The fdt_getprop() function sets the length to -1 if the property is not
found. We should then not use it later in stm32_clk_parse_fdt_by_name()
in that case. Directly set *nb to 0U and return 0 if the property is not
found.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I19c5c953f392cdc768e0b1f3f240fc99a73a049c
This issue was found by Coverity (CID 376885). The _clk_stm32_get_parent()
return shouldn't be negative. Return the error in this case.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I91eff7e99fcdac9a258100b163fd9b040a9bd2c0
Add new clock driver for STM32MP13. Split the include file to manage
either STM32MP13 or STM32MP15.
Change-Id: Ia568cd12b1d5538809204f0fd2224d51e5d1e985
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
The issue was found by Coverity:
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL4]" when calling
"stm32mp1_check_pll_conf".
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL3]" when calling
"stm32mp1_check_pll_conf".
Check PLL configs are valid before using pllcfg.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I49de849eaf451d0c165a8eb8555112a0a4140bbc
With gcc-11, the -Wformat-signedness warning complains about enum values
that should be printed as unsigned values. Change %d to %u for several
lines in the clock driver.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ia2d24e6feef5e852e0a6bfaa1286fe605f9a16b7
From the new binding, the RCC become secured based on the new
compatible. This must be done only from the secure OS initialisation.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I7f0a62f22bfcca638ddaefc9563df00f89f01653
Some clocks are only required in BL2, like boot devices clocks:
FMC, QSPI.
Some clocks are only used in BL32: Timers, devices that need special
care for independent reset.
Change-Id: Id4ba99afeea5095f419a86f7dc6423192c628d82
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This change removes reference counting support in clock gating
implementation for clocks that rely on non-secure only RCC resources.
As RCC registers are accessed straight by non-secure world for these
clocks, secure world cannot safely store the clock state and even
disabling such clock from secure world can jeopardize the non-secure
world clock management framework and drivers.
As a consequence, for such clocks, stm32_clock_enable() forces the clock
ON without any increment of a refcount and stm32_clock_disable() does
not disable the clock.
Change-Id: I0cc159b36a25dbc8676f05edf2668ae63c640537
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Array stm32mp1_clk_gate[] defines the clock resources. This change
add a secure attribute to the clock: secure upon RCC[TZEN] (SEC),
secure upon RCC[TZEN] and RCC[MCKPROT] (MKP) or always accessible
from non-secure (N_S).
At init, lookup clock tree to check if any of the secure clocks
is derived from PLL3 in which case PLL3 shall be secure.
Note that this change does not grow byte size of stm32mp1_clk_gate[].
Change-Id: I933d8a30007f3c72f755aa1ef6d7e6bcfabbfa9e
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Rework the internal functions __stm32mp1_clk_enable/disable to check for
reference count instead of secure status for a clock.
Some functions now unused can be removed.
Change-Id: Ie4359110d7144229f85c961dcd5a019222c3fd25
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Replace wrong %d with the correct types.
This issue was found with the compilation flag:
-Wformat-signedness
Change-Id: Iec3817a245f964ce444b59561b777ce06c51a60a
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Instead of transmitting an 'enum stm32mp_osc_id', just send
directly the clock name with a 'const char *'
Change-Id: I866b05cbb1685a9b9f80e63dcd5ba7b1d35fc932
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
In case of programmer mode, the bootrom manages to auto-detect
HSE clock configuration. In order to detect a bad device tree
setting in BL2, it will crash during programming if the configuration
is not aligned with the auto-detection.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I230697695745d6282d14b1ebfa6e4c4caa0cd8e2
Support "disabled" status for oscillator in device tree.
At boot time, the clock tree initialization performs the following
tasks:
- enabling of the oscillators present in the device tree and not
disabled,
- disabling of the HSI oscillator if the node is absent or disabled
(always activated by bootROM).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I176276022334f3d97ba0250b54062f0ae970e239
Add a function to get PLL settings from DT:
"cfg" property is mandatory, an error is generated if not found.
"frac" is optional, default value is returned if not found.
"csg" is optional too, a boolean value indicates if it has been
found, and its value is updated.
Store each PLL node validity information, this avoids parsing DT
several times.
Change-Id: I039466fbe1e67d160f7112814e7bb63b661804d0
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Add a UART/USART driver for STM32 with complete a hardware support;
it used for STM32CubeProgrammer support with even parity.
This driver is not used for console, which is already handle
by a simple driver (drivers/st/uart/aarch32/stm32_console.S).
