Add a new function that allows to enable or disabled filters on
configured regions dynamically. This will avoid the need to
reconfigure the entire attribute and just manage to
enable/disable filters.
Change-Id: If0937ca755bec6c45d3649718147108459682fff
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
This avoids duplicate define of TZC_REGION_NSEC_ALL_ACCESS_RDWR.
And remove the previous TZC400 definitions from stm32mp1_def.h.
Change-Id: I6c72c2a18731f69d855fbce8ce822a21da9364fa
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add bindings that will be used to define DDR regions
and their access rights.
Change-Id: I745a7e580ef2b9e251d53db12c5a0a86dfe34463
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add the UUID into the io policies node that are retrieved
by BL2 using stm32mp_fconf_io.c populate function.
Change-Id: I595d5a41a1e0a27fcc02ea2ab5495d9dbf0e6773
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add required code to support FCONF on STM32MP1 platform.
The new FW_CONFIG DT file will be inside the FIP, and loaded by BL2.
It will be used to configure the addresses where to load other binaries.
BL2 should be agnostic of which BL32 is in the FIP (OP-TEE or SP_min),
so optee_utils.c is always compiled, and some OP-TEE flags are removed.
Change-Id: Id957b49b0117864136250bfc416664f815043ada
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Create all boards fw-config DT files. They all include a generic
stm32mp15-fw-config.dtsi.
Change-Id: Ib9ac8a59e93e01365001b0d11fee41f7c507c08e
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Instead of using a scratch buffer of 512 bytes, we can directly use the
image address and max size. The mmc_block_dev_spec struct info is then
overwritten for each image with this info, except FW_CONFIG and GPT
table which will still use the scratch buffer.
This allows using multiple blocks read on MMC, and so improves the boot
time.
A cache invalidate is required for the remaining data not used from the
first and last blocks read. It is not required for FW_CONFIG_ID,
as it is in scratch buffer in SYSRAM, and also because bl_mem_params
struct is overwritten in this case. This should also not be done if
the image is not found (OP-TEE extra binaries when using SP_min).
Change-Id: If3ecfdfe35bb9db66284036ca49c4bd1be4fd121
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BL2 still uses the STM32 header binary format to be loaded from ROM code.
BL32 and BL33 and their respective device tree files are now put together
in a FIP file.
One DTB is created for each BL. To reduce their sizes, 2 new dtsi file are
in charge of removing useless nodes for a given BL. This is done because
BL2 and BL32 share the same device tree files base.
The previous way of booting is still available, the compilation flag
STM32MP_USE_STM32IMAGE has to be set to 1 in the make command. Some files
are duplicated and their names modified with _stm32_ to avoid too much
switches in the code.
Change-Id: I1ffada0af58486d4cf6044511b51e56b52269817
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Protect BL32 (SP_min) with MMU if OP-TEE is not used.
Validate OP-TEE header with optee_header_is_valid().
Use default values in bl2_mem_params_descs[]. They will be overwritten
in bl2_plat_handle_post_image_load() if OP-TEE is used.
Change-Id: I8614f3a17caa827561614d0f25f30ee90c4ec3fe
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
This new function optee_header_is_valid() allows platform to know
whether OP-TEE OS is loaded from multi-image (using OP-TEE header
image as BL32_IMAGE_ID) or from a single OP-TEE binary image.
The function tee_validate_header() is reworked to return a boolean,
and is now silent.
Change-Id: Idc7dde091f2ada8898f40d02e68c3834ca39d8e8
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Neoverse N2 erratum 2138956 is a Cat B erratum that applies to
revision r0p0 and is still open. This erratum can be avoided by
inserting a sequence of 16 DMB ST instructions prior to WFI or WFE.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I1aac87b3075992f875451e4767b21857f596d0b2
Neoverse N2 erratum 2189731 is a Cat B erratum that applies to
revision r0p0 and is still open. The workaround is to set
CPUACTLR5_EL1[44] to 1 which will cause the CPP instruction to
invalidate the hardware prefetcher state trained from any EL.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Iddc6a59adf9fa3cab560c46f2133e1f5a8b3ad03
Cortex-A710 erratum 2017096 is a Cat B erratum that applies to
revisions r0p0, r1p0 & r2p0 and is still open. The workaround is to
set CPUECLTR_EL1[8] to 1 which disables store issue prefetching.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: If5f61ec30dbc2fab7f2c68663996057086e374e3
Cortex-A710 erratum 2055002 is a Cat B erratum that applies to
revisions r1p0 & r2p0 and is still open. The workaround is to
set CPUACTLR_EL1[46] to force L2 tag ECC inline correction mode.
This workaround works on revision r1p0 & r2p0.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I67be1dce53c4651167d8cee33c116e73b9dafe81
* changes:
refactor(plat/nxp): refine api to read SVR register
refactor(plat/nxp): each errata use a seperate source file
refactor(plat/nxp): use a unified errata api
refactor(plat/soc-lx2160): move errata to common directory
Neoverse N2 erratum 2025414 is a Cat B erratum that applies to
revision r0p0 and is still open. The workaround is to set
CPUECLTR_EL1[8] to 1 which disables store issue prefetching.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ia1c63fb93a1bdb1c3f4cf019a197b2a59233885a
Neoverse N2 erratum 2067956 is a Cat B erratum that applies to
revision r0p0 and is still open. The workaround is to set
CPUACTLR_EL1[46] to force L2 tag ECC inline correction mode.
