bit Arm Cortex A72
cores with ECC-protected L1 and L2 cache memories for high
reliability, running up to 1.8 GHz.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Change-Id: I208d9bf1702410463c2b2630d31d0cd4eb7e8837
1. Add scopes for ls1046a and related boards: ls1046ardb,
ls1046aqds, ls1046afwry.
2. Add new scope for NXP QSPI driver.
3. Add new scope for NXP tools.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I68ef7dd25628b393dbfbb8dbf59d5185945ea61c
Armada 3720 BootROM searches for GPT partition with partition type GUID
6828311A-BA55-42A4-BCDE-A89BB5EDECAE and completely ignores GPT
partition name. It does not check for "MARVELL BOOT PARTITION".
This fact is incorrectly documented even in official Marvell Armada 3700
Functional Specification.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I35279f39de2d12148fc16f2730a9a074dc0b58eb
These changes are required to accommodate 3MB for OP-TEE and this
is required for SP's part of optee
Added size macro's for better readability of the code
Moved uboot execution memory from CVM to DDR
Change-Id: I16657c6e336fe7c0fffdee1617d10af8a2c76732
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
diphda platform is now being renamed to corstone1000.
These changes are to replace all the instances and traces
of diphda corstone1000.
Change-Id: I330f3a112d232b99b4721b6bf0236253b068dbba
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Add helper functions to generate event log for imx8mm
when MEASURED_BOOT=1.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: Ifc947d749055787fbda0b39170aa2eb8865b7802
The PIE compilation is used only for BL32, move the ENABLE_PIE to
sp_min-stm32mp1.mk file. Override PIE flags, as sp_min.mk file is
included after the flags are set in Makefile.
The BL2_IN_XIP_MEM was added for a feature not yet upstreamed.
It is then removed from platform.mk file.
Change-Id: If055e51e0f160f99cd4e4cf68ca718d4d693119c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Added a couple of sub-sections (Coverity Scan and Test Configuration)
under "Add build configuration" to update the patch owners on the
sections they need to be aware of while introducing new source files.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I84adb182f9633863aac864df43578249c2269c1e
tamp_bkpr() returns a register address. So use uintptr_t instead of
uin32_t.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Change-Id: I5eddfa525465313dadfec18d128248a968ba74e2
The snprintf code uses the uintptr_t type, which is defined in stdint.h.
We do not include this header explicitly, but get the definition
indirectly through some other header doing so.
However this breaks when snprintf is compiled in isolation (for instance
for unit-testing), so let's add this #include to make things right.
Change-Id: I1299767ee482f5cf1af30c4df2e8f7e596969b41
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In our unsigned_num_print() function we first print the integer into a
local buffer, then put this through alignment and padding and output the
result. For this we use a local buffer, sized by the maximum possible
length of the largest possible number.
However this assumes that the radix is not smaller than 10, which is
indeed the smallest value we pass into this static function at the
moment. To prevent accidents in the future, should we add support for
other radices, add an assert to enforce our assumption.
Unfortunately this cannot be a static assert (CASSERT), since the
compiler is not smart enough to see that the argument is always coming
from a literal.
Change-Id: Ic204462600d9f4c281d899cf9f2c698a0a33a874
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Allow access to PMSNEVFR_EL1 register at NS-EL1 or NS-EL2 when
FEAT_SPEv1p2 is implemented.
Change-Id: I44b1de93526dbe9c11fd061d876371a6c0e6fa9c
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
* changes:
test(el3-runtime): dit is retained on world switch
fix(el3-runtime): set unset pstate bits to default
refactor(el3-runtime): add prepare_el3_entry func
Add the SZ_* macros from 32 to 2G.
This allows removing some defines in raw NAND driver
and STM32MP1 boot device selection code.
Change-Id: I3c4d4959b0f43e785eeb37a43d03b2906b7fcfbc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
The number formatting routine in snprintf was trying to be clever with
the buffer handling, but tripped over its own feet: snprintf() users
expect output to be emitted, even if not everything fits into the
buffer. The current code gives up completely when the buffer is too
small.
Fix those issues and simplify the code on the way, by consequently using
the CHECK_AND_PUT_CHAR() macro, which both checks for the buffer size
correctly, but also keeps track of the number of should-be-printed
characters for the return value.
