Use CREATE_SEQ helper macro to create sequence of valid chip counts
instead of manually creating the sequence. This allows a scalable
approach to increase the valid chip count sequence in the future.
Change-Id: I5ca7a00460325c156b9e9e52b2bf656a2e43f82d
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Add `CREATE_SEQ` function to generate sequence of numbers starting from
1 to allow easy comparison of a user defined macro with non-zero
positive numbers.
Change-Id: Ibcb336a223d958154b1007d08c428fbaf1e48664
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Fixes for the following MISRA violations:
- Missing explicit parentheses on sub-expression
- An identifier or macro name beginning with an
underscore, shall not be declared
- Type mismatch in BL1 SMC handlers and tspd_main.c
Change-Id: I7a92abf260da95acb0846b27c2997b59b059efc4
Signed-off-by: Zelalem <zelalem.aweke@arm.com>
* changes:
Fix boot failures on some builds linked with ld.lld.
trusty: generic-arm64-smcall: Support gicr address
trusty: Allow gic base to be specified with GICD_BASE
trusty: Allow getting trusty memsize from BL32_MEM_SIZE instead of TSP_SEC_MEM_SIZE
Fix clang build if CC is not in the path.
When TF-A is built with RESET_TO_BL31=1 option, BL31 is the
first image to be run and should have all the memory allocated
to it except for the memory reserved for Shared RAM at the start
of Trusted SRAM.
This patch fixes FVP BL31 load address and its image size for
RESET_TO_BL31=1 option. BL31 startup address should be set to
0x400_1000 and its maximum image size to the size of Trusted SRAM
minus the first 4KB of shared memory.
Loading BL31 at 0x0402_0000 as it is currently stated in
'\docs\plat\arm\fvp\index.rst' causes EL3 exception when the
image size gets increased (i.e. building with LOG_LEVEL=50)
but doesn't exceed 0x3B000 not causing build error.
Change-Id: Ie450baaf247f1577112f8d143b24e76c39d33e91
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Adding support for 32MHz UART clock and selecting it as the
default UART clock
Change-Id: I9541eaff70424e85a3b5ee4820ca0e7efb040d2c
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Running checkpatch.pl on the codebase and making required changes
Change-Id: I7d3f8764cef632ab2a6d3c355c68f590440b85b8
Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Note: This patch implements in-band messaging protocol only.
ARM has launched a next version of MHU i.e. MHUv2 with its latest
subsystems. The main change is that the MHUv2 is now a distributed IP
with different peripheral views (registers) for the sender and receiver.
Another main difference is that MHUv1 duplex channels are now split into
simplex/half duplex in MHUv2. MHUv2 has a configurable number of
communication channels. There is a capability register (MSG_NO_CAP) to
find out how many channels are available in a system.
The register offsets have also changed for STAT, SET & CLEAR registers
from 0x0, 0x8 & 0x10 in MHUv1 to 0x0, 0xC & 0x8 in MHUv2 respectively.
0x0 0x4 0x8 0xC 0x1F
------------------------....-----
| STAT | | | SET | | |
------------------------....-----
Transmit Channel
0x0 0x4 0x8 0xC 0x1F
------------------------....-----
| STAT | | CLR | | | |
------------------------....-----
Receive Channel
The MHU controller can request the receiver to wake-up and once the
request is removed, the receiver may go back to sleep, but the MHU
itself does not actively put a receiver to sleep.
So, in order to wake-up the receiver when the sender wants to send data,
the sender has to set ACCESS_REQUEST register first in order to wake-up
receiver, state of which can be detected using ACCESS_READY register.
ACCESS_REQUEST has an offset of 0xF88 & ACCESS_READY has an offset
of 0xF8C and are accessible only on any sender channel.
This patch adds necessary changes in a new file required to support the
latest MHUv2 controller. This patch also needs an update in DT binding
for ARM MHUv2 as we need a second register base (tx base) which would
be used as the send channel base.
Change-Id: I1455e08b3d88671a191c558790c503eabe07a8e6
Signed-off-by: Tushar Khandelwal <tushar.khandelwal@arm.com>
* changes:
uniphier: make I/O register region configurable
uniphier: make PSCI related base address configurable
uniphier: make counter control base address configurable
uniphier: make UART base address configurable
uniphier: make pinmon base address configurable
uniphier: make NAND controller base address configurable
uniphier: make eMMC controller base address configurable
DynamIQ based designs have upto 8 CPUs in each cluster. This
patch fixes the device tree node which describes the topology
of the CPU for DynamIQ FVP Model.
Change-Id: I7146bc79029ce38314026d4853e5b6406863725c
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Adding support for generating a semi-random number required for
enabling building TF-A with stack protector support.