Change-Id: Ia9266e5d177fe7fd09c8a15b81da1a05b1bc8b2d
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
The PLL4 can be used by ROM code as the source clock of USB PHYC and,
in this case, the PLL4 configuration must be preserved
with pll4_preserve to avoid USB disturbance.
This patch also adds an error when the clock tree PLL4 configuration
is not the PLL4 configuration used by ROM code; this error allows to
detect a invalid clock tree.
This commit corrects the coverity issue 343023.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I4bae9312a2db8dd342a38e649513d689b13976bb
On battery powered systems the RTC keeps the date/time across
system reboot.
The RTC clock should not be disabled otherwise the date/time
counter gets stopped.
Tag RTC clock as always on.
Signed-off-by: HE Shushan <shushan.he@st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Change-Id: I6455c3c740d2e5add28255eb84f8ebaf2870d9d8
AXI, MPU and MCU clocks are always on, put them in the list
in the function clock_is_always_on().
Change-Id: I969a442274d2da6c59636f3293de1c31b4c8e3b1
Signed-off-by: Yann Gautier <yann.gautier@st.com>
MPUDIV dividers are stored in a constant array, under bit shifts form.
They must be used in this way by the clock driver.
Change-Id: If758f7a4048eff956067a10a42ab0983a20a000d
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Correct MCU clock parent selector: MCU subsystem clock is derived
from clock PLL3_P, not PLL3.
Correct AXI clock parent selector: AXI subsystem clock is derived
from clock PLL2_P, not PLL2.
This change also renames MCU clock and AXI clock resources to
prevent confusion.
Change-Id: If55618d180e7dce8e4f0977b0e586a6fa8ef28d1
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
To avoid parsing device tree file too often, keep the RCC node
offset value in a variable in fdt_get_rcc_node().
Change-Id: Ibb23ff92247d57c65a23517b8f3473f639794d2a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change the fdt_get_rcc_node function to static, as it is used only in
stm32mp_clkfunc.c file; it is only a cleanup change without functional
modification.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ib4ef110f6f1b16dbaa727a065e40275d3cf58a73
The file is first generated with the peripheral spirit XML file.
And then we add some common definition, to ease driver development.
Change-Id: I4c222cf006caf27cda6da044eaf184ce66bb1442
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Further information such as boot instance are sent over backup
registers. In order to guarantee direct access to backup registers
in uboot, we will keep the RTC clock enabled.
Change-Id: I16572d422bfebbf39190a87db8046df486ce91c8
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
When RTC clock source is HSE, the RTCDIV is not taken into account.
Change-Id: I1613b638e8932c03f3349adb01e13f5294a3bf5d
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The clksrc value contains the RCC register address and the clock
source number. When applying the clock source, we should filter out
the RCC register address from the given value.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I4345b03de7b9afd1df78df4131431cf1eb43ec17
The function stm32mp1_clk_init() returns an int. Return a negative
error value if the device tree is not found.
Change-Id: I422d5fea46c4d63d55a5b62e1db154c1f53f41b7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Retrieve peripheral base address from a define instead of
parsing the device tree. The goal is to improve execution time.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2588c53ad3d4abcc3d7fe156458434a7940dd72b
MCKPROT hardening in RCC mandates that both bits RCC[TZEN] and
RCC[MCKPROT] are enabled. This change fixes stm32mp1_rcc_is_mckprot()
to check both bits, not RCC[MCKPROT] only.
This change also updates stm32mp1_rcc_is_secure() for consistency.
Change-Id: If1f07babdcb5677906ddbf974d9dc17255d4e174
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Introduce stm32mp1_register_clock_parents_secure() in stm32mp1
clock driver to allow platform shared resources to register as
secure the parent clocks of a clock registered as secure.
Change-Id: I53a9ab6aa78ee840ededce67e7b12a84e08ee843
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Adds missing terminal new line character '\n' to debug traces,
fix format as index is an unsigned value and use present tense rather
than past tense in the printed message.
Change-Id: I88c06ef4d3a11d97ff8e96875a3dd0f58a3c98b6
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Enable few system clocks at related BL initialization.
Change-Id: I12b35e8cdc128b993de4a1dc4c6e9d52624dd8d9
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Oscillators and PLLs are not gated on stm32mp_clk_enable/disable()
calls. This change prevents functions to panic when called for such
always-on clocks. Gating these clocks is out of the scope of
this change.