This workaround works on revision r0p0.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ie92d18a379c66675b5c1c50fd0b8dde130848b21
Neoverse-N2 erratum 2002655 is a Cat B erratum present in r0p0 of
the Neoverse-N2 processor core, and it is still open.
Neoverse-N2 SDEN: https://documentation-service.arm.com/static/61098b4e3d73a34b640e32c9?token=
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I1380418146807527abd97cdd4918265949ba5c01
1. Refined struct soc_info_t definition.
2. Refined get_soc_info function.
3. Fixed some SVR persernality value.
4. Refined API to get cluster numbers and cores per cluster.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I3c20611a523516cc63330dce4c925e6cda1e93c4
This patch adds the necessary files to support
the SolidRun CN913X CEx7 Evaluation Board.
Because the DRAM connectivity and SerDes settings
is shared with the CN913X DB - reuse relevant
board-specific files.
Change-Id: I75a4554a4373953ca3fdf3b04c4a29c2c4f8ea80
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
The common makefile used by every a8k/cn913x platform
(a8k_common.mk) assumed default paths in PLAT_INCLUDES,
BLE/BL31_PORTING_SOURCES. Allow overriding those
variables, in order to avoid code duplication.
It can be helpful in case using multiple board variants
or sharing common settings between different platforms.
Change-Id: Idce603e44ed04d99fb1e3e11a2bb395d552e2bf7
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Cortex-A710 erratum 2081180 is a Cat B erratum present in r0p0, r1p0,
and r2p0 of the Cortex-A710 processor core, and it is still open.
A710 SDEN: https://developer.arm.com/documentation/SDEN1775101/1000
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I1e8c2bc3d8dc326947ccfd91daf9083d666b2542
* changes:
feat(plat/allwinner): add R329 support
refactor(plat/allwinner): allow custom BL31 offset
refactor(plat/allwinner): allow new AA64nAA32 position
fix(plat/allwinner): delay after enabling CPU power
Use a unfied API soc_errata() for each platforms,
add print a INFO message for each enabled errata,
so that it will be easy to check which errata is
enabled on current platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I5eab3f338db6b46c57cbad475819043fc60ca6d3
Will add more Erratas, some errata can be used for multiple
platforms, so move errata to be common code which can
be share between different platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ib149b3eac365bdb593331e9f38f0b89d92c9c0d1
Allwinner R329 is a new dual-core Corte-A53 SoC. Add basical TF-A
support for it, to provide a PSCI implementation containing CPU
boot/shutdown and SoC reset.
Change-Id: I0fa37ee9b4a8e0e1137bf7cf7d614b6ca9624bfe
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Not all Allwinner SoCs have the same arrangement to SRAM A2.
Allow to specify a offset at which BL31 will stay in SRAM A2.
Change-Id: I574140ffd704a796fae0a5c2d0976e85c7fcbdf9
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
In newer Allwiner SoCs, the AA64nAA32 wires are mapped to a new register
called "General Control Register0" in the manual rather than the
"Cluster 0 Control Register0" in older SoCs.
Now the position of AA64nAA32 (reg and bit offset) is defined in a few
macros instead assumed to be at bit offset 24 of
SUNXI_CPUCFG_CLS_CTRL_REG0.
Change-Id: I933d00b9a914bf7103e3a9dadbc6d7be1a409668
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Adds a 1us delay after enabling power to a CPU core, to prevent
inrush-caused CPU crash before it's up.
Change-Id: I8f4c1b0dc0d1d976b31ddc30efe7a77a1619b1b3
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Add TZC master source id for DMA in the SoC space and for the DMAs
behind the I/O Virtualization block to allow the non-secure transactions
from these DMAs targeting DRAM.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: I77a2947b01b4b49a7c1940f09cf62b7b5257657c
Cortex-A710 erratum 1987031 is a Cat B erratum present in r0p0, r1p0,
and r2p0 of the Cortex-A710 processor core, and it is still open.
A710 SDEN: https://documentation-service.arm.com/static/61099dc59ebe3a7dbd3a8a88?token=
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I9bcff306f82328ad5a0f6e9836020d23c07f7179
Cortex-A78 erratum 1952683 is a Cat B erratum present in r0p0 of
the Cortex-A78 processor core, and it was fixed in r1p0.
A78 SDEN : https://developer.arm.com/documentation/SDEN1401784/1400
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I77b03e695532cb13e8f8d3f00c43d973781ceeb0
Lionel Debieve
Yann Gautier
Etienne Carriere
Madhukar Pappireddy
Bipin Ravi
nayanpatel-arm
Manish Pandey
Varun Wadekar
Jiafei Pan
Marcin Wojtas
André Przywara
Joanna Farley
Icenowy Zheng
Vijayenthiran Subramaniam