* changes:
Tegra194: remove L2 ECC parity protection setting
Tegra194: sip_calls: mark unused parameter as const
Tegra194: implement handler to retrieve power domain tree
Tegra194: mce: fix function declaration conflicts
Tegra194: add macros to read GPU reset status
Tegra194: skip notifying MCE in fake system suspend
Tegra194: Enable system suspend
ROMLIB extract functions code from BL images to put them inside ROM.
This has for effect to reduce the size of the BL images.
This patch take this size reduction into consideration to optimize the
memory layout of BL2.
A new "PLAT_ARM_BL2_ROMLIB_OPTIMIZATION" macro is defined and used to
reduce "PLAT_ARM_MAX_BL2_SIZE". This allows to remove the gap between
BL1 and BL2 when ROMLIB is used and provides more room for BL31.
The current memory gain is 0x6000 for fvp and 0x8000 for juno.
Change-Id: I71c2c2c63b57bce5b22a125efaefc486ff3e87be
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
The number of levels in the topology has not changed but the count of
processing elements on the lowest layer is now multiplied by the value
of FVP_MAX_PE_PER_CPU.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: Ia1568a40ea33dbbbcdfab6c8ab6d19f4db0b8eb4
This patch removes the code to enable L2 ECC parity protection
bit, as Tegra194 does not have any Cortex-A57 CPUs.
Change-Id: I4b56595fea2652e8bb8ab4a7ae7567278ecff9af
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
This patch marks the unused parameter 'cookie', to the
plat_sip_handler() function, as const to fix an issue
flagged by the MISRA scan.
Change-Id: I53fdd2caadf43fef17fbc3a50a18bf7fdbd42d39
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements the platform handler to return the pointer
to the power domain tree.
Change-Id: I74ea7002c7a461a028b4a252bbd354256fdc0647
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
To fix MISRA defects, remove union in t186 MCE drivers
this driver should compatible with that.
Change-Id: I09e96a1874dd86626c7e41c92a1484a84e387402
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
This patch adds macros to check the GPU reset status bit, before
resizing the VideoMem region.
Change-Id: I4377c1ce1ac6d3bd14c7db83526b99d72bdb41ed
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
- In pre-silicon platforms, MCE might not be ready
to support system suspend(SC7)
- Thus, in fake system suspend mode, bypass waiting for
MCE's acknowledgment to enter system suspend
Change-Id: Ia3c010ce080c4283ab1233ba82e3e577adca34f6
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
This patch does the following:
1. Populate the cstate info corresponding to system suspend
and communicate it to the MCE
2. Ask for MCE's acknowledgement for entering system suspend
and instruct MCE to get inside system suspend once
permitted
Change-Id: I51e1910e24a7e61e36ac2d12ce271290e433e506
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
* changes:
Tegra194: add macros for security carveout configuration registers
Tegra194: add 'TEGRA_TMRUS_SIZE' macro
Tegra194: Fix TEGRA186_SMMU_CTX_SIZE
Tegra194: Dont run MCE firmware on Emulation
Tegra194: remove GPU, MPCORE and PTC registers from streamid list
Tegra194: Support SMC64 encoding for MCE calls
Tegra194: Enable MCE driver
Tegra194: enable SMMU
Tegra194: add support for multiple SMMU devices
Tegra194: add SMMU and mc_sid support
Tegra194: psci: support for 64-bit TZDRAM base
Tegra194: base commit for the platform
Revert "Tegra: Add support for fake system suspend"
N1SDP supports multichip configuration wherein n1sdp boards are
connected over high speed coherent CCIX link, for now only dual-chip
is supported.
Whether or not multiple chips are present is dynamically probed by
SCP firmware and passed on to TF-A, routing table will be set up
only if multiple chips are present.
Initialize GIC-600 multichip operation by overriding the default GICR
frames with array of GICR frames and setting the chip 0 as routing
table owner.
Change-Id: Ida35672be4bbf4c517469a5b330548d75e593ff2
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Earlier PIE support was enabled for all arm platforms when
RESET_TO_BL31=1, but later on it was restricted only to FVP with patch
SHA d4580d17 because of n1sdp platform.
Now it has been verified that PIE does work for n1sdp platform also, so
enabling it again for all arm platforms.