TF-A for corstone-700 may now be built using ENABLE_STACK_PROTECTOR=all
Change-Id: I03e1be1a8d4e4a822cf286f3b9ad4da4337ca765
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
* changes:
uniphier: extend boot device detection for future SoCs
uniphier: change block_addressing flag to bool
uniphier: change the return value type of .is_usb_boot() to bool
Pad the .rodata section to 16 bytes as ld.lld does not apply the ALIGN
statement on the .data section to the LMA. Fixes boot failure on builds
where the .rodata section happens to not be 16 bytes aligned.
Change-Id: I4e95678f73d8b326c5fc749dc7d0ce84e2d603f5
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Add SMC_GET_GIC_BASE_GICR option to SMC_FC_GET_REG_BASE and
SMC_FC64_GET_REG_BASE calls for returning the base address of the gic
redistributor added in gic version 3.
Bug: 122357256
Change-Id: Ia7c287040656515bab262588163e0c5fc8f13a21
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Some platforms define GICD_BASE instead of PLAT_ARM_GICD_BASE but the
meaning is the same.
Change-Id: I1bb04bb49fdab055b365b1d70a4d48d2058e49df
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Some platforms define BL32_MEM_SIZE instead of TSP_SEC_MEM_SIZE, but
the meaning is the same.
Change-Id: I93d96dca442e653435cae6a165b1955efe2d2b75
Signed-off-by: Arve Hjønnevåg <arve@android.com>
If CC points to clang the linker was set to ld.lld. Copy the diectory
name from CC is it has one.
Change-Id: I50aef5dddee4d2540b12b6d4e68068ad004446f7
Signed-off-by: Arve Hjønnevåg <arve@android.com>
The I/O register region will be changed in the next SoC. Make it
configurable.
Change-Id: Iec0cbd1ef2d0703ebc7c3d3082edd73791bbfec9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The next SoC will have:
- No boot swap
- SD boot
- No USB boot
Add new fields to handle this.
Change-Id: I772395f2c5dfc612e575b0cbd0657a5fa9611c25
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The register base address will be changed in the next SoC. Make it
configurable.
Change-Id: Ibe07bd9db128b0f7e629916cb6ae21ba7984eca9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The flag, uniphier_emmc_block_addressing, is boolean logic, so
"bool' is more suitable.
uniphier_emmc_is_over_2gb() is not boolean - it returns 1 / 0
depending on the card density, or a negative value on failure.
Rename it to make it less confusing.
Change-Id: Ia646b1929147b644e0df07c46b54ab80548bc3bd
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The register base will be changed in the next SoC. Make it
configurable.
Change-Id: I4a7cf85fe50e4d71db58a3372a71774e43193bd3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This is boolean logic, so "bool" is more suitable.
Change-Id: I439c5099770600a65b8f58390a4c621c2ee487a5
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The next SoC supports the same UART, but the register base will be
changed. Make it configurable.
Change-Id: Ida5c9151b2f3554afd15555b22838437eef443f7
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The register base will be changed in the next SoC. Make it
configurable.
Change-Id: I9fbb6bdd1cf06207618742d4ad7970d911c9bc26
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The next SoC does not support the NAND controller, but make the base
address configurable for consistency and future proof.
Change-Id: I776e43ff2b0408577919b0b72849c3e1e5ce0758
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The next SoC supports the same eMMC controller, but the register
base will be changed. Make it configurable.
Change-Id: I00cb5531bc3d8d49357ad5e922cdd3d785355edf
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Forced hash generation used to always generate hash via RSA encryption.
This patch changes encryption based on ARM_ROTPK_LOCATION.
Also removes setting KEY_ALG based on ARM_ROTPL_LOCATION - there is no
relation between these two.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: Id727d2ed06176a243719fd0adfa0cae26c325005
* changes:
SPMD: enable SPM dispatcher support
SPMD: hook SPMD into standard services framework
SPMD: add SPM dispatcher based upon SPCI Beta 0 spec
SPMD: add support to run BL32 in TDRAM and BL31 in secure DRAM on Arm FVP
SPMD: add support for an example SPM core manifest
SPMD: add SPCI Beta 0 specification header file
This patch adds support to the build system to include support for the SPM
dispatcher when the SPD configuration option is spmd.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: Ic1ae50ecd7403fcbcf1d318abdbd6ebdc642f732
This patch adds support to initialise the SPM dispatcher as a standard
secure service. It also registers a handler for SPCI SMCs exported by
the SPM dispatcher.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: I2183adf826d08ff3fee9aee75f021021162b6477
Manish Pandey
Vijayenthiran Subramaniam
Mark Dykes
Zelalem
Alexei Fedorov
Vishnu Banavath
Avinash Mehta
Khandelwal
Sandrine Bailleux
Madhukar Pappireddy
Morten Borup Petersen
Arve Hjønnevåg
Louis Mayencourt
Olivier Deprez
joanna.farley
Masahiro Yamada
Max Shvetsov
Achin Gupta