Add support to retrieve plat_toc_flags value from FIP header flags.
plat_toc_flags is for platform specific use. It is stored in
FIP header by fiptool using --plat-toc-flags option.
Change-Id: Ibadd91b4f28e6503f4426e4efd404bbe512ad124
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Unless specified in the environment, $(CC) expands to some generic
host C compiler like cc or c99. We set our own value for $(CC), but
only few lines later.
Move the first use of the $(CC) variable behind the definition to
correct this.
Change-Id: I45344e063d21ddfe22b7ad77954e85c1c46087bd
Fixes: 1684b8733 ("Use clang assembler when clang compiler is used")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
fconf_dyn_cfg_getter.c calls FCONF_REGISTER_POPULATOR(), which populates
the fconf_populator structure.
However, bl1/bl1.ld.S does not have:
__FCONF_POPULATOR_START__ = .;
KEEP(*(.fconf_populator))
__FCONF_POPULATOR_END__ = .;
So, this is not linked to bl1.elf
We could change either bl1/bl1.lds.S or lib/fconf/fconf.mk to make
them consistent.
I chose to fix up fconf.mk to keep the current behavior.
This is a groundwork to factor out the common code from linker scripts.
Change-Id: I07b7ad4db4ec77b57acf1588fffd0b06306d7293
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
sp_min.ld.S is used for aarch32.
ALIGN(4) is used for alignment of the other structures. I do not think
struct fconf_populator is a special case. Let's use ALIGN(4) here too.
Perhaps, this is just a copy-paste mistake of commit 26d1e0c330
("fconf: necessary modifications to support fconf in BL31 & SP_MIN").
Change-Id: I29f4c68680842c1b5ef913934b4ccf378e9bfcfb
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-D is a preprocessor flag that defines a macro. So, adding it to
BL*_CPPFLAGS makes more sense. You can reference it not only from
.c files but also from .S files.
Change-Id: Ib4f2f27a3ed3eae476a6a32da7ab5225ad0649de
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, BL*_CFLAGS and BL*_LDFLAGS are supported.
For completion, this adds BL*_CPPFLAGS and BL*_ASFLAGS.
My main motivation is to pass -D<macro> to BL*_CPPFLAGS so that
the macro can be used from all source files.
Change-Id: I0ca1e4e26386bef7fed999af140ee7cce7c2f8ef
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
enable_mmu_* has a different function name, so it is not handy in the
shared code. enable_mmu() calls an appropriate one depending on the
exception level.
Change-Id: I0657968bfcb91c32733f75f9259f550a5c35b1c3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There are some cases where we want to run EL-dependent code in the
shared code.
We could use #ifdef, but it leaves slight possibility where we do not
know the exception level at the build-time (e.g. library code).
The counter approach is to use get_current_el(), but it is run-time
detection, so all EL code is linked, some of which might be unneeded.
This commit adds get_current_el_maybe_constant(). This is a static
inline function that returns a constant value if we know the exception
level at build-time. This is mostly the case.
if (get_current_el_maybe_constant() == 1) {
/* do something for EL1 */
} else if (get_current_el_maybe_constant() == 3) {
/* do something for EL3 */
}
If get_current_el_maybe_constant() is build-time constant, the compiler
will optimize out the unreachable code.
If such code is included from the library code, it is not built-time
constant. In this case, it falls back to get_current_el(), so it still
works.
Change-Id: Idb03c20342a5b5173fe2d6b40e1fac7998675ad3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The build system defines the IMAGE_BL* macro when compiling each image.
This is useful to distinguish which image the current file is being
built for by using #if defined(IMAGE_BL2) or #if defined(IMAGE_BL31),
or whatever.
There are some cases where we are more interested in which exception
level the current file is being built for.
include/lib/cpus/{aarch32,aarch64}/cpu_macros.S defines IMAGE_AT_EL3,
but we do not have it globally.
Pass IMAGE_AT_EL1 or IMAGE_AT_EL3 to BL*_CFLAGS so that it is available
from all C code.
The library code (libc.a, libmbedtls.a, etc.) is exceptional cases,
where the code can be shared between BL images.
Other than that, we know the exception level at the build time, and
this macro will be useful in the shared code.
Change-Id: I7c8a1da10726906adfba981cfe8464dff111d6b0
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
1. Necessary changes to platform makefile to include fw_config
device tree and package it in fip.bin
2. Removed hw_config node from fw_config dts as there is no
HW_CONFIG device tree source for sgm775
3. Added mbedtls_heap related properties for TBBR functionality
Change-Id: I26b940c65b17ad2fb5537141f8649785bb0fd4ad
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
* changes:
stm32mp1: use stm32mp_get_ddr_ns_size() function
stm32mp1: set XN attribute for some areas in BL2
stm32mp1: dynamically map DDR later and non-cacheable during its test
stm32mp1: add a function to get non-secure DDR size
Moved SMCCC defines from plat_arm.h to new <smccc_def.h> header
and include this header in all ARM platforms.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4cbc69c7b9307461de87b7c7bf200dd9b810e485
This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.
NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.
Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Use ARRAY_SIZE macro instead of sizeof operator to obtain the maximum
number of SCMI channels supported on the platform.
Change-Id: Id922bb548af98ac99b4ac0c34e38e589e5a80b2d
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
* changes:
plat/arm/board/arm_fpga: Compile with additional CPU libraries
plat/arm/board/arm_fpga: Enable position-independent execution
plat/arm/board/arm_fpga: Enable port for alternative cluster configurations
plat/arm/board/arm_fpga: Initialize the Generic Interrupt Controller
plat/arm/board/arm_fpga: Initialize the System Counter
plat/arm/board/arm_fpga: Add PSCI implementation for FPGA images
plat/arm/board/arm_fpga: Use preloaded BL33 alternative boot flow
plat/arm/board/arm_fpga: Enable basic BL31 port for an FPGA image
On DynamIQ CPU FVPs, stats test cases are failing when
hardware-assisted coherency is enabled due to a corrupt
timestamp value. Investigation of the issue indicates that
on these models the timestamp value is stored in cache
instead of memory. This patch flushes the dcache when the
timestamp is stored to make sure it is stored in memory.
Change-Id: I05cd54ba5991a5a96dd07f1e08b5212273201411
Signed-off-by: Zelalem <zelalem.aweke@arm.com>
Notify if fw_config dt is either not available or not loaded from fip.
Change-Id: I4dfcbe5032503d97f532a3287c5312c581578b68
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
This change is part of the goal of enabling the port to be compatible
with multiple FPGA images.
BL31 behaves differently depending on whether or not the CPUs in the
system use cache coherency, and as a result any CPU libraries that are
compiled together must serve processors that are consistent in this
regard.
This compiles a different set of CPU libraries depending on whether or
not the HW_ASSISTED_COHERENCY is enabled at build-time to indicate the
CPUs support hardware-level support for cache coherency. This build
flag is used in the makefile in the same way as the Arm FVP port.
Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: I18300b4443176b89767015e3688c0f315a91c27e
This allows the BL31 port to run with position-independent execution
enabled so that it can be ran from any address in the system.
This increases the flexibility of the image, allowing it to be ran from
other locations rather than only its hardcoded absolute address
(currently set to the typical DRAM base of 2GB). This may be useful for
future images that describe system configurations with other memory
layouts (e.g. where SRAM is included).
It does this by setting ENABLE_PIE=1 and changing the absolute
address to 0. The load address of bl31.bin can then be specified by
the -l [load address] argument in the fpga-run command (additionally,
this address is required by any preceding payloads that specify the
start address. For ELF payloads this is usually extracted automatically
by reading the entrypoint address in the header, however bl31.bin is a
different file format so has this additional dependency).
Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: Idd74787796ab0cf605fe2701163d9c4b3223a143
This change is part of the goal of enabling the port to be compatible
with multiple FPGA images.
The BL31 port that is uploaded as a payload to the FPGA with an image
should cater for a wide variety of system configurations. This patch
makes the necessary changes to enable it to function with images whose
cluster configurations may be larger (either by utilizing more
clusters, more CPUs per cluster, more threads in each CPU, or a
combination) than the initial image being used for testing.
As part of this, the hard-coded values that configure the size of the
array describing the topology of the power domain tree are increased
to max. 8 clusters, max. 8 cores per cluster & max 4 threads per core.
This ensures the port works with cluster configurations up to these
sizes. When there are too many entries for the number of available PEs,
e.g. if there is a variable number of CPUs between clusters, then there
will be empty entries in the array. This is permitted and the PSCI
library will still function as expected. While this increases its size,
this shouldn't be an issue in the context of the size of BL31, and is
worth the trade-off for the extra compatibility.
Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: I7d4ae1e20b2e99fdbac428d122a2cf9445394363
This initializes the GIC using the Arm GIC drivers in TF-A.
The initial FPGA image uses a GIC600 implementation, and so that its
power controller is enabled, this platform port calls the corresponding
implementation-specific routines.
Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: I88d5a073eead4b653b1ca73273182cd98a95e4c5
This sets the frequency of the system counter so that the Delay Timer
driver programs the correct value to CNTCRL. This value depends on
the FPGA image being used, and is 10MHz for the initial test image.
Once configured, the BL31 platform setup sequence then enables the
system counter.
Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: Ieb036a36fd990f350b5953357424a255b8ac5d5a
Sheetal Tigadoli
Scott Branden
Mark Dykes
laurenw-arm
Olivier Deprez
Sandrine Bailleux
Ahmad Fatoum
Manish Pandey
Masahiro Yamada
Madhukar Pappireddy
Manish V Badarkhe
Alexei Fedorov
Aditya Angadi
Zelalem
Oliver Swede