Change-Id: Ifd2b03b9a73f9279abed53081a2d88720ecbdbc1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Cortex-A710 erratum 2136059 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of the CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR5_EL1[44] to 1 which will cause
the CPP instruction to invalidate the hardware prefetcher state
trained from any EL.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I43a86a365418fb663cc1b6ab1d365b4beddae0bc
Cortex-A710 erratum 2267065 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of the CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR_EL1[22] to 1'b1. Setting
CPUACTLR_EL1[22] will cause the CFP instruction to invalidate
all branch predictor resources regardless of context.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ia9085aaf9b2b6a2b25d03ab36bd3774839fac9aa
Cortex-X2 erratum 2216384 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR5_EL1[17] to 1'b1 followed by
applying an instruction patching sequence.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I3c216161678887c06a28c59644e784e0c7d37bab
Cortex-X2 erratum 2081180 is a Cat B erratum present in r0p0, r1p0
and r2p0 of the Cortex-X2 processor core.
Cortex-X2 SDEN: https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I64bed2fd5b7e12932d6de2ae668786e689885188
Cortex-X2 erratum 2017096 is a Cat B erratum that applies to
revisions r0p0, r1p0 & r2p0. The workaround is to set CPUECLTR_EL1[8]
to 1 which disables store issue prefetching.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I3b740aedc95c2394f6b8d1186014d2b2f640ae05
Add board support for variant 2 of RD-N2 platform which is a four chip
variant with 4 cores on each chip. The "CSS_SGI_PLATFORM_VARIANT" value
is 2 for multi-chip variant. The "CSS_SGI_CHIP_COUNT_MACRO" can be in
the range [1, 4] for multi-chip variant.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I6412106e80e2f17704c796226c2ee9fe808705ba
Previously ufs_write_blocks was memsetting the write buffer before
calling ufs_prepare_cmd, causing zeros to be written to UFS. This change
deletes the memset call so the original buffer contents get written to
UFS.
Signed-off-by: Jorge Troncoso <jatron@google.com>
Change-Id: I3299f11b30e6d7d409408ce11a6759c88607ee18
* changes:
feat(msm8916): allow booting secondary CPU cores
feat(msm8916): setup hardware for non-secure world
feat(gic): allow overriding GICD_PIDR2_GICV2 address
feat(msm8916): initial platform port
docs(msm8916): new port for Qualcomm Snapdragon 410
Add support for the PSCI CPU_ON call to allow booting secondary CPU
cores. On cold boot they need to be booted with a special register
sequence. Also, the "boot remapper" needs to be configured to point to
the BL31_BASE, so the CPUs actually start executing BL31 after reset.
Change-Id: I406c508070ccb046bfdefd51554f12e1db671fd4
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Booting e.g. Linux in the non-secure world does not work with the
msm8916 port yet because essential hardware is not made available to
the non-secure world. Add more platform initialization to:
- Initialize the GICv2 and mark secure interrupts.
Only secure SGIs/PPIs so far. Override the GICD_PIDR2_GICV2
register address in platform_def.h to avoid a failing assert()
because of a (hardware) mistake in Qualcomm's GICv2 implementation.
- Make a timer frame available to the non-secure world.
The "Qualcomm Timer" (QTMR) implements the ARM generic timer
specification, so the standard defines (CNTACR_BASE etc)
can be used.
- Make parts of the "APCS" register region available to the
non-secure world, e.g. for CPU frequency control implemented
in Linux.
- Initialize a platform-specific register to route all SMMU context
bank interrupts to the non-secure interrupt pin, since all control
of the SMMUs is left up to the non-secure world for now.
Change-Id: Icf676437b8e329dead06658e177107dfd0ba4f9d
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Older Qualcomm SoCs seem to have a custom Qualcomm implementation of
the GICv2 specification. It's mostly compliant but unfortunately it
looks like a mistake was made with the GICD_PIDR registers. PIDR2 is
defined to be at offset 0xFE8, but the Qualcomm implementation has it
at 0xFD8.
It looks like the entire PIDR0-3/4-7 block is swapped compared to the
ARM implementation: PIDR0 starts at 0xFD0 (instead of 0xFE0)
and PIDR4 starts at 0xFE0 (instead of 0xFD0).
Actually this only breaks a single assert in gicv2_main.c that checks
the GIC version: assert((gic_version == ARCH_REV_GICV2) ...
In release mode everything seems to work correctly.
To keep the code generic, allow affected platforms to override the
GICD_PIDR2_GICV2 register address in platform_def.h. Since this header
is typically included very early (e.g. from assert.h), add an #ifndef
so the definitions from platform_def.h takes priority.
Change-Id: I2929a8c1726f8d751bc28796567eb30b81eca2fe
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Add tsp service to check the value of the PSTATE DIT bit is as
expected and toggle it's value. This is used to ensure that
the DIT bit is maintained during a switch from the Normal to
Secure worlds and back.