Change-Id: I05ad4f1775ef72e7cb578ec9245cde3fbce971a5
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
1. Switch ARMPLL_LL/CCIPLL/MAINPLL/MPLL control to SPM
2. Switch CLKSQ1/TDCLKSQ control to SPM
3. Switch ck_off/axi_26m control to SPM
BUG=b:136980838
TEST=system suspend/resume passed
Change-Id: I5c8506f7cf16d5cdaeb5ef8caa60a2992a361e18
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
ARM platform can have a non-contiguous GICR frames. For instance, a
multi socket platform can have two or more GIC Redistributor frames
which are 4TB apart. Hence it is necessary for the `gicv3_rdistif_probe`
function to probe all the GICR frames available in the platform.
Introduce `plat_arm_override_gicr_frames` function which platforms can
use to override the default gicr_frames which holds the GICR base
address of the primary cpu.
Change-Id: I1f537b0d871a679cb256092944737f2e55ab866e
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
N1SDP supports multichip configuration wherein n1sdp boards are
connected over high speed coherent CCIX link for now only dual-chip is
supported.
A single instance of TF-A runs on master chip which should be aware of
slave chip's CPU and memory topology.
This patch updates platform macros to include remote chip's information
and also ensures that a single version of firmware works for both single
and dual-chip setup.
Change-Id: I75799fd46dc10527aa99585226099d836c21da70
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Platform information structure holds information about platform's DDR
size(local/remote) which will be used to zero out the memory before
enabling the ECC capability as well as information about multichip
setup. Multichip and remote DDR information can only be probed in SCP,
SDS region will be used by TF-A to get this information at boot up.
This patch introduces a new SDS to store platform information, which is
populated dynamically by SCP Firmware.previously used mem_info SDS is
also made part of this structure itself.
The platform information is also passed to BL33 by copying it to Non-
Secure SRAM.
Change-Id: I4781dc6a7232c3c0a3219b164d943ce9e3e469ee
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Running TF-A from non-standard location such as DRAM is useful for some
SRAM heavy use-cases. Allow the TF-A binary to be executed from an
arbitrary memory location.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: Icd97926e4d97f37d7cde4a92758a52f57d569111
This patch adds macros defining the generalised security carveout
registers. These macros help us program the TZRAM carveout access
and the Video Protect Clear carveout access.
Change-Id: I8f7b24b653fdb702fb57a4097801cb3eae050294
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch defines the macro for the TEGRA_TMRUS aperture size.
Change-Id: I33fb674c6a7be8d02971667e7bf8650b7adc62ef
Signed-off-by: Steven Kao <skao@nvidia.com>
TEGRA186_SMMU_CTX_SIZE should match the numbe of elements
in smmu_ctx_regs, which is defined in smmu_plat_config.h.
The current number of elements are 0x490.
Change-Id: If0614ea8ef8b6a8f5da1a3279abaf9255eb76420
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Dont run MCE firmware on pre-silicon emulation platforms
Change-Id: I2a8d653e46f494621580ca92271a18e62f648859
Signed-off-by: Rohit Khanna <rokhanna@nvidia.com>
GPU, MPCORE and PTC clients are changed and not going through SMMU.
Removing it from streamid list.
Change-Id: I14b450a11f02ad6c1a97e67e487d6d624911d019
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
This patch uses SMC64 encoding for all MCE SMC calls originating
from the linux kernel.
Change-Id: Ic4633de5c638566012db033bbaf8c9d9343acdc0
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enable MCE driver for T19x SoC. The MCE driver
takes care of the communication with the MCE firmware to
achieve:
- Cold boot
- Warm boot
- Core/Cluster/System Power management
- Custom MCE requests
Change-Id: I75854c0b649a691e9b244d9ed9fc1c19743e3e8d
Signed-off-by: Steven Kao <skao@nvidia.com>
This patch adds support for all three SMMU devices present on the SoC.
The following changes have been done:
Add SMMU devices to the memory map
Update register read and write functions
Change-Id: I0007b496d2ae7264f4fa9f605d4b0a15fa747a0f
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Define mc sid and txn override regs and sec cfgs.
Create array for mc sid override regs and sec config that is
used to initialize mc.
Add smmu ctx regs array to hold register values during suspend.