Change-Id: Ie730553dea480b529de942446176db9119587832
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Adds RTC clock to the list of the supported clocks. This allows
stm32mp_clk_*() API functions to enable, disable and set and get
rate for the clock RTC clock.
Change-Id: I8efc3f00b1f22d1912f59d1846994e9e646d6614
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
The current implementation optimizes memory consumed by gateable
clock table by storing bit mask and bit shift with 1 byte each.
The issue is that register selector bit masks above the 7th LSBit
cannot be stored.
This change uses the shift info to shift the mask before it is used,
allowing clock selector register bit fields to be spread on the 32 bits
of the register as long as the mask fits in 8 contiguous bit at most.
This change is needed to add the RTC clock to the gateable clocks table.
Change-Id: I8a0fbcbf20ea383fb3d712f5064d2d307e44465d
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Oscillators, PLLs and some system clocks can be related straight to
a parent clock. Prior this change were only oscillators and few
clocks supported by this look up. This changes adds PLLs and other
system clocks. This enables for flexible use of clock tree exploration
when computing a clock frequency value.
Change-Id: I15ec98023a7095e3120a6954de59a4799d92c66b
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
The STM32 platform code uses its own set of FDT helper functions,
although some of them are fairly generic.
Remove the implementation of fdt_read_uint32_default() and implement it
on top of the newly introduced fdt_read_uint32() function, then convert
all users over.
This also fixes two callers, which were slightly abusing the "default"
semantic.
Change-Id: I570533362b4846e58dd797a92347de3e0e5abb75
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The device tree parsing code for the STM32 platform is using its own FDT
helper functions, some of them being rather generic.
In particular the existing fdt_read_uint32_array() implementation is now
almost identical to the new generic code in fdt_wrappers.c, so we can
remove the ST specific version and adjust the existing callers.
Compared to the original ST implementation the new version takes a
pointer to the DTB as the first argument, and also swaps the order of
the number of cells and the pointer.
Change-Id: Id06b0f1ba4db1ad1f733be40e82c34f46638551a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
To use spinlocks, MMU should be enabled, as well as data cache.
A common function is created (moved from clock file).
It is then used whenever a spinlock has to be taken, in BSEC and clock
drivers.
Change-Id: I94baed0114a2061ad71bd5287a91bf7f1c6821f6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
In order to correctly manage the bring-up of non boot CPUs, the RTCAPB
clock needs to be enabled.
It controls the access to backup registers, where the CPU entrypoint
will be stored.
Change-Id: Ifeeceb4faf64bc9e0778030444f437cc0bb27272
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
The system configuration controller is mainly used to manage
the compensation cell and other IOs and system related settings.
The SYSCFG driver is in charge of configuring masters on the interconnect,
IO compensation, low voltage boards, or pull-ups for boot pins.
All other configurations should be handled in Linux drivers requiring it.
Device tree files are also updated to manage vdd-supply regulator.
Change-Id: I10fb513761a7d1f2b7afedca9c723ad9d1bccf42
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To activate the CSG option, the driver needs to set the bit2
of PLLNCR register = SSCG_CTRL: Spread Spectrum Clock Generator.
This bit should not be cleared when starting the PLL.
Change-Id: Ie5c720ff03655f27a7e7e9e7ccf8295dd046112f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Rework the macro that eases the table definition: the src and msk fields
are now using MASK and SHIFT defines of each source register.
Some macros had then to be modified: _USART1_SEL, _ASS_SEL and _MSS_SEL to
_UART1_SEL, _AXIS_SEL, and _MCUS_SEL to match register fields.
Note: the mask for RCC_ASSCKSELR_AXISSRC is changed from 0x3 to 0x7
to reflect the size of the register field, even if there are only
3 possible clock sources.
The mask value is also corrected for QSPI and FMC clock selection.
Change-Id: I44114e3c1dd37b9fa1be1ba519611abd9a07764c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Those functions are generic for parsing nodes from device tree
hence could be located in generic source file.
The oscillators description structure is also moved to STM32MP1 clock
driver, as it is no more used in stm32mp1_clkfunc and cannot be in a
generic file.
Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Those defines are used in STM32MP1 clock driver.
It is better to put them altogether with already defined registers.
Change-Id: I6f8ad8c2477b947af6f76283a4ef5c40212d0027
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
Yann Gautier
Gabriel Fernandez
Lionel Debieve
Patrick Delaunay
Nicolas Le Bayon
Manish Pandey
HE Shushan
Etienne Carriere
Gabriel Fernandez
Andre Przywara