Change-Id: I4e8bdfa6530e5e75925c0079d4fa2795133c5105
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
During a transition to a higher EL some of the PSTATE bits are not set
by hardware, this means that their state may be leaked from lower ELs.
This patch sets those bits to a default value upon entry to EL3.
This patch was tested using a debugger to check the PSTATE values
are correctly set. As well as adding a test in the next patch to
ensure the PSTATE in lower ELs is still maintained after this change.
Change-Id: Ie546acbca7b9aa3c86bd68185edded91b2a64ae5
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Introduce the bare mimimum base of the msm8916 BL31 port. This is
pretty much just a standard platform "skeleton" with CPU/memory
initialization and an UART driver. This allows booting into
e.g. U-Boot with working UART output.
Note that the plat/qti/msm8916 port is completely separate and does not
make use of anything in plat/qti/common at the moment. The main reason
for that is that plat/qti/common is heavily focused around having a
binary "qtiseclib" component, while the MSM8916 port is fully
open-source (and therefore somewhat limited to publicly documented
functionality).
In the future it might be possible to re-use some of the open-source
parts in plat/qti/common (e.g. spmi_arb.c or pm_ps_hold.c) but it's
not strictly required for the basic functionality supported so far.
Change-Id: I7b4375df0f947b3bd1e55b0b52b21edb6e6d175b
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
The Qualcomm Snapdragon 410 is Qualcomm's first 64-bit SoC, released
in 2014 with four ARM Cortex-A53 cores. There are differents variants
(MSM8916, APQ8016(E), ...) that are all very similar. A popular device
based on APQ8016E is the DragonBoard 410c single-board computer,
but the SoC is also used in various mid-range smartphones/tablets.
This commit adds documentation for a minimal, community-maintained port
of TF-A/BL31 for MSM8916. The actual platform port is added in the
following four separate small commits to simplify the review process.
The code is primarily based on the information from the public
Snapdragon 410E Technical Reference Manual [1], combined with a lot of
trial and error to actually make it work.
Note that this port is a pure community effort without any
commercial interests and is not related to Qualcomm in any way.
The main motivation for this port is to have a minimal, updatable
firmware since this old chip does not receive many updates anymore from
Qualcomm. It works quite well for many use cases so I am willing to
maintain it as a "code owner". I have also added Nikita Travkin as
second code owner to help with reviews.
The main limitation so far is the lack of memory protection for TF-A.
This is similar to the ports for the Raspberry Pi but in this case not
a lack of hardware support but rather a lack of documentation. However,
this does not limit the usefulness of the port when used as a minimal
PSCI implementation.
[1]: https://developer.qualcomm.com/download/sd410/snapdragon-410e-technical-reference-manual.pdf
Change-Id: I676adf86061638cfc2f3ae8615470d145e84f172
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
From the new binding, the RCC become secured based on the new
compatible. This must be done only from the secure OS initialisation.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I7f0a62f22bfcca638ddaefc9563df00f89f01653
Add an early UART console to ease debug before UART is fully configured.
This is done under flag STM32MP_EARLY_CONSOLE in the first STM32MP1
platform function called (bl2_el3_early_platform_setup()). It uses the
parameters defined for crash console: STM32MP_DEBUG_USART* macros.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Id6be62368723a0499e97bbf56fb52c166fcbdfad
* changes:
feat(stm32mp1): warn when debug enabled on secure chip
fix(stm32mp1): rework switch/case for MISRA
feat(st): disable authentication based on part_number
* changes:
fix(sptool): add leading zeroes in UUID conversion
feat(tc): enable SMMU for DPU
feat(tc): add reserved memory region for Gralloc
feat(tc): enable GPU
fix(tc): remove the bootargs node
* changes:
feat(st-gpio): do not apply secure config in BL2
feat(st): get pin_count from the gpio-ranges property
feat(st-gpio): allow to set a gpio in output mode
refactor(st-gpio): code improvements
The Event Log sources are added to the source-list of BL1 and BL2
images in the Event Log Makefile. It doesn't seem correct since
some platforms only compile Event Log sources for BL2.
Hence, moved compilation decision of Event Log sources to the
platform makefile.
Change-Id: I1cb96e24d6bea5e091d08167f3d1470d22b461cc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Jiafei Pan
Pali Rohár
Federico Recanati
Arpita S.K
Vishnu Banavath
Ying-Chun Liu (PaulLiu)
Joanna Farley
Manish Pandey
Yann Gautier
Madhukar Pappireddy
Jayanth Dodderi Chidanand
Nicolas Toromanoff
Andre Przywara
Manish V Badarkhe
Bipin Ravi
Aditya Angadi
Jorge Troncoso
Stephan Gerhold
Daniel Boulby
Lionel Debieve