Change-Id: I7b265710a9ec2be7dea050058bce65c614772c78
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
This patch fixes the variable width to store the TZDRAM base
address used to resume from System Suspend.
Change-Id: I3c18eb844963f39f91b5ac45e3709f3354bcda0c
Signed-off-by: Steven Kao <skao@nvidia.com>
This patch creates the base commit for the Tegra194 platform, from
Tegra186 code base.
Change-Id: I1c77e4984f7ff39655f3fb79633d13d533707ede
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This reverts commit c41df8fda84b9bc56bbb2347fb902f64b1bb557e
Fake system suspend relies on software running on EL3
to trigger a warm reset.
Revert enabling fake system suspend, as the software
running on El3 is not allowed to trigger a warm reset.
Change-Id: I6035f2a7bcb0a4ad50a62c5bc5239226c625ee5e
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
There are some platforms which uses MPIDR Affinity level 3 for storing
extra affinity information e.g. N1SDP uses it for keeping chip id in a
multichip setup, for such platforms MPIDR validation should not fail.
This patch adds Aff3 bits also as part of mpidr validation mask, for
platforms which does not uses Aff3 will not have any impact as these
bits will be all zeros.
Change-Id: Ia8273972fa7948fdb11708308d0239d2dc4dfa85
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Introduce timeout_init_us/timeout_elapsed() delay tracking with CNTPCT.
timeout_init_us(some_timeout_us); returns a reference to detect
timeout for the provided microsecond delay value from current time.
timeout_elapsed(reference) return true/false whether the reference
timeout is elapsed.
Cherry picked from OP-TEE implementation [1].
[1] commit 33d30a74502b ("core: timeout detection support")
Minor:
- Remove stm32mp platform duplicated implementation.
- Add new include in marvell ble.mk
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iaef6d43c11a2e6992fb48efdc674a0552755ad9c
a5ds only has always-on power domain and there is no power control
present. However, without the pwr_domain_off handler, the kernel
panics when the user will try to switch off secondary cores. The
a5ds_pwr_domain_off handler will prevent kernel from crashing,
i.e. the kernel will attempt but fail to shut down the secondary CPUs
if the user tries to switch them offline.
Change-Id: I3c2239a1b6f035113ddbdda063c8495000cbe30c
Signed-off-by: Usama Arif <usama.arif@arm.com>
This patch adds mapping for secure FLASH0 for qemu/virt and
qemu/qemu_sbsa platforms. This change is targeted for sbsa but since both
platforms share common code, changes in common defines was necessary.
For qemu_sbsa, this patch adds necessary mapping in order to boot without
semi-hosting from secure FLASH0. EFI need to stay in FLASH1 (share it with
variables) since it need to "run in place" in non secure domain. Changes
for this are under RFC at edk2-platforms mailing list:
https://patches.linaro.org/patch/171327/
(edk2-platforms/Platform/Qemu/SbsaQemu/SbsaQemu.dsc).
In docs qemu/virt is described as using semi-hosting, therefore this change
should be orthogonal to existing assumptions while giving possibility to
store both bl1 and fip in FLASH0 at some point (additional changes required
for that).
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I782bc3637c91c01eaee680b3c5c408e24b4b6e28
This patch introduces Qemu SBSA platform.
Both platform specific files where copied from qemu/qemu with changes for
DRAM base above 32bit and removal of ARMv7 conditional defines/code.
Documentation is aligned to rest of SBSA patches along the series and
planed changes in edk2-platform repo.
FixesARM-software/tf-issues#602
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I8ebc34eedb2268365e479ef05654b2df1b99128c
* changes:
stm32mp1: add authentication support for stm32image
bsec: move bsec_mode_is_closed_device() service to platform
crypto: stm32_hash: Add HASH driver
joanna.farley
Alexei Fedorov
Max Shvetsov
Sandrine Bailleux
Louis Mayencourt
Imre Kis
Harvey Hsieh
Varun Wadekar
Anthony Zhou
Vignesh Radhakrishnan
Tejal Kudav
Paul Beesley
Manish Pandey
Roger Lu
Vijayenthiran Subramaniam
Andrew F. Davis
Steven Kao
Stefan Kristiansson
Rohit Khanna
Pritesh Raithatha
Lionel Debieve
Soby Mathew
Usama Arif
kenny liang
Radoslaw Biernacki
Artsem Artsemenka